Debuggers, Programmers & In-Circuit Emulators

New items

8.12.00 J-Link PRO, SEGGER

J-Link PRO Probe J-Link PRO is a JTAG/SWD programming and debug probe supporting a large number of processor cores and comes with integrated licenses for unlimited breakpoints in Flash memory, RDI/RDDI, GDB Server and J-Flash. An Ethernet connection allows use of the debug probe far away from the PC, over a hard-wired or wireless network. Supported Processors ARM7/9/11, Cortex-A5/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5 Microchip PIC32 Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N Features Direct download into Flash memory of most microcontrollers supported Download speed up to 3MB/sec 10/100 Ethernet via RJ45 socket Web interface for easy TCP/IP configuration (built-in webserver) Supports concurrent access to CPU by multiple applications Automatic core recognition Supports multiple target interfaces: JTAG, SWD Supports SWD/SWV (Serial Wire Debug / Serial Wire Viewer) Supports J-Flash Production Flash programming Maximum target interface speed: 50MHz Maximum SWO sampling speed: 100MHz Wide target voltage range: +1.2V to +5Vdc Embedded Trace Buffer (ETB) support Various target adapters and optical isolation adapters available RDI / RDDI interface Powered via USB connector Support for adaptive clocking All JTAG signals can be monitored, target voltage can be measured Target power supply: 300mA with overload protection Target interface: JTAG/SWD 20-pin PC interface: USB 2.0 HS or Ethernet RJ45 socket Galvanic isolation from host system via Ethernet Power and RESET LEDs Dimensions: 100 x 53 x 27mm Cross-platform support (runs on Windows, Linux, Mac OS X) Memory viewer (J-Mem) included Software Developer Kit (SDK) available Free software updates, 2 years of support Target Adapters & Adapter Cables 131-1325 J-Link Target Power Supply Adapter 131-1326 J-Link 1...

Product Detail

New items

EASE1000 V2, LAPIS

LAPIS Semiconductor offers starter kits and a reference board for creating application programs that reduce development load.

Product Detail

New items

8.18.00 J-Trace PRO for Cortex M, SEGGER

J-Trace PRO Probe J-Trace PRO for Cortex-M enables continuous streaming trace via its Gigabit Ethernet interface, lifting the limitations of internal buffers and slow data transmission. J-Trace PRO can capture complete traces over long periods - thereby enabling the recording of infrequent, hard-to-reproduce bugs. It also offers extended trace features, such as code coverage and execution profiling. Supported Processors ARM Cortex-M0/M0+/M1/M3/M4/M7 Features Supports Streaming Trace (trace data sent to PC/debugger in real time, unlimited trace buffer) Full J-Link functionality Gigabit Ethernet interface via RJ45 socket USB 2.0 HS interface (480MBit/s) Target interface: JTAG/SWD 20-pin, JTAG/SWD + Trace 19-pin JTAG speed: 50MHz Supports Cortex-M devices up to 150MHz ETM trace clock (300MHz CPU clock) Supports ARM Embedded Trace Macrocell (ETM) Supports ARM Embedded Trace Buffer (ETB) Supports ARM Micro Trace Buffer (MTB) 64MB on-board trace buffer for legacy one-shot tracing mode Dimensions: 123 x 68 x 30mm Free software updates, 2 years of support Supplied with Ethernet cable, USB cable, 0.05in 20-pin ribbon trace cable, 0.1in 20-pin ribbon cable

Product Detail

New items

5.09.01 Flasher STM8, SEGGER

Flasher STM8 Programmer Flasher STM8 programmer for STM8x series of microcontrollers with on-chip Flash memory. Supported Processors STMicroelectronics STM8S/STM8L/STM8AF/STM8AL Features Integrated optical isolation between host and target system Target interface: 4-pin SWIM connector Host interface: USB 2.0 or RS-232 DE9 connector 10/100 Ethernet via RJ45 connector Target voltage can be measured & monitored during program run Target power supply via pin 1 of 4-pin interface (up to 300mA with overload protection) Windows PC software included ASCII command interface to control Flasher without PC program Free software updates, 2 years of support Supplied with Ethernet cable, 4-pin target ribbon cable, RS-232 serial cable, USB cable

