Featured Products
P&F Dual Channel Zener Diode Barriers Using a dual channel barrier impedes a direct grounding of the intrinsically...
Extended Sensing Range These Pepperl + Fuchs inductive proximity sensors are cylindrical in design and are availabl...
Extended Sensing Range These Pepperl + Fuchs inductive proximity sensors are cylindrical in design and are availabl...
Pepperl + Fuchs LFL2-CK-U Cylindrical Float Switches The LFL2-CK-U range of float switches from Pepperl + Fuchs ar...
Miniature Block Style LED status display Stock no. 339-5418 has a PBT sensing face and a nickel plated brass housi...
Basic Series - Mini Flat PBT flat housing and sensing face Ingress protection to IP67 LED indicator Operating tempe...
Pepperl + Fuchs Fibre Optic The Pepperl + Fuchs fibre optic is made up of PVC material. Its thread size is M6. Used...
P&F Dual Channel Zener Diode Barriers Using a dual channel barrier impedes a direct grounding of the intrinsically...
Connection Leads A range of connection leads suitable for use with Pepperl and Fuchs photoelectic sensors....
Cylindrical Barrel Stainless steel housing with PBT sensing face Senses a wide variety of materials (see table) Swi...
Popular Categories For Pepperl + Fuchs
Popular Items
Popular items
Popular items
Popular items
Z961, Pepperl + Fuchs
P&F Dual Channel Zener Diode Barriers
Using a dual channel barrier impedes a direct grounding of the intrinsically safe circuit. The ground is only made in the event of a failure, if the zener diodes conduct. This circuit also suppresses influences of external circuits.
Typical application - thermocouples
Isolation Barriers
Pepperl+Fuchs shunt zener diode barriers are for use as safety interfaces between intrinsically safe and non-intrinsically safe circuits. They are manufactured from Makrolon® and designed to conduct electrical signals - in either direction - between safe and hazardous areas and to limit the amount of energy which can be transferred from a safe to a hazardous area in the event of fault conditions occurring in the safe area. All systems shown are licensed for [EEx ia] IIC Class 1, Div1, Groups A-G
Popular items
NBB8-18GM50-E0, Pepperl + Fuchs
Extended Sensing Range
These Pepperl + Fuchs inductive proximity sensors are cylindrical in design and are available with an extended sensing range of up to 30mm to suit a number of different applications.
Features and benefits
LED indication
Embeddable or flush installation
IP67
Supply voltage 10 to 30Vdc
Short circuit and reverse polarity protection
Pre-wired types have 2m PVC cable
Plug-in types have M12 type V1 connector
Pepperl + Fuchs
Popular items
NBB2-8GM50-E2, Pepperl + Fuchs
Extended Sensing Range
These Pepperl + Fuchs inductive proximity sensors are cylindrical in design and are available with an extended sensing range of up to 30mm to suit a number of different applications.
Features and benefits
LED indication
Embeddable or flush installation
IP67
Supply voltage 10 to 30Vdc
Short circuit and reverse polarity protection
Pre-wired types have 2m PVC cable
Plug-in types have M12 type V1 connector
Pepperl + Fuchs
Popular items
LFL2-CK-U-PVC5, Pepperl + Fuchs
Pepperl + Fuchs LFL2-CK-U Cylindrical Float Switches
The
LFL2-CK-U
range of float switches from Pepperl + Fuchs are cylindrical float switches with a sleeve design. They each come with a 5m cable available in a choice of materials.
These float switches have a cylindrical sleeve design. Please refer to the list below for information on ball design options too.
The LFL2-CK-U float switches feature a switching element that, if it deviates from the horizontal position, activates a micro switch (change-over contact).
How is it mounted?
The LFL2-CK-U float switches can be mounted through the side of the tank, through a cable gland more than or equal to G1A.
How big is it?
The sleeve measures 135 x 29.2 mm. The cable is 5m long.
Versions Available:
(
339-5238
) - LFL2-CK-U-PVC5 - Sleeve with PVC Cable
(
350-2060
) - LFL2-CK-U-PUR5 - Sleeve with PUR Cable
(
350-2076
) - LFL2-CK-U-CSM5 - Sleeve with CSM Cable
(
339-5244
) - LFL2-BK-U-PVC5 - Ball with PVC Cable
(
350-2082
) - LFL2-BK-U-PUR5 - Ball with PUR Cable
(
350-2098
) - LFL2-BK-U-CSM5 - Ball with CSM Cable
Popular items
NBB1,5-F41-E2, Pepperl + Fuchs
Miniature Block Style
LED status display
Stock no.
339-5418
has a PBT sensing face and a nickel plated brass housing
Stock no.
339-5402
has a PPS sensing face and housing
Short circuit protection pulsing, and reverse polarity protection apart from stock no.
339-5402
which has reverse polarity only
Prewired 2m of 3 core PVC cable
Block and Limit Switch Style
All dc switches in this range have reverse polarity and short circuit protection. Embeddable versions can be flush mounted in metal.
