Featured Products
C.A 5000 Series Analogue Multimeters Range of analogue multimeters for safe measurement of direct or alternating cu...
C.A 5000 Series Analogue Multimeters Range of analogue multimeters for safe measurement of direct or alternating cu...
An easy-to-use, high-performance instrument, the c.a 6255 micro-ohmmeter tests the quality of connections with precision through the use of low r...
CA8220 Power Analyser The CA8220 is optimised for maintenance and troubleshooting of electrical equipment, electric...
Chauvin Arnoux MiniFLEX MA130 Series Compact Flexible Current Sensors These compact, lightweight and ergonomic sens...
Chauvin Arnoux Voltage and Continuity Tester C.A 745N The C.A 745N voltage and continuity tester can test AC and DC...
MN Series 200A a.c. Mini Clamps Single and dual range mini clamps with nominal current measuring range of 0.5A to 2...
MN Series 200A a.c. Mini Clamps Single and dual range mini clamps with nominal current measuring range of 0.5A to 2...
Chauvin Arnoux CA40 Gauss Meter Designed to measure the electromagnetic radiation levels the CA40 is designed for u...
Chauvin Arnoux Test Probes The removable test probes can be changed to suit the application and the measurement con...
Chauvin Arnoux Test Probes The removable test probes can be changed to suit the application and the measurement con...
Chauvin Arnoux MiniFlex® Current Sensor MA110 Series These compact, lightweight and ergonomic sensors of varying di...
Popular Categories For Chauvin Arnoux
Popular Items
Popular items
P01298033, Chauvin Arnoux
C.A 5000 Series Analogue Multimeters
Range of analogue multimeters for safe measurement of direct or alternating currents.
Shockproof case with a "Multistand" multi-purpose fold-away stand for use at worksites as well as in the lab.
Analogue display with anti-parallax mirror for voltage scales.
The C.A 5005 multimeter is supplied with an MN89 mini-clamp and "Voltest" function to test for voltage on resistance and continuity tests.
Two versions, available in a carry cases with steel hinges for safe storage, protection and transport.
AA alkaline batteries (stock no.:
591-225
) also available separately from the catalogue.
Class:
IEC 61010-1, category III / 600 V (C.A 5001);
IEC 61010-1, category III / 1000 V (C.A 5005)
Popular items
P01298036, Chauvin Arnoux
C.A 5000 Series Analogue Multimeters
Range of analogue multimeters for safe measurement of direct or alternating currents.
Shockproof case with a "Multistand" multi-purpose fold-away stand for use at worksites as well as in the lab.
Analogue display with anti-parallax mirror for voltage scales.
The C.A 5005 multimeter is supplied with an MN89 mini-clamp and "Voltest" function to test for voltage on resistance and continuity tests.
Two versions, available in a carry cases with steel hinges for safe storage, protection and transport.
AA alkaline batteries (stock no.:
591-225
) also available separately from the catalogue.
Class:
IEC 61010-1, category III / 600 V (C.A 5001);
IEC 61010-1, category III / 1000 V (C.A 5005)
Popular items
P01143221, Chauvin Arnoux
An easy-to-use, high-performance instrument, the c.a 6255 micro-ohmmeter tests the quality of connections with precision through the use of low resistance measurements. Featuring a 4-wire measurement method and automatic compensation of stray voltages at input terminals. 3 measurement modes available depending on the application: inductive, non-inductive and non-inductive with automatic trigger temperature compensation function for comparative results.
Optimized current generator on inductive objectsMeasurement up to 2,500 Ω, resolution 0.1 μΩAutomatic compensation of stray voltagesCalculation of R at a reference temperature – Pt100 Ω probeAutomatic discharge after testProgrammable alarmsStorage of up to 1,500 measurementsCommunication with a PC
Popular items
P01160620, Chauvin Arnoux
CA8220 Power Analyser
The CA8220 is optimised for maintenance and troubleshooting of electrical equipment, electrical systems and in single phase and balance three phase systems.,The CA8220 includes measurements for testing and monitoring rotating machines in operation. including temperature, current , duration of in-rush current, resistance of windings and rotation speed.
Large backlit 173-segment LCD display.
