Featured Products
15 Degree Steel Aluminium Sloped Console Two part construction suitable for housing electrical/electronic modules a...
15 Degree Steel Aluminium Sloped Console Two part construction suitable for housing electrical/electronic modules a...
BeagleBone and BeagleBoard Enclosures These enclosures are machined to accept the popular beagle board and beaglebo...
Hammond 1455 Enclosure with Plastic End Panels The Hammond 1455 series enclosure has an extruded aluminium body and...
BeagleBone and BeagleBoard Enclosures These enclosures are machined to accept the popular beagle board and beaglebo...
Enclosure Mounting Kit Nylon mounting kits for mounting standard ABS enclosures to any surface Note...
BeagleBone and BeagleBoard Enclosures These enclosures are machined to accept the popular beagle board and beaglebo...
BeagleBone and BeagleBoard Enclosures These enclosures are machined to accept the popular beagle board and beaglebo...
Hammond 1411 & 1412 Series General Purpose Enclosure Premium aluminium and steel general purpose enclosures offered...
Hammond 1416 Mild Steel Component Case The 1416 series component cases have been designed to provide mechanical pro...
Hammond 1455 Enclosure with Plastic End Panels The Hammond 1455 series enclosure has an extruded aluminium body and...
Hammond 1455 Enclosure with Plastic End Panels The Hammond 1455 series enclosure has an extruded aluminium body and...
Popular Categories For Hammond
Popular Items
Popular items
500-0940, Hammond
15 Degree Steel Aluminium Sloped Console
Two part construction suitable for housing electrical/electronic modules and power supplies
Secured by 4 self tapping screws
Ventilation slots on either side
Mild steel body with aluminium panel
Body colour dark grey, panel light grey
Supplied with
self-adhesive rubber feet
Popular items
500-0930, Hammond
15 Degree Steel Aluminium Sloped Console
Two part construction suitable for housing electrical/electronic modules and power supplies
Secured by 4 self tapping screws
Ventilation slots on either side
Mild steel body with aluminium panel
Body colour dark grey, panel light grey
Supplied with
self-adhesive rubber feet
Popular items
1593HAMDOGTBU, Hammond
BeagleBone and BeagleBoard Enclosures
These enclosures are machined to accept the popular beagle board and beaglebone black development boards. They are moulded in a choice of black, grey or translucent blue general purpose ABS plastic with a satin textured finish. The enclosure is machined to allow access to I/O connectors and often used controls and/or LEDS. The black & translucent blue plastic enclosures include black self tapping screws and the grey plastic enclosure includes nickel finished self tapping screws. Also included are four (4) self adhesive rubber feet and an instruction sheet.
Note
Development boards are NOT included.
Popular items
1455N1602, Hammond
Hammond 1455 Enclosure with Plastic End Panels
The Hammond 1455 series enclosure has an extruded aluminium body and two easy to machine, black solid ABS end panels with integral bezel. These enclosures are designed to house P.C. boards or for equipment interfacing.
Features and Benefits
Designed to house P.C. boards or for equipment interfacing
Sized for standard Eurocards
PCBs mount horizontally by sliding into internal slots extruded into the enclosure body
Enclosure includes two solid black plastic end panels with integral bezel
Rugged body constructed from extruded aluminium with a minimum thickness of 1.5 mm
Extruded body includes a slide removable belly plate, except in smaller sizes (A, B, C & D)
Smaller sizes (A & B) are rounded for better hand held ergonomics
DIN Rail clips & flange kits are available separately
FAQ:
Can these enclosures be used outdoor?
No, these enclosures cannot be used outdoors as they do not meet any IP rating standard. They have been designed for strictly indoor use.
What is supplied?
1 x extruded aluminium body,
2 x ABS end panels,
6 x end panel screws
Self-adhesive rubber feet.
Popular items
1593HAMBONEGY, Hammond
BeagleBone and BeagleBoard Enclosures
These enclosures are machined to accept the popular beagle board and beaglebone black development boards. They are moulded in a choice of black, grey or translucent blue general purpose ABS plastic with a satin textured finish. The enclosure is machined to allow access to I/O connectors and often used controls and/or LEDS. The black & translucent blue plastic enclosures include black self tapping screws and the grey plastic enclosure includes nickel finished self tapping screws. Also included are four (4) self adhesive rubber feet and an instruction sheet.
