Featured Products
±60V Isolated Data Interface +5V Single Supply Low-Cost Replacement for Opto-Isolated Transceivers True Fail-Safe Receiver Pin-Selectable Full/Ha...
The MAX8860 low-noise, low-dropout linear regulator operates from a +2.5V to +6.5V input and is guaranteed to deliver 300mA. Typical output noise...
Maxim's MAX312/MAX313/MAX314 analog switches feature low on-resistance (10Ω max) and 1.5Ω on-resistance matching between channels. These switches...
The MAX8215 contains five voltage comparators, four are for monitoring +5V, -5V, +12V, and -12V, and the fifth monitors any desired voltage. The...
ESD Protection: ±10kV—Human Body Model Single +5V Operation Guaranteed Device-to-Device Skew (MAX3040/MAX3041/MAX3043/MAX3044) Pin-Compatible wit...
25ns Propagation Delay350μA (1.75mW) Supply Current Per ComparatorSingle 4.5V to 5.5V Supply OperationWide Input Range Includes GroundLow 500μV O...
The DS1803 addressable dual digital potentiometer features two independently controlled 256-position potentiometers. Device control is achieved t...
Dual, Audio Log Taper PotentiometersLow THD+N and Crosstalk5V Analog Supply (Independent of Digital Supply)3V to 5V Digital Supply RangePotentiom...
For Space-Constrained Applications: MAX3228E/MAX3229E: ±15kV ESD-Protected, +2.5V to +5.5V Transceivers MAX3222E/MAX3232E/MAX3237E/MAX3241E/MAX32...
For Fault-Tolerant Applications: MAX3430: ±80V Fault-Protected, Fail-Safe, 1/4- Unit Load, +3.3V Transceiver For Low-Voltage Applications: MAX336...
Popular Categories For Maxim Integrated
Popular Items
Popular items
MAX3158CAI+, Maxim Integrated
±60V Isolated Data Interface
+5V Single Supply
Low-Cost Replacement for Opto-Isolated Transceivers
True Fail-Safe Receiver
Pin-Selectable Full/Half-Duplex Operation
Phase Controls to Correct for Twisted-Pair Reversal
25μA Low-Power Shutdown Mode
Thermal Shutdown for Driver Overload Protection
28-Pin SSOP Package
Slew-Rate-Limited Reduced EMI
Applications
Industrial Controls
Level Translators
Local Area Networks (LANs)
Telecommunications
Related Resources
Related Packaging
Popular items
MAX8860EUA18+, Maxim Integrated
The MAX8860 low-noise, low-dropout linear regulator operates from a +2.5V to +6.5V input and is guaranteed to deliver 300mA. Typical output noise for this device is 60μVRMS, and typical dropout is 105mV at 200mA. In addition to the six available preset output voltages (+1.8V, +2.5V, +2.77V, +2.82V, +3V, and +3.3V), the Dual Mode™ feature allows the device to be configured as an adjustable output regulator from +1.25V to +6.5V.
Designed with an internal P-channel MOSFET pass transistor, the MAX8860 has a low 120μA supply current. An output fault-detection circuit indicates loss of regulation. Other features include a 10nA, logic-controlled shutdown mode, short-circuit and thermal-shutdown protection, and reverse battery protection. The MAX8860 is available in a miniature 8-pin μMAX® package.
High Output Current (300mA)
Low Output Voltage Noise: 60μVRMS
Low 105mV Dropout at 200mA Output
Low 120μA No-Load Supply Current
Thermal-Overload and Short-Circuit Protection
Reverse Battery Protection
10nA Logic-Controlled Shutdown
Active-low FAULT Indicator
Small, Space-Saving μMAX Package (1.1mm max height)
Small 2.2μF Output Capacitor Saves Space and Cost
Applications
DSP Core Power
Electronic Planners
Handheld Instruments (PDAs, Palmtops)
Palmtop Computers
PCMCIA Cards
Wireless Handsets
Popular items
MAX312ESE+, Maxim Integrated
Maxim's MAX312/MAX313/MAX314 analog switches feature low on-resistance (10Ω max) and 1.5Ω on-resistance matching between channels. These switches conduct equally well in either direction. They offer low leakage over temperature (2.5nA at +85°C). Low power consumption and ESD tolerance greater than 2000V.The MAX312/MAX313/MAX314 are quad, single-pole/single-throw (SPST) analog switches. The MAX312 is normally closed (NC), and the MAX313 is normally open (NO). The MAX314 has two NC switches and two NO switches. All three devices operate from a single supply of +4.5V to +30V or from dual supplies of ±4.5V to ±20V.