Power measurement up to 250kW (dependant on clamp selection)
600V rms and up to 6,500A (with clamps)
Harmonics (IEC 1000-4-7) display up to 50th order
MIN, MAX, AVERAGE, PEAK and Crest Factor display
W, VA, VAR power, DF, THD, CosΦ
Inrush current measurements – Max instantaneous value; Max RMS half-cycle current value and duration of motor start.
RPM rotation speed
Resistance measurement
Simultaneous recording of all parameters, alarms and motor start up currents.
RS232 direct output to PC
2 wire PT100 temperature probe input
Select AC current probes separately :-
Ampflex A193: 10 to 6500Aac (10Hz to 20kHz) 450mm long flexible probe (rs
236-565
)
MN93A: 0.2 to 120Aac (40Hz to 10kHz): Jaw size 20mm dia. (rs
236-559
)
IP54 Rated
Supplied with
Supplied with 6 off AA alkaline batteries, test leads, 4mm test probes, crocodile clips, RS232/USB optical cable and instructions
Popular items
P01120663, Chauvin Arnoux
Chauvin Arnoux MiniFLEX MA130 Series Compact Flexible Current Sensors
These compact, lightweight and ergonomic sensors of varying diameters are capable of clamping all types of conductors, whatever their number, dimensions or shape (bars, etc.). Due to their flexibility, they can be used in any location, however cramped. They are ideal for the requirements in both industry and the tertiary sector. Their quick and easy opening/closing system makes them simple to handle even when wearing safety gloves.
MiniFlex® MA130 sensors are equipped with an automatic standby function which can be deactivated at start-up for long-term measuring campaigns. They can now be powered in 2 ways: either by batteries or by an external power supply (standard μUSB socket). On the control unit, the 3 LEDs (green, yellow and red) indicate, the battery status, the status of the automatic standby function and any measurement capacity overshoots. The single phase versions offer 4 measurement calibres, while the 3 phase versions offer 3.
Comprising 3 flexible sensors which can be connected directly to any multimeter, wattmeter or logger. These flexible coils offer the following major advantages:
Current measurement even in places where access is difficult
Large measurement range
Bandwidth suitable for industrial frequencies and harmonic analysis
No saturation effect, so no overheating
Constant low phase shift appropriate for watt metric measurements
Features and Benefits
Measuring Range: From 0.5 A to 3 kA
3 measuring ranges
Length of the measuring loop (enclosure diameter): 25 cm (Ø7 cm)
Degree of protection loop/housing: IP67...
Popular items
P01191743Z, Chauvin Arnoux
Chauvin Arnoux Voltage and Continuity Tester C.A 745N
The C.A 745N voltage and continuity tester can test AC and DC voltage up to 690 V, with automatic AC or DC detection. It displays the resistance value on 3 thresholds and also offers audible continuity testing. The C.A 745N can be used for single-pole phase testing, there is no risk of tripping high-sensitivity RCDs when performing a phase/earth test.
The tester is equipped with an LCD screen to display the different thresholds in bargraph form. The test probes are removable and easy to replace. There is an integral compartment built into the instrument to store the probes.
Features and Benefits
Compact
Easy to use
Ergonomic design for comfortable handling
Battery status check
Single-pole phase test
AC and DC voltage test (7 thresholds) with automatic AC or DC detection
Resistance (3 thresholds) with audible and visual alarm if a voltage is present
Audible continuity
600 V CAT III
Automatic recognition of AC and DC voltage
Removable test probes
Supplied with
C.A 745N tester, 1 set of black/red extra-fine CAT III / CAT IV test probes, 2 x 1.5 V AAA / LR3 alkaline batteries and 1 user manual in 5 languages
Voltage Level Indicators
A range of voltage testers each available in versions suitable for electronic or electrical applications.