Note
Development boards are NOT included.
Popular items
1591F1BK-2, Hammond
Enclosure Mounting Kit
Nylon mounting kits for mounting standard ABS enclosures to any surface
Note
The mounting kit comprises of two end flanges, it does not include screws, please use screws from enclosure.
Popular items
1593HAMDOGBK, Hammond
BeagleBone and BeagleBoard Enclosures
These enclosures are machined to accept the popular beagle board and beaglebone black development boards. They are moulded in a choice of black, grey or translucent blue general purpose ABS plastic with a satin textured finish. The enclosure is machined to allow access to I/O connectors and often used controls and/or LEDS. The black & translucent blue plastic enclosures include black self tapping screws and the grey plastic enclosure includes nickel finished self tapping screws. Also included are four (4) self adhesive rubber feet and an instruction sheet.
Note
Development boards are NOT included.
Popular items
1593HAMBONEBK, Hammond
BeagleBone and BeagleBoard Enclosures
These enclosures are machined to accept the popular beagle board and beaglebone black development boards. They are moulded in a choice of black, grey or translucent blue general purpose ABS plastic with a satin textured finish. The enclosure is machined to allow access to I/O connectors and often used controls and/or LEDS. The black & translucent blue plastic enclosures include black self tapping screws and the grey plastic enclosure includes nickel finished self tapping screws. Also included are four (4) self adhesive rubber feet and an instruction sheet.
Note
Development boards are NOT included.
Popular items
1402B, Hammond
Hammond 1411 & 1412 Series General Purpose Enclosure
Premium aluminium and steel general purpose enclosures offered by Hammond provide the user with a durable product which is suitable for a wide variety of applications
1411 series offers a 1.02 mm thick enclosure wall
1412 series offers a more robust 20 gauge wall
Self-tapping screws are included
Available in a natural or black finish
Can be used in a wide variety of applications
Various mounting options available to ensure your application is covered
Popular items
1416I, Hammond
Hammond 1416 Mild Steel Component Case
The 1416 series component cases have been designed to provide mechanical protection to equipment and components that require ventilation. They are ideally suited for applications where heat dissipation is required.
Features:
Base is formed from 16 gauge steel with two conduit knockouts located in each end
Four raised dimples with mounting holes are provided on the base
Cover is formed from 18 gauge steel with 0.235 x 1.5 inch ventilating slots (0.199 x 1.12 inch on E & G only)
Screw holes and offsets in the cover allow easy assembly
Standards
Complies with NEMA Type 1
Popular items
1455K1602, Hammond
Hammond 1455 Enclosure with Plastic End Panels
The Hammond 1455 series enclosure has an extruded aluminium body and two easy to machine, black solid ABS end panels with integral bezel. These enclosures are designed to house P.C. boards or for equipment interfacing.
Features and Benefits
Designed to house P.C. boards or for equipment interfacing
Sized for standard Eurocards
PCBs mount horizontally by sliding into internal slots extruded into the enclosure body
Enclosure includes two solid black plastic end panels with integral bezel
Rugged body constructed from extruded aluminium with a minimum thickness of 1.5 mm
Extruded body includes a slide removable belly plate, except in smaller sizes (A, B, C & D)
Smaller sizes (A & B) are rounded for better hand held ergonomics
DIN Rail clips & flange kits are available separately
FAQ:
Can these enclosures be used outdoor?
No, these enclosures cannot be used outdoors as they do not meet any IP rating standard. They have been designed for strictly indoor use.
What is supplied?
1 x extruded aluminium body,
2 x ABS end panels,
6 x end panel screws
Self-adhesive rubber feet.
Popular items
1455K1202, Hammond
Hammond 1455 Enclosure with Plastic End Panels
The Hammond 1455 series enclosure has an extruded aluminium body and two easy to machine, black solid ABS end panels with integral bezel. These enclosures are designed to house P.C. boards or for equipment interfacing.