Pin Compatible with DG411/DG412/DG413Low On-Resistance (6.5Ω typical)Guaranteed RON Match Between Channels (1.5Ω max)Guaranteed RON Flatness over Specified Signal Range (2Ω max)Guaranteed ESD Protection > 2000V Crosstalk > 96dB at 20kHzSingle-Supply Operation: +4.5V to +30V Dual-Supply Operation: ±4.5V to ±20VRail-to-Rail Signal Handling ApplicationsAudio-Signal RoutingAvionicsCommunication SystemsData AcquisitionPBX/PABX SystemsSample-and-Hold CircuitsTest Equipment
Popular items
MAX8216CSD+, Maxim Integrated
The MAX8215 contains five voltage comparators, four are for monitoring +5V, -5V, +12V, and -12V, and the fifth monitors any desired voltage. The MAX8216 is identical, except it monitors ±15V supplies instead of ±12V. The resistors required to monitor these voltages and provide comparator hysteresis are included on-chip. All comparators have open-drain outputs. These devices consume 250μA max supply current over temperature.
4 Dedicated Comparators plus 1 Auxiliary Comparator
5V Dedicated Comparator Has ±1.25% Accuracy
-5V, +12V, -12V, +15V, -15V Dedicated Comparators Have ±1.5% Accuracy
Overvoltage/Undervoltage Detection or Programmable Delay Using Auxiliary Comparator
Internal 1.24V Reference with ±1% Initial Accuracy
Wide Supply Range: 2.7V to 11V
Built-In Hysteresis
250μA Max Supply Current Over Temp.
Independent Open-Drain Outputs
All Precision Components Included
Applications
Data Acquisition Systems
Industrial Controllers
Industrial Equipment
Microprocessor Voltage Monitor: +5V, -5V, +12V, -12V Supply Monitoring (MAX8215), +5V, -5V, +15V, -15V Supply Monitoring (MAX8216)
Mobile Radios
Overvoltage/Undervoltage Detection with Uncommitted Comparator
Portable Instruments
Popular items
MAX3042BCUE+, Maxim Integrated
ESD Protection: ±10kV—Human Body Model
Single +5V Operation
Guaranteed Device-to-Device Skew (MAX3040/MAX3041/MAX3043/MAX3044)
Pin-Compatible with 'SN75174, '26LS31C and LTC487
Hot-Swappable for Telecom Applications
Up to 20Mbps Data Rate (MAX3042B/MAX3045B)
Slew-Rate Limited (Data Rates at 2.5Mbps and 250kbps)
2nA Low-Power Shutdown Mode
1mA Operating Supply Current
±2kV EFT Fast Transient Burst Immunity
Level 2 Surge Immunity, Unshielded Cable Model
Ultra-Small 16-Pin TSSOP, 16-Pin Narrow SO, and Wide 16-Pin SO
Applications
Handheld Equipment
Industrial Motor Control
Industrial PLCs
Networking
Telecommunications Equipment
Transmitter for ESD-Sensitive Applications
Popular items
MAX9107ESA+, Maxim Integrated
25ns Propagation Delay350μA (1.75mW) Supply Current Per ComparatorSingle 4.5V to 5.5V Supply OperationWide Input Range Includes GroundLow 500μV Offset VoltageInternal Hysteresis Provides Clean Switching (2mV)TTL-Compatible OutputsInternal Latch (MAX9109 only)Space-Saving Packages:6-Pin SC70 (MAX9109)8-Pin SOT23 (MAX9107)14-Pin TSSOP (MAX9108) ApplicationsA/D ConvertersBattery-Powered ApplicationsLine ReceiversSampling CircuitsThreshold Detectors/DiscriminatorsZero-Crossing Detectors
Popular items
DS1803Z-050+, Maxim Integrated
The DS1803 addressable dual digital potentiometer features two independently controlled 256-position potentiometers. Device control is achieved through a 2-wire serial interface. Three address pins allow up to 8 DS1803's to share the same 2-wire interface. The exact wiper position of each potentiometer can be written or read. The DS1803 is available in a 16-pin DIP, 16-pin SO, and 14-pin TSSOP package. The device is available in three standard resistance values: 10kΩ, 50kΩ, and 100kΩ and is specified over the industrial temperature range.
