Featured Products
3SE5 Hinge Switch The SIRIUS 3SE5 Series hinge switch is designed for monitoring hinged doors and flaps. These mech...
SIPART PS2 Electropneumatic Positioner The SIPART PS2 electropositioner from Siemens offers reliable and smooth seq...
Selector Switches - Non-illuminated, 2 Position The 3SB35 series of selector switches are metal, round and have a m...
Surge Suppressor Varistors Surge Suppressor Varistors for plugging onto contactors with or without auxillary contac...
Accessories for 3TB, 3TC Contactors Terminal covers suitable for use with the 3TB and 3TC range of contactors.
Series 5ST2 Accessories Accessories suitable for use with the 5ST2 circuit breakers. Siemens Distribution Boards...
S7-1200 - Communications Boards For fast, high-performance serial data exchange via point-to-point connection Simpl...
S7-1200 - Communications Modules PROFIBUS PROFIBUS DP communication modules for S7-1200 The modules use the PROFIBU...
Contactor Relays - 3RH2 Range Climate-proof, finger safe contactor relays. RC elements, varistors, diodes or diode...
Contactor Relays - 3RH2 Range Climate-proof, finger safe contactor relays. RC elements, varistors, diodes or diode...
Contactor Relays - 3RH2 Range Climate-proof, finger safe contactor relays. RC elements, varistors, diodes or diode...
Contactor Relays - 3RH2 Range Climate-proof, finger safe contactor relays. RC elements, varistors, diodes or diode...
Popular Categories For Siemens
Popular Items
Popular items
3SE5112-0LU22, Siemens
3SE5 Hinge Switch
The SIRIUS 3SE5 Series hinge switch is designed for monitoring hinged doors and flaps. These mechanical position switches offer excellent protection from tampering thanks to the fixed, positive pivoting point connection between switch and door hinge. They have a standard enclosure according to EN 50047 and EN 50041 and a very small operating angle. Simultaneous shut down and signalling is provided in addition by the snap-action contacts.
For the mechanical monitoring of protective doors or flaps
Protection up to Cat 4 (EN 954-1), Up to SIL 3 IEC 62061
Snap on contacts
Simple, fast wiring offers approx 20 to 25% reduction in connection time
Cable entry M20 x 1.5
Actuator head can be rotated in 22.5° increments
Note
Actuators are supplied, accessories are for spares.
Hinge Switch
Popular items
6DR5010-0EG00-0AA0, Siemens
SIPART PS2 Electropneumatic Positioner
The SIPART PS2 electropositioner from Siemens offers reliable and smooth sequences in the widest range of process industries. It can control the entire spectrum of valves safely and perform special tasks with extreme precision.
SIPART PS2 shows its strengths in applications where there are extreme vibrations due to its Non-Contacting Sensor (NCS).
The SIPART PS2 is also equipped with comprehensive diagnostic functions as standard. It continuously checks the actuator and valve in order to provide advanced warning of expensive failures during operation.
The versatility of the SIPART PS2 ensures that it runs safely, reliably and accurately.
Features and Benefits
Indoor or outdoor use
Reliable and smooth sequences
Easy mounting on various actuators
Non-Contacting Sensor
Can be used in hazardous areas
Low internal air consumption rate
Diagnostic interaction
Product Application Information
Chemicals
Oil and gas
Energy production
Food and beverages
Pulp and paper
Water/waste water
Pharmaceutical industry
Offshore plants
The electropneumatic positioner is used for the continuous control of process valves with pneumatic drives.
Approvals
IECEx, ATEX, FM and CSA
Positioner
Popular items
3SB3202-2HA11, Siemens
Selector Switches - Non-illuminated, 2 Position
The 3SB35 series of selector switches are metal, round and have a mounting diameter of 22mm. This series of actuators are supplied with a holder.
Non-illuminated
2 switching positions (O – I)
Momentary contact or latching versions
Standard, heavy duty or with long handle versions
Protection rating of IP67
PHASE OUT NOTIFICATION
This product is in obsolescence mode and is due for discontinuation by the manufacturer. We recommend that you review the new pushbutton range SIRIUS ACT which is the alternative range proposed by the manufacturer. Please refer to the 3SB3 / SIRIUS ACT cross-reference guide located in the technical reference section.