Popular items
P01120415, Chauvin Arnoux
MN Series 200A a.c. Mini Clamps
Single and dual range mini clamps with nominal current measuring range of 0.5A to 200A ac
40Hz to 10kHz bandwidth
MN09, MN11 & MN21
ac current output 1mA ac / 1A ac
for use with multimeters & recorders with a 200mA ac range
MN13, MN39 ac voltage output 10mV ac / 1A ac
for use with multimeters & recorders with 200mV ac range. MN39 has a dual 20A/200A range with 0.1A ac minimum measurement
Conforms to:
IEC1010-2-032 (safety standard) 600V Cat III
MN89 dc voltage output 100m Vdc / 1Aac
for use with multimeters & recorders with mV dc and Vdc inputs, advantageous for multimeters as their mV dc ranges are often more sensitive than their ac current ranges
Ergonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cable
Fitted with a 1.5m flying lead with 4mm shrouded plugs to suit most multimeters
Output voltage limiter prevents high output voltage if clamp output becomes open circuited (MN11 & MN21 only)
Popular items
P01120404, Chauvin Arnoux
MN Series 200A a.c. Mini Clamps
Single and dual range mini clamps with nominal current measuring range of 0.5A to 200A ac
40Hz to 10kHz bandwidth
MN09, MN11 & MN21
ac current output 1mA ac / 1A ac
for use with multimeters & recorders with a 200mA ac range
MN13, MN39 ac voltage output 10mV ac / 1A ac
for use with multimeters & recorders with 200mV ac range. MN39 has a dual 20A/200A range with 0.1A ac minimum measurement
Conforms to:
IEC1010-2-032 (safety standard) 600V Cat III
MN89 dc voltage output 100m Vdc / 1Aac
for use with multimeters & recorders with mV dc and Vdc inputs, advantageous for multimeters as their mV dc ranges are often more sensitive than their ac current ranges
Ergonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cable
Fitted with a 1.5m flying lead with 4mm shrouded plugs to suit most multimeters
Output voltage limiter prevents high output voltage if clamp output becomes open circuited (MN11 & MN21 only)
Popular items
P01167501, Chauvin Arnoux
Chauvin Arnoux CA40 Gauss Meter
Designed to measure the electromagnetic radiation levels the CA40 is designed for use on electrical current lines, home appliances and industrial equipment.
As a high-performance portable device, the design and calibration allow measurement of radiation on a base of 50//60 Hz. The probe is separated from the box for ease of use, making it user friendly and assisting with measurements in hard to reach areas.
Delivered in a hard case with 1 probe, a battery and user manual. (5 language user manual)
Dimensions: 163 X 68 X 24 mm
Features and Benefits:
Battery operated
30 to 300 Hz
Low-frequency magnetic fields measurement
Easy to handle unidirectional probe
285g weight
How Does a Gauss Meter Work?
Guassmeters are a Hall probe, a test current is sent by the meter through the probe. This Hall affect produces a voltage and the meter then records this. Often the highest voltage detected is used or frozen by the meter as voltage fluctuation is common given that magnetic fields are rarely static.
Did you know?
Carl Friederich Gauss born in 1777 developed one of the first devices that could measure direction and strength of a magnetic field. He was a pioneer in this type of study and a great mathematician. He created the system used to measure magnetism and is the reason the modern unit of flux density is named Guass and why we call these units Guass meters.
Standards
IEC 1010-2 and EN 50081-1
Popular items
P01102154Z, Chauvin Arnoux
Chauvin Arnoux Test Probes
The removable test probes can be changed to suit the application and the measurement conditions.
Popular items
P01102153Z, Chauvin Arnoux
Chauvin Arnoux Test Probes
The removable test probes can be changed to suit the application and the measurement conditions.
Popular items
P01120662, Chauvin Arnoux
Chauvin Arnoux MiniFlex® Current Sensor MA110 Series
These compact, lightweight and ergonomic sensors of varying diameters are capable of clamping all types of conductors, whatever their number, dimensions or shape (bars, etc.). Due to their flexibility, they can be used in any location, however cramped. They are ideal for the requirements in both industry and the tertiary sector. Their quick and easy opening/closing system makes them simple to handle even when wearing safety gloves.
MiniFlex® MA110 sensors are equipped with an automatic standby function which can be deactivated at start-up for long-term measuring campaigns. They can now be powered in 2 ways: either by batteries or by an external power supply (standard μUSB socket). On the control unit, the 3 LEDs (green, yellow and red) indicate, the battery status, the status of the automatic standby function and any measurement capacity overshoots. The single phase versions offer 4 measurement calibres, while the 3 phase versions offer 3.