3V or 5V OperationUltra-Low Power ConsumptionTwo Digitally Controlled, 256- Potentiometers14-Pin TSSOP (173 mil) and 16- mil) Packaging Available for Surface- ApplicationsAddressable Using 3 Address2-Wire Serial InterfaceOperating Temperature Range:Industrial: -40°C to +85°C Standard Resistance Values:\x02DS1803-010 10kΩDS1803-050 50kΩDS1803-100 100kΩ
Popular items
DS1881Z-050+, Maxim Integrated
Dual, Audio Log Taper PotentiometersLow THD+N and Crosstalk5V Analog Supply (Independent of Digital Supply)3V to 5V Digital Supply RangePotentiometer Settings Configurable as NV or VolatileZero-Crossing Detector Eliminates Switching NoiseTwo User-Configurable Attenuation OptionsConfiguration Option 1: 63 Positions Provide 1dB Attenuation Steps from 0dB to -62dB Plus MuteConfiguration Option 2: (Software-Compatible with the DS1808): 33 Positions Plus Mute as FollowsPositions 0–12: 1dB per Step for 12 StepsPositions 13–24: 2dB per Step for 12 StepsPositions 25–32: 3dB per Step for 8 Steps I²C-Compatible Serial InterfaceThree Address Pins Allow Up to 8 Devices on I²C Bus45kΩ Potentiometer End-to-End ResistanceIndustrial Temperature Range (-40°C to +85°C)16-Pin TSSOP or SO Package ApplicationsCar StereoConsumer Audio/VideoNotebook and PC AudioPortable Audio EquipmentRelated ResourcesRelated ProductsRelated PackagingTechnical DocsDesign Guides
Popular items
MAX3223EETP+, Maxim Integrated
For Space-Constrained Applications:
MAX3228E/MAX3229E: ±15kV ESD-Protected, +2.5V to +5.5V Transceivers
MAX3222E/MAX3232E/MAX3237E/MAX3241E/MAX3246E: ±15kV ESD-Protected Down to 10nA, +3.0V to +5.5V, Up to 1Mbps
For Data Cable Applications:
MAX3380E/MAX3381E: +2.35V to +5.5V, 1μA, 2Tx/2Rx Transceivers with ±15kV ESD-Protected I/O and Logic Pins
Applications
Battery-Powered Equipment
Cell Phones
Handheld Equipment
Notebook, Subnotebook, and Palmtop Computers
Peripherals
Printers
Popular items
MAX3086CSD+, Maxim Integrated
For Fault-Tolerant Applications:
MAX3430: ±80V Fault-Protected, Fail-Safe, 1/4- Unit Load, +3.3V Transceiver
For Low-Voltage Applications:
MAX3362: +3.3V, High-Speed, Transceiver in a SOT23 Package
For Multiple Transceiver Applications:
MAX3030E-MAX3033E: ±15kV ESD-Protected, +3.3V, Quad
MAX3040-MAX3045: ±10kV ESD-Protected, Quad, +5V, Transmitters
Applications
Industrial-Control Local Area Networks
Level Translators
RS-422/RS-485 Communications
Transceivers for EMI-Sensitive Applications
New Items
New items
MAX3158CAI+, Maxim Integrated
±60V Isolated Data Interface
+5V Single Supply
Low-Cost Replacement for Opto-Isolated Transceivers
True Fail-Safe Receiver
Pin-Selectable Full/Half-Duplex Operation
Phase Controls to Correct for Twisted-Pair Reversal
25μA Low-Power Shutdown Mode
Thermal Shutdown for Driver Overload Protection
28-Pin SSOP Package
Slew-Rate-Limited Reduced EMI
Applications
Industrial Controls
Level Translators
Local Area Networks (LANs)
Telecommunications
Related Resources
Related Packaging
New items
MAX8860EUA18+, Maxim Integrated
The MAX8860 low-noise, low-dropout linear regulator operates from a +2.5V to +6.5V input and is guaranteed to deliver 300mA. Typical output noise for this device is 60μVRMS, and typical dropout is 105mV at 200mA. In addition to the six available preset output voltages (+1.8V, +2.5V, +2.77V, +2.82V, +3V, and +3.3V), the Dual Mode™ feature allows the device to be configured as an adjustable output regulator from +1.25V to +6.5V.