Popular items
3TX4490-3J, Siemens
Surge Suppressor Varistors
Surge Suppressor Varistors for plugging onto contactors with or without auxillary contact blocks.
Popular items
3TX6526-3B, Siemens
Accessories for 3TB, 3TC Contactors
Terminal covers suitable for use with the 3TB and 3TC range of contactors.
Popular items
5ST2134, Siemens
Series 5ST2 Accessories
Accessories suitable for use with the 5ST2 circuit breakers.
Siemens Distribution Boards & Accessories
Type B characteristic offers instantaneous short circuit response level of 3-5 x normal rated current, making it suitable for circuits with moderate inrush currents such as filament lamps, heating loads and most domestic/small building protection applications.,Type C characteristic offers short circuit response of 5-10 x normal rated current, making it ideal for circuits with higher inrush currents such as motor control and fluorescent lighting installations in industrial buildings where nuisance tripping might occur if a faster type was used.
Popular items
6ES7241-1CH30-1XB0, Siemens
S7-1200 - Communications Boards
For fast, high-performance serial data exchange via point-to-point connection
Simple parameterization with STEP 7 Basic
Plugged directly into the CPU
Siemens Communication Module
The Siemens communication module for RS485 serial interfacing is a highly efficient device used ideal for fast and efficient serial data exchange. It is used with S7-1200 series PLCs. The device has advanced features like diagnostic indicators that make it an ideal communication module for various industrial applications.
Features and Benefits
Supports message based Freeport
Ambient operating temperature range from -20°C to 60°C
Input current of 50mA drawn from 5V backplane bus
Applications
Industrial automation
Robotics
Automobiles industry
Certifications
IP20 rated
CE mark
RCM approval
FM approval
Popular items
6GK7243-5DX30-0XE0, Siemens
S7-1200 - Communications Modules PROFIBUS
PROFIBUS DP communication modules for S7-1200
The modules use the PROFIBUS DP-V1 protocol
Configure the modules with SIMATIC STEP 7
Siemens PLC I/O Module
The Siemens communication module enables connection of SIMATIC S7-1200 to PROFIBUS as DP master module. It enables communication with other S7 controllers based on S7 communication provision. It supports all the standard baud rates between 9.6 Kbit/s and 12MBit/s.
Features and Benefits
Input power supply rating is 24VDC
The module uses the PROFIBUS DP-V1 protocol
Up to 8 connections are possible in multi-protocol mode
Up to 3 connections are possible with PG/OP communication
STEP 7 Basic/Professional configuration software are also available
Applications
Industrial automation
Robotics
Automobiles industry
Certifications
IP20 rated
ANSI/ESD S20.20:2014
BSEN 61340-5-1:2007
Popular items
3RH2131-1BB40, Siemens
Contactor Relays - 3RH2 Range
Climate-proof, finger safe contactor relays. RC elements, varistors, diodes or diode assemblies (combination of a diode and a Zener diode) can be plugged onto all contactor relays for damping opening surges in the coil.
Size S00
High degree if contact stability at low voltages & current
Suitable for use with solid-state circuits with currents ≥ 1 mA at a voltage of ≥ 17 V
Capable of expansion by up to four contacts through use of snap-on auxiliary switch blocks
Note
The OFF-delay of the NO contact and the ON-delay of the NC contact are increased if the contactor coils are attenuated against voltage peaks (noise suppression diode 6 to 10 times; diode assemblies 2 to 6 times, varistor +2 to 5 ms).
Standards
IEC 60947-1, EN 60947-1, IEC 60947-4-1, EN 60947-4-1, IEC 60947-5-1, EN 60947-5-1.
Siemens Sirius Range Contactor & Control Relays
Popular items
3RH2140-1AF00, Siemens
Contactor Relays - 3RH2 Range
Climate-proof, finger safe contactor relays. RC elements, varistors, diodes or diode assemblies (combination of a diode and a Zener diode) can be plugged onto all contactor relays for damping opening surges in the coil.