Comprising 3 flexible sensors which can be connected directly to any multimeter, wattmeter or logger. These flexible coils offer the following major advantages:
Current measurement even in places where access is difficult
Large measurement range
Bandwidth suitable for industrial frequencies and harmonic analysis
No saturation effect, so no overheating
Constant low phase shift appropriate for wattmetric measurements
Features and Benefits
Flexible single phase current sensors
Measurements from 80 mA to 3 kA
MA110 sensors are fitted with Ø 4 mm female banana plugs
4 calibres
Sensor length (clamping Ø): 17 cm, 25 cm or 35 cm (Ø4.5 cm, Ø7 cm, Ø10 cm)
Ingress protection of sensor/processing unit: IP67 / IP54
...
New Items
New items
P01298033, Chauvin Arnoux
C.A 5000 Series Analogue Multimeters
Range of analogue multimeters for safe measurement of direct or alternating currents.
Shockproof case with a "Multistand" multi-purpose fold-away stand for use at worksites as well as in the lab.
Analogue display with anti-parallax mirror for voltage scales.
The C.A 5005 multimeter is supplied with an MN89 mini-clamp and "Voltest" function to test for voltage on resistance and continuity tests.
Two versions, available in a carry cases with steel hinges for safe storage, protection and transport.
AA alkaline batteries (stock no.:
591-225
) also available separately from the catalogue.
Class:
IEC 61010-1, category III / 600 V (C.A 5001);
IEC 61010-1, category III / 1000 V (C.A 5005)
New items
P01298036, Chauvin Arnoux
C.A 5000 Series Analogue Multimeters
Range of analogue multimeters for safe measurement of direct or alternating currents.
Shockproof case with a "Multistand" multi-purpose fold-away stand for use at worksites as well as in the lab.
Analogue display with anti-parallax mirror for voltage scales.
The C.A 5005 multimeter is supplied with an MN89 mini-clamp and "Voltest" function to test for voltage on resistance and continuity tests.
Two versions, available in a carry cases with steel hinges for safe storage, protection and transport.
AA alkaline batteries (stock no.:
591-225
) also available separately from the catalogue.
Class:
IEC 61010-1, category III / 600 V (C.A 5001);
IEC 61010-1, category III / 1000 V (C.A 5005)
New items
P01143221, Chauvin Arnoux
An easy-to-use, high-performance instrument, the c.a 6255 micro-ohmmeter tests the quality of connections with precision through the use of low resistance measurements. Featuring a 4-wire measurement method and automatic compensation of stray voltages at input terminals. 3 measurement modes available depending on the application: inductive, non-inductive and non-inductive with automatic trigger temperature compensation function for comparative results.
Optimized current generator on inductive objectsMeasurement up to 2,500 Ω, resolution 0.1 μΩAutomatic compensation of stray voltagesCalculation of R at a reference temperature – Pt100 Ω probeAutomatic discharge after testProgrammable alarmsStorage of up to 1,500 measurementsCommunication with a PC
New items
P01160620, Chauvin Arnoux
CA8220 Power Analyser
The CA8220 is optimised for maintenance and troubleshooting of electrical equipment, electrical systems and in single phase and balance three phase systems.,The CA8220 includes measurements for testing and monitoring rotating machines in operation. including temperature, current , duration of in-rush current, resistance of windings and rotation speed.
Large backlit 173-segment LCD display.
Power measurement up to 250kW (dependant on clamp selection)
600V rms and up to 6,500A (with clamps)
Harmonics (IEC 1000-4-7) display up to 50th order
MIN, MAX, AVERAGE, PEAK and Crest Factor display
W, VA, VAR power, DF, THD, CosΦ
Inrush current measurements – Max instantaneous value; Max RMS half-cycle current value and duration of motor start.
RPM rotation speed
Resistance measurement
Simultaneous recording of all parameters, alarms and motor start up currents.