Product Detail

New items

8.08.00 J-LINK BASE, SEGGER

J-Link BASE Probe J-Link BASE is a JTAG programming and debug probe supporting a large number of processor cores. J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others. Supported Processors ARM7/9/11, Cortex-A5/A7/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5 Microchip PIC32 Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N Features Direct download into Flash memory of most microcontrollers supported Download speed up to 1MB/second Supports unlimited breakpoints in Flash memory Supports breakpoints in external Flash memory of Cortex-M systems Supports concurrent access to CPU by multiple applications GDB Server included: allows using J-Link remotely via TCP/IP Supports multiple target interfaces: JTAG, SWD Supports SWV/SWO (Serial Wire Viewer / Serial Wire Output) Wide target voltage range: +1.2V to +3.3V, +5V tolerant Supports JTAG chains with multiple devices Embedded Trace Buffer (ETB) support Various target adapters and optical isolation adapters available Powered via USB connector Support for adaptive clocking All JTAG signals can be monitored, target voltage can be measured Target power supply: 300mA with overload protection Target interface: JTAG 20-pin PC interface: USB 2.0 Dimensions: 100 x 53 x 27mm Cross-platform support (runs on Windows, Linux, Mac OS X) Supported by all major IDEs Software Developer Kit (SDK) available Free software updates, 1 year of support Target Adapters & Adapter Cables 131-1325 J-Link Target Power Supply Adapter 131-1326 J-Link 10-pin Needle Adapter 131-1327 J-Link RX100/200/600 MCU Adapter 131-1328 J-Link 19-pin ARM Cortex-M MCU Adapter 131-1329 J-Link 9-pin ARM Cortex-M MCU Adapter 131-1330 J-Link 14-pin ARM 7/9/11 MCU Adapter 131-1331 J-Lin...

Product Detail

New items

8.08.90 J-Link EDU, SEGGER

J-Link EDU J-Link EDU is a JTAG programming and debug probe supporting a large number of processor cores. Functionally identical to the J-Link BASE, but with limited support, it's aimed at the Education and Hobbyist market. J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others. Supported Processors ARM7/9/11, Cortex-A5/A7/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5 Microchip PIC32 Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N Features Direct download into Flash memory of most microcontrollers supported Download speed up to 1MB/second Supports concurrent access to CPU by multiple applications GDB Server included: allows using J-Link remotely via TCP/IP Supports multiple target interfaces: JTAG, SWD Supports SWV/SWO (Serial Wire Viewer / Serial Wire Output) Wide target voltage range: +1.2V to +3.3V, +5V tolerant Supports JTAG chains with multiple devices Embedded Trace Buffer (ETB) support Various target adapters and optical isolation adapters available Powered via USB connector Support for adaptive clocking All JTAG signals can be monitored, target voltage can be measured Target power supply: 300mA with overload protection Target interface: JTAG 20-pin PC interface: USB 2.0 Dimensions: 100 x 53 x 27mm Cross-platform support (runs on Windows, Linux, Mac OS X) Supported by all major IDEs Support via the SEGGER on-line forum: forum.segger.com Target Adapters & Adapter Cables 131-1325 J-Link Target Power Supply Adapter 131-1326 J-Link 10-pin Needle Adapter 131-1327 J-Link RX100/200/600 MCU Adapter 131-1328 J-Link 19-pin ARM Cortex-M MCU Adapter 131-1329 J-Link 9-pin ARM Corte...

Product Detail

New items

8.07.00 JTAG Isolator, SEGGER

J-Link ARM JTAG Isolator Board The J-Link JTAG Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin JTAG-ARM connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application. Compatible Probes J-Link BASE, J-Link PRO, J-Link ULTRA+, J-Link PLUS , Flasher Portable, Flasher ARM Features 1kV DC optical isolation +3.3V and +5Vdc target operation supported Powered from probe and target JTAG 20-pin connection with TRST, TDI, TMS, TCK, RTCK, TDO and RESET signals Power consumption on target side: 35mA typical JTAG frequency: Up to 4MHz 3 x LEDs: Probe Power, Target Power and Target RESET

Product Detail

New items

5.07.01 Flasher ARM, SEGGER

Flasher ARM Programmer The Flasher ARM is a programming tool for microcontrollers with on-chip or external Flash memory and an ARM core. Flasher ARM is designed for programming Flash targets with the J-Flash software or stand-alone. In addition, Flasher ARM has all of the J-Link functionality. Supported Processors ARM Cortex-A: A5/A7/A8/A9/A12/A15/A17 ARM Cortex-M: M0/M0+/M1/M3/M4/M7 ARM Legacy: ARM7, ARM9, ARM11 Features Stand-alone JTAG/SWD programmer (Once set up, Flasher can be controlled without the use of PC program) 10/100 Ethernet via RJ45 connector Supports internal and external Flash memory devices 64MB memory for storage of target program Serial in target programming supported Data files can be updated as mass storage or via J-Flash Host interface: USB 2.0 or RS-232 DE9 connector Target interface: JTAG/SWD 20-pin Powered through USB connection Can be used as J-Link (JTAG emulator) with download speed up to 1MB/sec Programming speed typically between 30KB/sec and 1MB/sec Max programming speed depends on target hardware and max programming speed of the Flash memory ASCII command interface to control Flasher without use of PC program Authorized Flashing allows limit to number of Flash programming cycles and to protect the Flasher against non-authorized access in case of external production Dimensions: 121 x 66 x 30mm Free software updates, 2 years of support Supplied with Ethernet cable, 20-pin target ribbon cable, RS-232 serial cable, USB cable