Size S00
High degree if contact stability at low voltages & current
Suitable for use with solid-state circuits with currents ≥ 1 mA at a voltage of ≥ 17 V
Capable of expansion by up to four contacts through use of snap-on auxiliary switch blocks
Note
The OFF-delay of the NO contact and the ON-delay of the NC contact are increased if the contactor coils are attenuated against voltage peaks (noise suppression diode 6 to 10 times; diode assemblies 2 to 6 times, varistor +2 to 5 ms).
Standards
IEC 60947-1, EN 60947-1, IEC 60947-4-1, EN 60947-4-1, IEC 60947-5-1, EN 60947-5-1.
Siemens Sirius Range Contactor & Control Relays
Popular items
3RH2140-1AP00, Siemens
Contactor Relays - 3RH2 Range
Climate-proof, finger safe contactor relays. RC elements, varistors, diodes or diode assemblies (combination of a diode and a Zener diode) can be plugged onto all contactor relays for damping opening surges in the coil.
Size S00
High degree if contact stability at low voltages & current
Suitable for use with solid-state circuits with currents ≥ 1 mA at a voltage of ≥ 17 V
Capable of expansion by up to four contacts through use of snap-on auxiliary switch blocks
Note
The OFF-delay of the NO contact and the ON-delay of the NC contact are increased if the contactor coils are attenuated against voltage peaks (noise suppression diode 6 to 10 times; diode assemblies 2 to 6 times, varistor +2 to 5 ms).
Standards
IEC 60947-1, EN 60947-1, IEC 60947-4-1, EN 60947-4-1, IEC 60947-5-1, EN 60947-5-1.
Siemens Sirius Range Contactor & Control Relays
Popular items
3RH2362-2BB40, Siemens
Contactor Relays - 3RH2 Range
Climate-proof, finger safe contactor relays. RC elements, varistors, diodes or diode assemblies (combination of a diode and a Zener diode) can be plugged onto all contactor relays for damping opening surges in the coil.
Size S00
High degree if contact stability at low voltages & current
Suitable for use with solid-state circuits with currents ≥ 1 mA at a voltage of ≥ 17 V
Capable of expansion by up to four contacts through use of snap-on auxiliary switch blocks
Note
The OFF-delay of the NO contact and the ON-delay of the NC contact are increased if the contactor coils are attenuated against voltage peaks (noise suppression diode 6 to 10 times; diode assemblies 2 to 6 times, varistor +2 to 5 ms).
Standards
IEC 60947-1, EN 60947-1, IEC 60947-4-1, EN 60947-4-1, IEC 60947-5-1, EN 60947-5-1.
Siemens Sirius Range Contactor & Control Relays
New Items
New items
3SE5112-0LU22, Siemens
3SE5 Hinge Switch
The SIRIUS 3SE5 Series hinge switch is designed for monitoring hinged doors and flaps. These mechanical position switches offer excellent protection from tampering thanks to the fixed, positive pivoting point connection between switch and door hinge. They have a standard enclosure according to EN 50047 and EN 50041 and a very small operating angle. Simultaneous shut down and signalling is provided in addition by the snap-action contacts.
For the mechanical monitoring of protective doors or flaps
Protection up to Cat 4 (EN 954-1), Up to SIL 3 IEC 62061
Snap on contacts
Simple, fast wiring offers approx 20 to 25% reduction in connection time
Cable entry M20 x 1.5
Actuator head can be rotated in 22.5° increments
Note
Actuators are supplied, accessories are for spares.
Hinge Switch
New items
6DR5010-0EG00-0AA0, Siemens
SIPART PS2 Electropneumatic Positioner
The SIPART PS2 electropositioner from Siemens offers reliable and smooth sequences in the widest range of process industries. It can control the entire spectrum of valves safely and perform special tasks with extreme precision.
SIPART PS2 shows its strengths in applications where there are extreme vibrations due to its Non-Contacting Sensor (NCS).