RS232 direct output to PC
2 wire PT100 temperature probe input
Select AC current probes separately :-
Ampflex A193: 10 to 6500Aac (10Hz to 20kHz) 450mm long flexible probe (rs
236-565
)
MN93A: 0.2 to 120Aac (40Hz to 10kHz): Jaw size 20mm dia. (rs
236-559
)
IP54 Rated
Supplied with
Supplied with 6 off AA alkaline batteries, test leads, 4mm test probes, crocodile clips, RS232/USB optical cable and instructions
New items
P01120663, Chauvin Arnoux
Chauvin Arnoux MiniFLEX MA130 Series Compact Flexible Current Sensors
These compact, lightweight and ergonomic sensors of varying diameters are capable of clamping all types of conductors, whatever their number, dimensions or shape (bars, etc.). Due to their flexibility, they can be used in any location, however cramped. They are ideal for the requirements in both industry and the tertiary sector. Their quick and easy opening/closing system makes them simple to handle even when wearing safety gloves.
MiniFlex® MA130 sensors are equipped with an automatic standby function which can be deactivated at start-up for long-term measuring campaigns. They can now be powered in 2 ways: either by batteries or by an external power supply (standard μUSB socket). On the control unit, the 3 LEDs (green, yellow and red) indicate, the battery status, the status of the automatic standby function and any measurement capacity overshoots. The single phase versions offer 4 measurement calibres, while the 3 phase versions offer 3.
Comprising 3 flexible sensors which can be connected directly to any multimeter, wattmeter or logger. These flexible coils offer the following major advantages:
Current measurement even in places where access is difficult
Large measurement range
Bandwidth suitable for industrial frequencies and harmonic analysis
No saturation effect, so no overheating
Constant low phase shift appropriate for watt metric measurements
Features and Benefits
Measuring Range: From 0.5 A to 3 kA
3 measuring ranges
Length of the measuring loop (enclosure diameter): 25 cm (Ø7 cm)
Degree of protection loop/housing: IP67...
New items
P01191743Z, Chauvin Arnoux
Chauvin Arnoux Voltage and Continuity Tester C.A 745N
The C.A 745N voltage and continuity tester can test AC and DC voltage up to 690 V, with automatic AC or DC detection. It displays the resistance value on 3 thresholds and also offers audible continuity testing. The C.A 745N can be used for single-pole phase testing, there is no risk of tripping high-sensitivity RCDs when performing a phase/earth test.
The tester is equipped with an LCD screen to display the different thresholds in bargraph form. The test probes are removable and easy to replace. There is an integral compartment built into the instrument to store the probes.
Features and Benefits
Compact
Easy to use
Ergonomic design for comfortable handling
Battery status check
Single-pole phase test
AC and DC voltage test (7 thresholds) with automatic AC or DC detection
Resistance (3 thresholds) with audible and visual alarm if a voltage is present
Audible continuity
600 V CAT III
Automatic recognition of AC and DC voltage
Removable test probes
Supplied with
C.A 745N tester, 1 set of black/red extra-fine CAT III / CAT IV test probes, 2 x 1.5 V AAA / LR3 alkaline batteries and 1 user manual in 5 languages
Voltage Level Indicators
A range of voltage testers each available in versions suitable for electronic or electrical applications.
New items
P01120415, Chauvin Arnoux
MN Series 200A a.c. Mini Clamps
Single and dual range mini clamps with nominal current measuring range of 0.5A to 200A ac
40Hz to 10kHz bandwidth
MN09, MN11 & MN21
ac current output 1mA ac / 1A ac
for use with multimeters & recorders with a 200mA ac range
MN13, MN39 ac voltage output 10mV ac / 1A ac
for use with multimeters & recorders with 200mV ac range. MN39 has a dual 20A/200A range with 0.1A ac minimum measurement
Conforms to:
IEC1010-2-032 (safety standard) 600V Cat III
MN89 dc voltage output 100m Vdc / 1Aac
for use with multimeters & recorders with mV dc and Vdc inputs, advantageous for multimeters as their mV dc ranges are often more sensitive than their ac current ranges
Ergonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cable
Fitted with a 1.5m flying lead with 4mm shrouded plugs to suit most multimeters
Output voltage limiter prevents high output voltage if clamp output becomes open circuited (MN11 & MN21 only)
New items
P01120404, Chauvin Arnoux
MN Series 200A a.c. Mini Clamps
Single and dual range mini clamps with nominal current measuring range of 0.5A to 200A ac
40Hz to 10kHz bandwidth
MN09, MN11 & MN21
ac current output 1mA ac / 1A ac
for use with multimeters & recorders with a 200mA ac range
MN13, MN39 ac voltage output 10mV ac / 1A ac
for use with multimeters & recorders with 200mV ac range. MN39 has a dual 20A/200A range with 0.1A ac minimum measurement
Conforms to:
IEC1010-2-032 (safety standard) 600V Cat III
MN89 dc voltage output 100m Vdc / 1Aac
for use with multimeters & recorders with mV dc and Vdc inputs, advantageous for multimeters as their mV dc ranges are often more sensitive than their ac current ranges
Ergonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cable
Fitted with a 1.5m flying lead with 4mm shrouded plugs to suit most multimeters
Output voltage limiter prevents high output voltage if clamp output becomes open circuited (MN11 & MN21 only)
New items
P01167501, Chauvin Arnoux
Chauvin Arnoux CA40 Gauss Meter
Designed to measure the electromagnetic radiation levels the CA40 is designed for use on electrical current lines, home appliances and industrial equipment.