Popular items
CBN2-F46-E2, Pepperl + Fuchs
Basic Series - Mini Flat
PBT flat housing and sensing face
Ingress protection to IP67
LED indicator
Operating temperature range -25 to +70°C
Pre-Wired with 2m of 0.14mm² PVC cable
Can be cable tie mounted via slots or Screw mounted via fixing holes
50x25x5mm (LxHxW)
Pepperl & Fuchs
Capacitive sensors can also be used to detect non metallic materials i.e. plastic, paper, fluids etc. Can be used for the detection of levels, or as a hand-held switch.
Popular items
KLR-C02-2,2-2,0-K70, Pepperl + Fuchs
Pepperl + Fuchs Fibre Optic
The Pepperl + Fuchs fibre optic is made up of PVC material. Its thread size is M6. Used for communication purposes. Following precautions must be taken while using this fibre optic: · Excessive tensile loads will lead to destruction· Contact with petrol or organic solvents must be prevented· Fibre optics must not be twisted or kinked
Features and Benefits
Accessories like cable cutter, cable protection and mounting brackets are provided along with this cable
Wide operating temperature ranges between -55°C and 70°C
Popular items
Z966, Pepperl + Fuchs
P&F Dual Channel Zener Diode Barriers
Using a dual channel barrier impedes a direct grounding of the intrinsically safe circuit. The ground is only made in the event of a failure, if the zener diodes conduct. This circuit also suppresses influences of external circuits.
Typical application - thermocouples
Isolation Barriers
Pepperl+Fuchs shunt zener diode barriers are for use as safety interfaces between intrinsically safe and non-intrinsically safe circuits. They are manufactured from Makrolon® and designed to conduct electrical signals - in either direction - between safe and hazardous areas and to limit the amount of energy which can be transferred from a safe to a hazardous area in the event of fault conditions occurring in the safe area. All systems shown are licensed for [EEx ia] IIC Class 1, Div1, Groups A-G
Popular items
V31-GM-2M-PVC, Pepperl + Fuchs
Connection Leads
A range of connection leads suitable for use with Pepperl and Fuchs photoelectic sensors.
Knurled nut suitable for tool assembly
Immunity to vibration, with mechanical latching
Gold plated contacts
Popular items
CBB8-18GS75-E2, Pepperl + Fuchs
Cylindrical Barrel
Stainless steel housing with PBT sensing face
Senses a wide variety of materials (see table)
Switching distance adjustment can be set over a wide range with the potentiometer
LED indicator
M12 version - 50mm overall length (fully threaded)
M18 version - 65mm overall length and 75.5mm (fully threaded)
M30 versions - 79mm overall length (60mm thread)
For mounting brackets see stock nos.
280-6844
,
280-6850
&
280-6866
respectively
Note
Stock no.
307-395
cannot be powered up without a load connected.
Pepperl & Fuchs
Capacitive sensors can also be used to detect non metallic materials i.e. plastic, paper, fluids etc. Can be used for the detection of levels, or as a hand-held switch.
New Items
New items
Z961, Pepperl + Fuchs
P&F Dual Channel Zener Diode Barriers
Using a dual channel barrier impedes a direct grounding of the intrinsically safe circuit. The ground is only made in the event of a failure, if the zener diodes conduct. This circuit also suppresses influences of external circuits.
Typical application - thermocouples
Isolation Barriers
Pepperl+Fuchs shunt zener diode barriers are for use as safety interfaces between intrinsically safe and non-intrinsically safe circuits. They are manufactured from Makrolon® and designed to conduct electrical signals - in either direction - between safe and hazardous areas and to limit the amount of energy which can be transferred from a safe to a hazardous area in the event of fault conditions occurring in the safe area. All systems shown are licensed for [EEx ia] IIC Class 1, Div1, Groups A-G
New items
NBB8-18GM50-E0, Pepperl + Fuchs
Extended Sensing Range
These Pepperl + Fuchs inductive proximity sensors are cylindrical in design and are available with an extended sensing range of up to 30mm to suit a number of different applications.
Features and benefits
LED indication
Embeddable or flush installation
IP67
Supply voltage 10 to 30Vdc
Short circuit and reverse polarity protection
Pre-wired types have 2m PVC cable
Plug-in types have M12 type V1 connector
Pepperl + Fuchs
New items
NBB2-8GM50-E2, Pepperl + Fuchs
Extended Sensing Range
These Pepperl + Fuchs inductive proximity sensors are cylindrical in design and are available with an extended sensing range of up to 30mm to suit a number of different applications.