Features and Benefits
Designed to house P.C. boards or for equipment interfacing
Sized for standard Eurocards
PCBs mount horizontally by sliding into internal slots extruded into the enclosure body
Enclosure includes two solid black plastic end panels with integral bezel
Rugged body constructed from extruded aluminium with a minimum thickness of 1.5 mm
Extruded body includes a slide removable belly plate, except in smaller sizes (A, B, C & D)
Smaller sizes (A & B) are rounded for better hand held ergonomics
DIN Rail clips & flange kits are available separately
FAQ:
Can these enclosures be used outdoor?
No, these enclosures cannot be used outdoors as they do not meet any IP rating standard. They have been designed for strictly indoor use.
What is supplied?
1 x extruded aluminium body,
2 x ABS end panels,
6 x end panel screws
Self-adhesive rubber feet.
New Items
New items
500-0940, Hammond
15 Degree Steel Aluminium Sloped Console
Two part construction suitable for housing electrical/electronic modules and power supplies
Secured by 4 self tapping screws
Ventilation slots on either side
Mild steel body with aluminium panel
Body colour dark grey, panel light grey
Supplied with
self-adhesive rubber feet
New items
500-0930, Hammond
15 Degree Steel Aluminium Sloped Console
Two part construction suitable for housing electrical/electronic modules and power supplies
Secured by 4 self tapping screws
Ventilation slots on either side
Mild steel body with aluminium panel
Body colour dark grey, panel light grey
Supplied with
self-adhesive rubber feet
New items
1593HAMDOGTBU, Hammond
BeagleBone and BeagleBoard Enclosures
These enclosures are machined to accept the popular beagle board and beaglebone black development boards. They are moulded in a choice of black, grey or translucent blue general purpose ABS plastic with a satin textured finish. The enclosure is machined to allow access to I/O connectors and often used controls and/or LEDS. The black & translucent blue plastic enclosures include black self tapping screws and the grey plastic enclosure includes nickel finished self tapping screws. Also included are four (4) self adhesive rubber feet and an instruction sheet.
Note
Development boards are NOT included.
New items
1455N1602, Hammond
Hammond 1455 Enclosure with Plastic End Panels
The Hammond 1455 series enclosure has an extruded aluminium body and two easy to machine, black solid ABS end panels with integral bezel. These enclosures are designed to house P.C. boards or for equipment interfacing.
Features and Benefits
Designed to house P.C. boards or for equipment interfacing
Sized for standard Eurocards
PCBs mount horizontally by sliding into internal slots extruded into the enclosure body
Enclosure includes two solid black plastic end panels with integral bezel
Rugged body constructed from extruded aluminium with a minimum thickness of 1.5 mm
Extruded body includes a slide removable belly plate, except in smaller sizes (A, B, C & D)
Smaller sizes (A & B) are rounded for better hand held ergonomics
DIN Rail clips & flange kits are available separately
FAQ:
Can these enclosures be used outdoor?
No, these enclosures cannot be used outdoors as they do not meet any IP rating standard. They have been designed for strictly indoor use.
What is supplied?
1 x extruded aluminium body,
2 x ABS end panels,
6 x end panel screws
Self-adhesive rubber feet.
New items
1593HAMBONEGY, Hammond
BeagleBone and BeagleBoard Enclosures
These enclosures are machined to accept the popular beagle board and beaglebone black development boards. They are moulded in a choice of black, grey or translucent blue general purpose ABS plastic with a satin textured finish. The enclosure is machined to allow access to I/O connectors and often used controls and/or LEDS. The black & translucent blue plastic enclosures include black self tapping screws and the grey plastic enclosure includes nickel finished self tapping screws. Also included are four (4) self adhesive rubber feet and an instruction sheet.
Note
Development boards are NOT included.
New items
1591F1BK-2, Hammond
Enclosure Mounting Kit
Nylon mounting kits for mounting standard ABS enclosures to any surface
Note
The mounting kit comprises of two end flanges, it does not include screws, please use screws from enclosure.
New items
1593HAMDOGBK, Hammond
BeagleBone and BeagleBoard Enclosures
These enclosures are machined to accept the popular beagle board and beaglebone black development boards. They are moulded in a choice of black, grey or translucent blue general purpose ABS plastic with a satin textured finish. The enclosure is machined to allow access to I/O connectors and often used controls and/or LEDS. The black & translucent blue plastic enclosures include black self tapping screws and the grey plastic enclosure includes nickel finished self tapping screws. Also included are four (4) self adhesive rubber feet and an instruction sheet.