The SIPART PS2 is also equipped with comprehensive diagnostic functions as standard. It continuously checks the actuator and valve in order to provide advanced warning of expensive failures during operation.
The versatility of the SIPART PS2 ensures that it runs safely, reliably and accurately.
Features and Benefits
Indoor or outdoor use
Reliable and smooth sequences
Easy mounting on various actuators
Non-Contacting Sensor
Can be used in hazardous areas
Low internal air consumption rate
Diagnostic interaction
Product Application Information
Chemicals
Oil and gas
Energy production
Food and beverages
Pulp and paper
Water/waste water
Pharmaceutical industry
Offshore plants
The electropneumatic positioner is used for the continuous control of process valves with pneumatic drives.
Approvals
IECEx, ATEX, FM and CSA
Positioner
New items
3SB3202-2HA11, Siemens
Selector Switches - Non-illuminated, 2 Position
The 3SB35 series of selector switches are metal, round and have a mounting diameter of 22mm. This series of actuators are supplied with a holder.
Non-illuminated
2 switching positions (O – I)
Momentary contact or latching versions
Standard, heavy duty or with long handle versions
Protection rating of IP67
PHASE OUT NOTIFICATION
This product is in obsolescence mode and is due for discontinuation by the manufacturer. We recommend that you review the new pushbutton range SIRIUS ACT which is the alternative range proposed by the manufacturer. Please refer to the 3SB3 / SIRIUS ACT cross-reference guide located in the technical reference section.
New items
3TX4490-3J, Siemens
Surge Suppressor Varistors
Surge Suppressor Varistors for plugging onto contactors with or without auxillary contact blocks.
New items
3TX6526-3B, Siemens
Accessories for 3TB, 3TC Contactors
Terminal covers suitable for use with the 3TB and 3TC range of contactors.
New items
5ST2134, Siemens
Series 5ST2 Accessories
Accessories suitable for use with the 5ST2 circuit breakers.
Siemens Distribution Boards & Accessories
Type B characteristic offers instantaneous short circuit response level of 3-5 x normal rated current, making it suitable for circuits with moderate inrush currents such as filament lamps, heating loads and most domestic/small building protection applications.,Type C characteristic offers short circuit response of 5-10 x normal rated current, making it ideal for circuits with higher inrush currents such as motor control and fluorescent lighting installations in industrial buildings where nuisance tripping might occur if a faster type was used.
New items
6ES7241-1CH30-1XB0, Siemens
S7-1200 - Communications Boards
For fast, high-performance serial data exchange via point-to-point connection
Simple parameterization with STEP 7 Basic
Plugged directly into the CPU
Siemens Communication Module
The Siemens communication module for RS485 serial interfacing is a highly efficient device used ideal for fast and efficient serial data exchange. It is used with S7-1200 series PLCs. The device has advanced features like diagnostic indicators that make it an ideal communication module for various industrial applications.
Features and Benefits
Supports message based Freeport
Ambient operating temperature range from -20°C to 60°C
Input current of 50mA drawn from 5V backplane bus
Applications
Industrial automation
Robotics
Automobiles industry
Certifications
IP20 rated
CE mark
RCM approval
FM approval
New items
6GK7243-5DX30-0XE0, Siemens
S7-1200 - Communications Modules PROFIBUS
PROFIBUS DP communication modules for S7-1200
The modules use the PROFIBUS DP-V1 protocol
Configure the modules with SIMATIC STEP 7
Siemens PLC I/O Module
The Siemens communication module enables connection of SIMATIC S7-1200 to PROFIBUS as DP master module. It enables communication with other S7 controllers based on S7 communication provision. It supports all the standard baud rates between 9.6 Kbit/s and 12MBit/s.