Designed with an internal P-channel MOSFET pass transistor, the MAX8860 has a low 120μA supply current. An output fault-detection circuit indicates loss of regulation. Other features include a 10nA, logic-controlled shutdown mode, short-circuit and thermal-shutdown protection, and reverse battery protection. The MAX8860 is available in a miniature 8-pin μMAX® package.
High Output Current (300mA)
Low Output Voltage Noise: 60μVRMS
Low 105mV Dropout at 200mA Output
Low 120μA No-Load Supply Current
Thermal-Overload and Short-Circuit Protection
Reverse Battery Protection
10nA Logic-Controlled Shutdown
Active-low FAULT Indicator
Small, Space-Saving μMAX Package (1.1mm max height)
Small 2.2μF Output Capacitor Saves Space and Cost
Applications
DSP Core Power
Electronic Planners
Handheld Instruments (PDAs, Palmtops)
Palmtop Computers
PCMCIA Cards
Wireless Handsets
New items
MAX312ESE+, Maxim Integrated
Maxim's MAX312/MAX313/MAX314 analog switches feature low on-resistance (10Ω max) and 1.5Ω on-resistance matching between channels. These switches conduct equally well in either direction. They offer low leakage over temperature (2.5nA at +85°C). Low power consumption and ESD tolerance greater than 2000V.The MAX312/MAX313/MAX314 are quad, single-pole/single-throw (SPST) analog switches. The MAX312 is normally closed (NC), and the MAX313 is normally open (NO). The MAX314 has two NC switches and two NO switches. All three devices operate from a single supply of +4.5V to +30V or from dual supplies of ±4.5V to ±20V.
Pin Compatible with DG411/DG412/DG413Low On-Resistance (6.5Ω typical)Guaranteed RON Match Between Channels (1.5Ω max)Guaranteed RON Flatness over Specified Signal Range (2Ω max)Guaranteed ESD Protection > 2000V Crosstalk > 96dB at 20kHzSingle-Supply Operation: +4.5V to +30V Dual-Supply Operation: ±4.5V to ±20VRail-to-Rail Signal Handling ApplicationsAudio-Signal RoutingAvionicsCommunication SystemsData AcquisitionPBX/PABX SystemsSample-and-Hold CircuitsTest Equipment
New items
MAX8216CSD+, Maxim Integrated
The MAX8215 contains five voltage comparators, four are for monitoring +5V, -5V, +12V, and -12V, and the fifth monitors any desired voltage. The MAX8216 is identical, except it monitors ±15V supplies instead of ±12V. The resistors required to monitor these voltages and provide comparator hysteresis are included on-chip. All comparators have open-drain outputs. These devices consume 250μA max supply current over temperature.
4 Dedicated Comparators plus 1 Auxiliary Comparator
5V Dedicated Comparator Has ±1.25% Accuracy
-5V, +12V, -12V, +15V, -15V Dedicated Comparators Have ±1.5% Accuracy
Overvoltage/Undervoltage Detection or Programmable Delay Using Auxiliary Comparator
Internal 1.24V Reference with ±1% Initial Accuracy
Wide Supply Range: 2.7V to 11V
Built-In Hysteresis
250μA Max Supply Current Over Temp.
Independent Open-Drain Outputs
All Precision Components Included
Applications
Data Acquisition Systems
Industrial Controllers
Industrial Equipment
Microprocessor Voltage Monitor: +5V, -5V, +12V, -12V Supply Monitoring (MAX8215), +5V, -5V, +15V, -15V Supply Monitoring (MAX8216)
Mobile Radios
Overvoltage/Undervoltage Detection with Uncommitted Comparator
Portable Instruments
New items
MAX3042BCUE+, Maxim Integrated
ESD Protection: ±10kV—Human Body Model
Single +5V Operation
Guaranteed Device-to-Device Skew (MAX3040/MAX3041/MAX3043/MAX3044)
Pin-Compatible with 'SN75174, '26LS31C and LTC487
Hot-Swappable for Telecom Applications
Up to 20Mbps Data Rate (MAX3042B/MAX3045B)
Slew-Rate Limited (Data Rates at 2.5Mbps and 250kbps)
2nA Low-Power Shutdown Mode
1mA Operating Supply Current
±2kV EFT Fast Transient Burst Immunity
Level 2 Surge Immunity, Unshielded Cable Model
Ultra-Small 16-Pin TSSOP, 16-Pin Narrow SO, and Wide 16-Pin SO
Applications
Handheld Equipment
Industrial Motor Control
Industrial PLCs
Networking
Telecommunications Equipment
Transmitter for ESD-Sensitive Applications
New items
MAX9107ESA+, Maxim Integrated
25ns Propagation Delay350μA (1.75mW) Supply Current Per ComparatorSingle 4.5V to 5.5V Supply OperationWide Input Range Includes GroundLow 500μV Offset VoltageInternal Hysteresis Provides Clean Switching (2mV)TTL-Compatible OutputsInternal Latch (MAX9109 only)Space-Saving Packages:6-Pin SC70 (MAX9109)8-Pin SOT23 (MAX9107)14-Pin TSSOP (MAX9108) ApplicationsA/D ConvertersBattery-Powered ApplicationsLine ReceiversSampling CircuitsThreshold Detectors/DiscriminatorsZero-Crossing Detectors
New items
DS1803Z-050+, Maxim Integrated
The DS1803 addressable dual digital potentiometer features two independently controlled 256-position potentiometers. Device control is achieved through a 2-wire serial interface. Three address pins allow up to 8 DS1803's to share the same 2-wire interface. The exact wiper position of each potentiometer can be written or read. The DS1803 is available in a 16-pin DIP, 16-pin SO, and 14-pin TSSOP package. The device is available in three standard resistance values: 10kΩ, 50kΩ, and 100kΩ and is specified over the industrial temperature range.
