30 & 50 MHz differential probes for MX 9030-Z, MTX 1032-B and MTX 1032-C oscilloscopes An indispensable accessory for analogue or digital oscilloscopes to visualise signals that are not referenced to the ground! A range of three models to fulfil different requirements. 1 or 2 input channels. Coaxial or banana measuring leads/long length banana leads. A model with coaxial inputs that can be used with oscilloscope probes. 30 MHz or 50 MHz bandwidth. Mains or battery power (depending on model). Presented in laboratory casing or handheld probe with wrist strap. Input voltage differential range of ±0.1 → ±600 V (depending on model). Meets standards up to 600 V - CAT IV (depending on model). Compatible with all types of class 1 oscilloscope. Mechanical compatibility with oscilloscopes from the MTX family. Conforms to DBT safety standards in accordance with IEC 61010-1 (2001). Conforms to CEM standards in accordance with NF EN 61326-1 (07/97) + A1 (10/98) + A2 (2001).

30 & 50 MHz differential probes for MX 9030-Z, MTX 1032-B and MTX 1032-C oscilloscopes An indispensable accessory for analogue or digital oscilloscopes to visualise signals that are not referenced to the ground! A range of three models to fulfil different requirements. 1 or 2 input channels. Coaxial or banana measuring leads/long length banana leads. A model with coaxial inputs that can be used with oscilloscope probes. 30 MHz or 50 MHz bandwidth. Mains or battery power (depending on model). Presented in laboratory casing or handheld probe with wrist strap. Input voltage differential range of ±0.1 → ±600 V (depending on model). Meets standards up to 600 V - CAT IV (depending on model). Compatible with all types of class 1 oscilloscope. Mechanical compatibility with oscilloscopes from the MTX family. Conforms to DBT safety standards in accordance with IEC 61010-1 (2001). Conforms to CEM standards in accordance with NF EN 61326-1 (07/97) + A1 (10/98) + A2 (2001).

MX5006 Bench Multimeter The MX 5006 bench- top digital multimeter can be used for TRMS AC + DC measurements. The 6000 count double transflective backlit LCD screen with bargraph and central zero offers instantaneous display of the signal variations. To ensure good measurement stability on variable speed drives, the MX 5006 bench multimeter is equipped with a 300 Hz PWM filter. DC, AC and AC + DC current measurement DC, AC and AC + DC voltage measurement, as well as peak voltages Resistance up to 60 MΩ and continuity RMS values μV resolution Diode test Capacitance from 6 nF to 60 mF DC, AC and AC+DC voltage measurement, as well as peak voltages Frequency up to 60 kHz 60 mV calibre VDC accuracy: 0.05 % R Temperature (K thermocouple) from -200 °C to +1200 °C USB communication – SCPI commands Standards IEC 61010, 1000 V CAT III Supplied with EU Mains power cable, 1.5 m red straight/straight cable, 1.5 m black straight/straight cable, red CAT IV 1 kV test probe, black CAT IV 1 kV test probe, operating manual on CD and start-up guide on paper.

MX5060 Bench Digital Multimeter The MX 5060 bench- top digital multimeter can be used for TRMS AC + DC measurements. The 60000 count double transflective backlit LCD screen with bargraph and central zero offers instantaneous display of the signal variations. To ensure good measurement stability on variable speed drives, the MX 5060 bench multimeter is equipped with a 300 Hz PWM filter. Simple and effective for your laboratories • Error-free current measurement up to 10 A thanks to the single A terminal • TRMS AC+DC and up to 60,000 counts displayed with 100 kHz bandwidth • Measurement stability with the VLowZ calibre which eliminates spurious voltages • Measurement stability on variable speed drives with the 300 Hz PWM filter • Recording and monitoring of the signed Min, Max and Peak values • Compliance with IEC 61010 1000 V CAT III double insulation, optimized safety Key features of the MX5060 Bench Digital Multimeter • DC, AC and AC + DC current measurement • DC, AC and AC + DC voltage measurement, as well as peak voltages • Resistance up to 60 MΩ and continuity • RMS values • μV resolution • Diode test • Capacitance from 6 nF to 60 mF • DC, AC and AC+DC voltage measurement, as well as peak voltages • Frequency up to 60 kHz • 60 mV calibre • VDC accuracy: 0.05 % R • Temperature (K thermocouple) from -200 °C to +1200 °C • USB communication – SCPI commands Typical applications for the MX5060 Bench Digital Multimeter • Electrical engineering and electronics sector What’s included? • EU Mains power cable • 1.5 m red straight/straight cable • 1.5 m black straight/straight cable • Red CAT IV 1 kV test probe, black CAT IV 1 kV test probe • Operating manual on CD • Start-up guide on paper and remote programming manual. Standards IEC 61010, 1000 V CAT III Supplied with ...

30 & 50 MHz differential probes for MX 9030-Z, MTX 1032-B and MTX 1032-C oscilloscopes An indispensable accessory for analogue or digital oscilloscopes to visualise signals that are not referenced to the ground! A range of three models to fulfil different requirements. 1 or 2 input channels. Coaxial or banana measuring leads/long length banana leads. A model with coaxial inputs that can be used with oscilloscope probes. 30 MHz or 50 MHz bandwidth. Mains or battery power (depending on model). Presented in laboratory casing or handheld probe with wrist strap. Input voltage differential range of ±0.1 → ±600 V (depending on model). Meets standards up to 600 V - CAT IV (depending on model). Compatible with all types of class 1 oscilloscope. Mechanical compatibility with oscilloscopes from the MTX family. Conforms to DBT safety standards in accordance with IEC 61010-1 (2001). Conforms to CEM standards in accordance with NF EN 61326-1 (07/97) + A1 (10/98) + A2 (2001).