Features and Benefits
Input power supply rating is 24VDC
The module uses the PROFIBUS DP-V1 protocol
Up to 8 connections are possible in multi-protocol mode
Up to 3 connections are possible with PG/OP communication
STEP 7 Basic/Professional configuration software are also available
Applications
Industrial automation
Robotics
Automobiles industry
Certifications
IP20 rated
ANSI/ESD S20.20:2014
BSEN 61340-5-1:2007
New items
3RH2131-1BB40, Siemens
Contactor Relays - 3RH2 Range
Climate-proof, finger safe contactor relays. RC elements, varistors, diodes or diode assemblies (combination of a diode and a Zener diode) can be plugged onto all contactor relays for damping opening surges in the coil.
Size S00
High degree if contact stability at low voltages & current
Suitable for use with solid-state circuits with currents ≥ 1 mA at a voltage of ≥ 17 V
Capable of expansion by up to four contacts through use of snap-on auxiliary switch blocks
Note
The OFF-delay of the NO contact and the ON-delay of the NC contact are increased if the contactor coils are attenuated against voltage peaks (noise suppression diode 6 to 10 times; diode assemblies 2 to 6 times, varistor +2 to 5 ms).
Standards
IEC 60947-1, EN 60947-1, IEC 60947-4-1, EN 60947-4-1, IEC 60947-5-1, EN 60947-5-1.
Siemens Sirius Range Contactor & Control Relays
New items
3RH2140-1AF00, Siemens
Contactor Relays - 3RH2 Range
Climate-proof, finger safe contactor relays. RC elements, varistors, diodes or diode assemblies (combination of a diode and a Zener diode) can be plugged onto all contactor relays for damping opening surges in the coil.
Size S00
High degree if contact stability at low voltages & current
Suitable for use with solid-state circuits with currents ≥ 1 mA at a voltage of ≥ 17 V
Capable of expansion by up to four contacts through use of snap-on auxiliary switch blocks
Note
The OFF-delay of the NO contact and the ON-delay of the NC contact are increased if the contactor coils are attenuated against voltage peaks (noise suppression diode 6 to 10 times; diode assemblies 2 to 6 times, varistor +2 to 5 ms).
Standards
IEC 60947-1, EN 60947-1, IEC 60947-4-1, EN 60947-4-1, IEC 60947-5-1, EN 60947-5-1.
Siemens Sirius Range Contactor & Control Relays
New items
3RH2140-1AP00, Siemens
Contactor Relays - 3RH2 Range
Climate-proof, finger safe contactor relays. RC elements, varistors, diodes or diode assemblies (combination of a diode and a Zener diode) can be plugged onto all contactor relays for damping opening surges in the coil.
Size S00
High degree if contact stability at low voltages & current
Suitable for use with solid-state circuits with currents ≥ 1 mA at a voltage of ≥ 17 V
Capable of expansion by up to four contacts through use of snap-on auxiliary switch blocks
Note
The OFF-delay of the NO contact and the ON-delay of the NC contact are increased if the contactor coils are attenuated against voltage peaks (noise suppression diode 6 to 10 times; diode assemblies 2 to 6 times, varistor +2 to 5 ms).
Standards
IEC 60947-1, EN 60947-1, IEC 60947-4-1, EN 60947-4-1, IEC 60947-5-1, EN 60947-5-1.
Siemens Sirius Range Contactor & Control Relays
New items
3RH2362-2BB40, Siemens
Contactor Relays - 3RH2 Range
Climate-proof, finger safe contactor relays. RC elements, varistors, diodes or diode assemblies (combination of a diode and a Zener diode) can be plugged onto all contactor relays for damping opening surges in the coil.
Size S00
High degree if contact stability at low voltages & current
Suitable for use with solid-state circuits with currents ≥ 1 mA at a voltage of ≥ 17 V
Capable of expansion by up to four contacts through use of snap-on auxiliary switch blocks
Note
The OFF-delay of the NO contact and the ON-delay of the NC contact are increased if the contactor coils are attenuated against voltage peaks (noise suppression diode 6 to 10 times; diode assemblies 2 to 6 times, varistor +2 to 5 ms).
Standards
IEC 60947-1, EN 60947-1, IEC 60947-4-1, EN 60947-4-1, IEC 60947-5-1, EN 60947-5-1.
Siemens Sirius Range Contactor & Control Relays
Don’t hesitate to ask questions for better clarification.