3V or 5V OperationUltra-Low Power ConsumptionTwo Digitally Controlled, 256- Potentiometers14-Pin TSSOP (173 mil) and 16- mil) Packaging Available for Surface- ApplicationsAddressable Using 3 Address2-Wire Serial InterfaceOperating Temperature Range:Industrial: -40°C to +85°C Standard Resistance Values:\x02DS1803-010 10kΩDS1803-050 50kΩDS1803-100 100kΩ
New items
DS1881Z-050+, Maxim Integrated
Dual, Audio Log Taper PotentiometersLow THD+N and Crosstalk5V Analog Supply (Independent of Digital Supply)3V to 5V Digital Supply RangePotentiometer Settings Configurable as NV or VolatileZero-Crossing Detector Eliminates Switching NoiseTwo User-Configurable Attenuation OptionsConfiguration Option 1: 63 Positions Provide 1dB Attenuation Steps from 0dB to -62dB Plus MuteConfiguration Option 2: (Software-Compatible with the DS1808): 33 Positions Plus Mute as FollowsPositions 0–12: 1dB per Step for 12 StepsPositions 13–24: 2dB per Step for 12 StepsPositions 25–32: 3dB per Step for 8 Steps I²C-Compatible Serial InterfaceThree Address Pins Allow Up to 8 Devices on I²C Bus45kΩ Potentiometer End-to-End ResistanceIndustrial Temperature Range (-40°C to +85°C)16-Pin TSSOP or SO Package ApplicationsCar StereoConsumer Audio/VideoNotebook and PC AudioPortable Audio EquipmentRelated ResourcesRelated ProductsRelated PackagingTechnical DocsDesign Guides
New items
MAX3223EETP+, Maxim Integrated
For Space-Constrained Applications:
MAX3228E/MAX3229E: ±15kV ESD-Protected, +2.5V to +5.5V Transceivers
MAX3222E/MAX3232E/MAX3237E/MAX3241E/MAX3246E: ±15kV ESD-Protected Down to 10nA, +3.0V to +5.5V, Up to 1Mbps
For Data Cable Applications:
MAX3380E/MAX3381E: +2.35V to +5.5V, 1μA, 2Tx/2Rx Transceivers with ±15kV ESD-Protected I/O and Logic Pins
Applications
Battery-Powered Equipment
Cell Phones
Handheld Equipment
Notebook, Subnotebook, and Palmtop Computers
Peripherals
Printers
New items
MAX3086CSD+, Maxim Integrated
For Fault-Tolerant Applications:
MAX3430: ±80V Fault-Protected, Fail-Safe, 1/4- Unit Load, +3.3V Transceiver
For Low-Voltage Applications:
MAX3362: +3.3V, High-Speed, Transceiver in a SOT23 Package
For Multiple Transceiver Applications:
MAX3030E-MAX3033E: ±15kV ESD-Protected, +3.3V, Quad
MAX3040-MAX3045: ±10kV ESD-Protected, Quad, +5V, Transmitters
Applications
Industrial-Control Local Area Networks
Level Translators
RS-422/RS-485 Communications
Transceivers for EMI-Sensitive Applications
Don’t hesitate to ask questions for better clarification.