Note
Development boards are NOT included.
New items
1593HAMBONEBK, Hammond
BeagleBone and BeagleBoard Enclosures
These enclosures are machined to accept the popular beagle board and beaglebone black development boards. They are moulded in a choice of black, grey or translucent blue general purpose ABS plastic with a satin textured finish. The enclosure is machined to allow access to I/O connectors and often used controls and/or LEDS. The black & translucent blue plastic enclosures include black self tapping screws and the grey plastic enclosure includes nickel finished self tapping screws. Also included are four (4) self adhesive rubber feet and an instruction sheet.
Note
Development boards are NOT included.
New items
1402B, Hammond
Hammond 1411 & 1412 Series General Purpose Enclosure
Premium aluminium and steel general purpose enclosures offered by Hammond provide the user with a durable product which is suitable for a wide variety of applications
1411 series offers a 1.02 mm thick enclosure wall
1412 series offers a more robust 20 gauge wall
Self-tapping screws are included
Available in a natural or black finish
Can be used in a wide variety of applications
Various mounting options available to ensure your application is covered
New items
1416I, Hammond
Hammond 1416 Mild Steel Component Case
The 1416 series component cases have been designed to provide mechanical protection to equipment and components that require ventilation. They are ideally suited for applications where heat dissipation is required.
Features:
Base is formed from 16 gauge steel with two conduit knockouts located in each end
Four raised dimples with mounting holes are provided on the base
Cover is formed from 18 gauge steel with 0.235 x 1.5 inch ventilating slots (0.199 x 1.12 inch on E & G only)
Screw holes and offsets in the cover allow easy assembly
Standards
Complies with NEMA Type 1
New items
1455K1602, Hammond
Hammond 1455 Enclosure with Plastic End Panels
The Hammond 1455 series enclosure has an extruded aluminium body and two easy to machine, black solid ABS end panels with integral bezel. These enclosures are designed to house P.C. boards or for equipment interfacing.
Features and Benefits
Designed to house P.C. boards or for equipment interfacing
Sized for standard Eurocards
PCBs mount horizontally by sliding into internal slots extruded into the enclosure body
Enclosure includes two solid black plastic end panels with integral bezel
Rugged body constructed from extruded aluminium with a minimum thickness of 1.5 mm
Extruded body includes a slide removable belly plate, except in smaller sizes (A, B, C & D)
Smaller sizes (A & B) are rounded for better hand held ergonomics
DIN Rail clips & flange kits are available separately
FAQ:
Can these enclosures be used outdoor?
No, these enclosures cannot be used outdoors as they do not meet any IP rating standard. They have been designed for strictly indoor use.
What is supplied?
1 x extruded aluminium body,
2 x ABS end panels,
6 x end panel screws
Self-adhesive rubber feet.
New items
1455K1202, Hammond
Hammond 1455 Enclosure with Plastic End Panels
The Hammond 1455 series enclosure has an extruded aluminium body and two easy to machine, black solid ABS end panels with integral bezel. These enclosures are designed to house P.C. boards or for equipment interfacing.
Features and Benefits
Designed to house P.C. boards or for equipment interfacing
Sized for standard Eurocards
PCBs mount horizontally by sliding into internal slots extruded into the enclosure body
Enclosure includes two solid black plastic end panels with integral bezel
Rugged body constructed from extruded aluminium with a minimum thickness of 1.5 mm
Extruded body includes a slide removable belly plate, except in smaller sizes (A, B, C & D)
Smaller sizes (A & B) are rounded for better hand held ergonomics
DIN Rail clips & flange kits are available separately
FAQ:
Can these enclosures be used outdoor?
No, these enclosures cannot be used outdoors as they do not meet any IP rating standard. They have been designed for strictly indoor use.
What is supplied?
1 x extruded aluminium body,
2 x ABS end panels,
6 x end panel screws
Self-adhesive rubber feet.
Don’t hesitate to ask questions for better clarification.