Product Detail

New items

8.08.28 J-Link PLUS, SEGGER

J-Link PLUS Probe J-Link PLUS is a JTAG programming and debug probe supporting a large number of processor cores. J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others. Comes with integrated licenses for unlimited breakpoints in Flash memory, RDI / RDDI and J-Flash. Supported Processors ARM7/9/11, Cortex-A5/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5 Microchip PIC32 Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N Features Direct download into Flash memory of most microcontrollers supported Download speed up to 1MB/second Supports unlimited breakpoints in Flash memory Supports breakpoints in external Flash memory of Cortex-M systems Supports concurrent access to CPU by multiple applications Remote Server included. Allows using J-Link remotely via TCP/IP GDB Server included Supports J-Flash Production Flash programming Supports multiple target interfaces: JTAG, SWD Supports SWV/SWO (Serial Wire Viewer / Serial Wire Output) Wide target voltage range: +1.2V to +3.3V, +5V tolerant Supports JTAG chains with multiple devices Embedded Trace Buffer (ETB) support Various target adapters and optical isolation adapters available RDI / RDDI interface DLL available Powered via USB connector Support for adaptive clocking All JTAG signals can be monitored, target voltage can be measured Target power supply: 300mA with overload protection Target interface: JTAG 20-pin PC interface: USB 2.0 Dimensions: 100 x 53 x 27mm Cross-platform support (runs on Windows, Linux, Mac OS X) Supported by all major IDEs Software Developer Kit (SDK) available Free software updates, 1 year of support Target Adapters & Adapter Cables 131-1325 J-Link Target Power Supply Adapter 131-1326 J-Link ...

Product Detail

New items

8.16.28 J-Link ULTRA+, SEGGER

J-Link ULTRA+ Probe J-Link ULTRA+ is a JTAG/SWD programming and debug probe supporting a large number of processor cores. It features seamless integration into the IAR Embedded Workbench IDE and comes with integrated licenses for unlimited breakpoints in Flash memory, RDI / RDDI and J-Flash. Supported Processors ARM7/9/11, Cortex-A5/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5 Microchip PIC32 Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N Features Direct download into Flash memory of most microcontrollers supported Download speed up to 3MB/sec Supports unlimited breakpoints in Flash memory Supports breakpoints in external Flash memory of Cortex-M systems Supports concurrent access to CPU by multiple applications Remote Server included. Allows using J-Link remotely via TCP/IP Automatic core recognition Supports SWD/SWV (Serial Wire Debug / Serial Wire Viewer) Supports J-Flash Production Flash programming Maximum target interface speed: 50MHz Maximum SWO sampling speed: 100MHz Wide target voltage range: +1.2V to +3.3V, +5V tolerant Embedded Trace Buffer (ETB) support Various target adapters and optical isolation adapters available RDI / RDDI interface Powered via USB connector Support for adaptive clocking All JTAG signals can be monitored, target voltage can be measured Target power supply: 300mA with overload protection Target interface: JTAG/SWD 20-pin PC interface: USB 2.0 HS Dimensions: 100 x 53 x 27mm Cross-platform support (runs on Windows, Linux, Mac OS X) Flash DLL available Software Developer Kit (SDK) available Free software updates, 1 year of support Target Adapters & Adapter Cables 131-1325 J-Link Target Power Supply Adapter 131-1326 J-Link 10-pin Needle Adapter 131-1327 J-Link RX100/200/600 MCU Adapter ...

Product Detail

Debuggers, Programmers & In-Circuit Emulators

New Items

8.12.00 J-Link PRO, SEGGER

EASE1000 V2, LAPIS

8.18.00 J-Trace PRO for Cortex M, SEGGER

5.09.01 Flasher STM8, SEGGER

8.08.00 J-LINK BASE, SEGGER

8.08.90 J-Link EDU, SEGGER

8.07.00 JTAG Isolator, SEGGER

5.07.01 Flasher ARM, SEGGER

8.08.28 J-Link PLUS, SEGGER

8.16.28 J-Link ULTRA+, SEGGER

FAQs