30 & 50 MHz differential probes for MX 9030-Z, MTX 1032-B and MTX 1032-C oscilloscopes An indispensable accessory for analogue or digital oscilloscopes to visualise signals that are not referenced to the ground! A range of three models to fulfil different requirements. 1 or 2 input channels. Coaxial or banana measuring leads/long length banana leads. A model with coaxial inputs that can be used with oscilloscope probes. 30 MHz or 50 MHz bandwidth. Mains or battery power (depending on model). Presented in laboratory casing or handheld probe with wrist strap. Input voltage differential range of ±0.1 → ±600 V (depending on model). Meets standards up to 600 V - CAT IV (depending on model). Compatible with all types of class 1 oscilloscope. Mechanical compatibility with oscilloscopes from the MTX family. Conforms to DBT safety standards in accordance with IEC 61010-1 (2001). Conforms to CEM standards in accordance with NF EN 61326-1 (07/97) + A1 (10/98) + A2 (2001).

30 & 50 MHz differential probes for MX 9030-Z, MTX 1032-B and MTX 1032-C oscilloscopes An indispensable accessory for analogue or digital oscilloscopes to visualise signals that are not referenced to the ground! A range of three models to fulfil different requirements. 1 or 2 input channels. Coaxial or banana measuring leads/long length banana leads. A model with coaxial inputs that can be used with oscilloscope probes. 30 MHz or 50 MHz bandwidth. Mains or battery power (depending on model). Presented in laboratory casing or handheld probe with wrist strap. Input voltage differential range of ±0.1 → ±600 V (depending on model). Meets standards up to 600 V - CAT IV (depending on model). Compatible with all types of class 1 oscilloscope. Mechanical compatibility with oscilloscopes from the MTX family. Conforms to DBT safety standards in accordance with IEC 61010-1 (2001). Conforms to CEM standards in accordance with NF EN 61326-1 (07/97) + A1 (10/98) + A2 (2001).

MX5006 Bench Multimeter The MX 5006 bench- top digital multimeter can be used for TRMS AC + DC measurements. The 6000 count double transflective backlit LCD screen with bargraph and central zero offers instantaneous display of the signal variations. To ensure good measurement stability on variable speed drives, the MX 5006 bench multimeter is equipped with a 300 Hz PWM filter. DC, AC and AC + DC current measurement DC, AC and AC + DC voltage measurement, as well as peak voltages Resistance up to 60 MΩ and continuity RMS values μV resolution Diode test Capacitance from 6 nF to 60 mF DC, AC and AC+DC voltage measurement, as well as peak voltages Frequency up to 60 kHz 60 mV calibre VDC accuracy: 0.05 % R Temperature (K thermocouple) from -200 °C to +1200 °C USB communication – SCPI commands Standards IEC 61010, 1000 V CAT III Supplied with EU Mains power cable, 1.5 m red straight/straight cable, 1.5 m black straight/straight cable, red CAT IV 1 kV test probe, black CAT IV 1 kV test probe, operating manual on CD and start-up guide on paper.

MX5060 Bench Digital Multimeter The MX 5060 bench- top digital multimeter can be used for TRMS AC + DC measurements. The 60000 count double transflective backlit LCD screen with bargraph and central zero offers instantaneous display of the signal variations. To ensure good measurement stability on variable speed drives, the MX 5060 bench multimeter is equipped with a 300 Hz PWM filter. Simple and effective for your laboratories • Error-free current measurement up to 10 A thanks to the single A terminal • TRMS AC+DC and up to 60,000 counts displayed with 100 kHz bandwidth • Measurement stability with the VLowZ calibre which eliminates spurious voltages • Measurement stability on variable speed drives with the 300 Hz PWM filter • Recording and monitoring of the signed Min, Max and Peak values • Compliance with IEC 61010 1000 V CAT III double insulation, optimized safety Key features of the MX5060 Bench Digital Multimeter • DC, AC and AC + DC current measurement • DC, AC and AC + DC voltage measurement, as well as peak voltages • Resistance up to 60 MΩ and continuity • RMS values • μV resolution • Diode test • Capacitance from 6 nF to 60 mF • DC, AC and AC+DC voltage measurement, as well as peak voltages • Frequency up to 60 kHz • 60 mV calibre • VDC accuracy: 0.05 % R • Temperature (K thermocouple) from -200 °C to +1200 °C • USB communication – SCPI commands Typical applications for the MX5060 Bench Digital Multimeter • Electrical engineering and electronics sector What’s included? • EU Mains power cable • 1.5 m red straight/straight cable • 1.5 m black straight/straight cable • Red CAT IV 1 kV test probe, black CAT IV 1 kV test probe • Operating manual on CD • Start-up guide on paper and remote programming manual. Standards IEC 61010, 1000 V CAT III Supplied with ...

30 & 50 MHz differential probes for MX 9030-Z, MTX 1032-B and MTX 1032-C oscilloscopes An indispensable accessory for analogue or digital oscilloscopes to visualise signals that are not referenced to the ground! A range of three models to fulfil different requirements. 1 or 2 input channels. Coaxial or banana measuring leads/long length banana leads. A model with coaxial inputs that can be used with oscilloscope probes. 30 MHz or 50 MHz bandwidth. Mains or battery power (depending on model). Presented in laboratory casing or handheld probe with wrist strap. Input voltage differential range of ±0.1 → ±600 V (depending on model). Meets standards up to 600 V - CAT IV (depending on model). Compatible with all types of class 1 oscilloscope. Mechanical compatibility with oscilloscopes from the MTX family. Conforms to DBT safety standards in accordance with IEC 61010-1 (2001). Conforms to CEM standards in accordance with NF EN 61326-1 (07/97) + A1 (10/98) + A2 (2001).