As a high-performance portable device, the design and calibration allow measurement of radiation on a base of 50//60 Hz. The probe is separated from the box for ease of use, making it user friendly and assisting with measurements in hard to reach areas.
Delivered in a hard case with 1 probe, a battery and user manual. (5 language user manual)
Dimensions: 163 X 68 X 24 mm
Features and Benefits:
Battery operated
30 to 300 Hz
Low-frequency magnetic fields measurement
Easy to handle unidirectional probe
285g weight
How Does a Gauss Meter Work?
Guassmeters are a Hall probe, a test current is sent by the meter through the probe. This Hall affect produces a voltage and the meter then records this. Often the highest voltage detected is used or frozen by the meter as voltage fluctuation is common given that magnetic fields are rarely static.
Did you know?
Carl Friederich Gauss born in 1777 developed one of the first devices that could measure direction and strength of a magnetic field. He was a pioneer in this type of study and a great mathematician. He created the system used to measure magnetism and is the reason the modern unit of flux density is named Guass and why we call these units Guass meters.
Standards
IEC 1010-2 and EN 50081-1
New items
P01102154Z, Chauvin Arnoux
Chauvin Arnoux Test Probes
The removable test probes can be changed to suit the application and the measurement conditions.
New items
P01102153Z, Chauvin Arnoux
Chauvin Arnoux Test Probes
The removable test probes can be changed to suit the application and the measurement conditions.
New items
P01120662, Chauvin Arnoux
Chauvin Arnoux MiniFlex® Current Sensor MA110 Series
These compact, lightweight and ergonomic sensors of varying diameters are capable of clamping all types of conductors, whatever their number, dimensions or shape (bars, etc.). Due to their flexibility, they can be used in any location, however cramped. They are ideal for the requirements in both industry and the tertiary sector. Their quick and easy opening/closing system makes them simple to handle even when wearing safety gloves.
MiniFlex® MA110 sensors are equipped with an automatic standby function which can be deactivated at start-up for long-term measuring campaigns. They can now be powered in 2 ways: either by batteries or by an external power supply (standard μUSB socket). On the control unit, the 3 LEDs (green, yellow and red) indicate, the battery status, the status of the automatic standby function and any measurement capacity overshoots. The single phase versions offer 4 measurement calibres, while the 3 phase versions offer 3.
Comprising 3 flexible sensors which can be connected directly to any multimeter, wattmeter or logger. These flexible coils offer the following major advantages:
Current measurement even in places where access is difficult
Large measurement range
Bandwidth suitable for industrial frequencies and harmonic analysis
No saturation effect, so no overheating
Constant low phase shift appropriate for wattmetric measurements
Features and Benefits
Flexible single phase current sensors
Measurements from 80 mA to 3 kA
MA110 sensors are fitted with Ø 4 mm female banana plugs
4 calibres
Sensor length (clamping Ø): 17 cm, 25 cm or 35 cm (Ø4.5 cm, Ø7 cm, Ø10 cm)
Ingress protection of sensor/processing unit: IP67 / IP54
...
Don’t hesitate to ask questions for better clarification.