Features and benefits
LED indication
Embeddable or flush installation
IP67
Supply voltage 10 to 30Vdc
Short circuit and reverse polarity protection
Pre-wired types have 2m PVC cable
Plug-in types have M12 type V1 connector
Pepperl + Fuchs
New items
LFL2-CK-U-PVC5, Pepperl + Fuchs
Pepperl + Fuchs LFL2-CK-U Cylindrical Float Switches
The
LFL2-CK-U
range of float switches from Pepperl + Fuchs are cylindrical float switches with a sleeve design. They each come with a 5m cable available in a choice of materials.
These float switches have a cylindrical sleeve design. Please refer to the list below for information on ball design options too.
The LFL2-CK-U float switches feature a switching element that, if it deviates from the horizontal position, activates a micro switch (change-over contact).
How is it mounted?
The LFL2-CK-U float switches can be mounted through the side of the tank, through a cable gland more than or equal to G1A.
How big is it?
The sleeve measures 135 x 29.2 mm. The cable is 5m long.
Versions Available:
(
339-5238
) - LFL2-CK-U-PVC5 - Sleeve with PVC Cable
(
350-2060
) - LFL2-CK-U-PUR5 - Sleeve with PUR Cable
(
350-2076
) - LFL2-CK-U-CSM5 - Sleeve with CSM Cable
(
339-5244
) - LFL2-BK-U-PVC5 - Ball with PVC Cable
(
350-2082
) - LFL2-BK-U-PUR5 - Ball with PUR Cable
(
350-2098
) - LFL2-BK-U-CSM5 - Ball with CSM Cable
New items
NBB1,5-F41-E2, Pepperl + Fuchs
Miniature Block Style
LED status display
Stock no.
339-5418
has a PBT sensing face and a nickel plated brass housing
Stock no.
339-5402
has a PPS sensing face and housing
Short circuit protection pulsing, and reverse polarity protection apart from stock no.
339-5402
which has reverse polarity only
Prewired 2m of 3 core PVC cable
Block and Limit Switch Style
All dc switches in this range have reverse polarity and short circuit protection. Embeddable versions can be flush mounted in metal.
New items
CBN2-F46-E2, Pepperl + Fuchs
Basic Series - Mini Flat
PBT flat housing and sensing face
Ingress protection to IP67
LED indicator
Operating temperature range -25 to +70°C
Pre-Wired with 2m of 0.14mm² PVC cable
Can be cable tie mounted via slots or Screw mounted via fixing holes
50x25x5mm (LxHxW)
Pepperl & Fuchs
Capacitive sensors can also be used to detect non metallic materials i.e. plastic, paper, fluids etc. Can be used for the detection of levels, or as a hand-held switch.
New items
KLR-C02-2,2-2,0-K70, Pepperl + Fuchs
Pepperl + Fuchs Fibre Optic
The Pepperl + Fuchs fibre optic is made up of PVC material. Its thread size is M6. Used for communication purposes. Following precautions must be taken while using this fibre optic: · Excessive tensile loads will lead to destruction· Contact with petrol or organic solvents must be prevented· Fibre optics must not be twisted or kinked
Features and Benefits
Accessories like cable cutter, cable protection and mounting brackets are provided along with this cable
Wide operating temperature ranges between -55°C and 70°C
New items
Z966, Pepperl + Fuchs
P&F Dual Channel Zener Diode Barriers
Using a dual channel barrier impedes a direct grounding of the intrinsically safe circuit. The ground is only made in the event of a failure, if the zener diodes conduct. This circuit also suppresses influences of external circuits.
Typical application - thermocouples
Isolation Barriers
Pepperl+Fuchs shunt zener diode barriers are for use as safety interfaces between intrinsically safe and non-intrinsically safe circuits. They are manufactured from Makrolon® and designed to conduct electrical signals - in either direction - between safe and hazardous areas and to limit the amount of energy which can be transferred from a safe to a hazardous area in the event of fault conditions occurring in the safe area. All systems shown are licensed for [EEx ia] IIC Class 1, Div1, Groups A-G
New items
V31-GM-2M-PVC, Pepperl + Fuchs
Connection Leads
A range of connection leads suitable for use with Pepperl and Fuchs photoelectic sensors.
Knurled nut suitable for tool assembly
Immunity to vibration, with mechanical latching
Gold plated contacts
New items
CBB8-18GS75-E2, Pepperl + Fuchs
Cylindrical Barrel
Stainless steel housing with PBT sensing face
Senses a wide variety of materials (see table)
Switching distance adjustment can be set over a wide range with the potentiometer
LED indicator
M12 version - 50mm overall length (fully threaded)
M18 version - 65mm overall length and 75.5mm (fully threaded)
M30 versions - 79mm overall length (60mm thread)
For mounting brackets see stock nos.
280-6844
,
280-6850
&
280-6866
respectively
Note
Stock no.
307-395
cannot be powered up without a load connected.
Pepperl & Fuchs
Capacitive sensors can also be used to detect non metallic materials i.e. plastic, paper, fluids etc. Can be used for the detection of levels, or as a hand-held switch.
Don’t hesitate to ask questions for better clarification.