Featured Products
The MikroElektronika CAP TOUCH 5 CLICK is a capacitive touch sensing click board. It features the CY8CMBR3106S-LQXI CapSense® Express™ controller...
The MikroElektronika TMR Angle Click is a click board which is used for developing applications that range from steering angle applications with...
The MikroElektronika TFT board which is a 5 inch display board which features the standardized 2x20-pin display connector. It also integrates a r...
MikroElektronika Cap Touch Click board The MikroElektronika cap touch click board is a capacitive touch sensing but...
MikroElektronika MIKROE-2894 DC-DC Click Board The MikroElektronika MIKROE-2894 is a BOOST 2 click DC-DC click boar...
BATT-Man click BATT-MAN click is a very versatile battery operated power manager. When powered via mikroBUS™, it wi...
MikroElektronika Buck-Boost Converter Click Board The MikroElektronika Buck-Boost converter click board is a buck-b...
MikroElektronika DALI 2 Click board The MikroElektronika DALI 2 click board is a simple and reliable interface to D...
MikroElektronika mikroBUS Shuttle board The MikroElektronika mikroBUS shuttle board is a small add-on board, which...
There are many kinds of touch sensors on the market, but every one of them has some unique features that make it stand out from the crowd. TouchK...
MikroElektronika GeoMagnetic Click Board The MikroElektronika Geomagnetic click board carries the BMM150, a three-a...
MikroElektronika ADC 6 Click 24-bit The MikroElektronika ADC 6 click is an advanced 24-bit multi-channel analogue t...
Popular Categories For MikroElektronika
Popular Items
Popular items
MIKROE-3786, MikroElektronika
The MikroElektronika CAP TOUCH 5 CLICK is a capacitive touch sensing click board. It features the CY8CMBR3106S-LQXI CapSense® Express™ controller. This capacitive touch sensing click board supports up to 16 capacitive sensing inputs, eliminates time-consuming firmware development.
Easy-to-implement
ideal for implementing capacitive buttons, sliders, and proximity sensing solutions with minimal development-cycle times
Popular items
MIKROE-3769, MikroElektronika
The MikroElektronika TMR Angle Click is a click board which is used for developing applications that range from steering angle applications with the highest functional safety requirements to motors for wipers, pumps and actuators and electric motors in general.
The TMR Angle click board is supported by a mikroSDK compliant library, which includes functions that simplify software development.
Popular items
MIKROE-3792, MikroElektronika
The MikroElektronika TFT board which is a 5 inch display board which features the standardized 2x20-pin display connector. It also integrates a resistive touch panel. The display features an excellent contrast ratio and uniform brightness.
Touch Screen Resistive
Graphic controller SSD1963
Excellent contrast ratio
Uniform brightness
Popular items
MIKROE-2888, MikroElektronika
MikroElektronika Cap Touch Click board
The MikroElektronika cap touch click board is a capacitive touch sensing button. This click can sense touch even through plastic, wood or other dielectric materials that are used to protect the surface of the PCB or the sensor pad. The MIKROE-2888 cap touch click can be activated by touch and unlike the mechanical button, the capacitive touch button lasts much longer. This touch-sensitive click on a device allows to accommodate a compact design and opens possibilities for various kinds of human-machine interface.
Features and Benefits
A single-key QTouch® touch sensor IC
Auto-calibrating and detection integration algorithms improve touch sensing quality
Input supply voltage is 3.3V and 5V
Max ON duration for improved obstacle problem handling
Patented QTouch® sensing technology allows for low power consumption
Applications
Environments with a switch or a button requirement
Touch activated lighting controls and control panels
Popular items
MIKROE-2894, MikroElektronika
MikroElektronika MIKROE-2894 DC-DC Click Board
The MikroElektronika MIKROE-2894 is a BOOST 2 click DC-DC click board regulator has a fixed 5V output, which can be obtained from any low voltage input such as NiCd, NiMH or one cell Li-Po/Li-Ion batteries. This click features very high-efficiency, low noise and anti-ringing voltage output and inrush current limiting with the internal soft-start as well as true disconnect option for minimized power drain, when in shutdown mode.
Features and Benefits
General-purpose Input/output (GPIO) interface
Offers low noise and low voltage start-up
Offers soft start and true disconnect options
On-board MCP1642B-ADJ 1MHz low-voltage start-up synchronous boost regulator
Provides good efficiency for battery-powered devices
Selectable input voltage ranges between 3.3V and 5V
Applications
Battery-operated devices
GPS modules
Handheld instruments
Portable embedded electronic devices
USB emergency backup chargers
Popular items
MIKROE-2901, MikroElektronika
BATT-Man click
BATT-MAN click is a very versatile battery operated power manager. When powered via mikroBUS™, it will charge the connected Li-Ion/Li-Po 3.7V battery, while providing the output voltage on all its outputs at the same time. The interesting feature of this device is that it can provide additional current to the connected load if the current provided from the mikroBUS™
socket is not enough. This is possible by utilizing the connected battery and by employing intelligent power routing algorithms of BATT-MAN click.
Popular items
MIKROE-2917, MikroElektronika
MikroElektronika Buck-Boost Converter Click Board
The MikroElektronika Buck-Boost converter click board is a buck-boost voltage regulator, a switching regulator topology that combines principles of the buck conversion (step-down) and the boost conversion (step-up). By combining these two topologies, MCP16331 INV click can output a regulated DC voltage, which can be set in the code for input voltage, both greater and less than the output voltage. This click works in an inverting configuration, providing an output voltage which is negative concerning the GND level. The input supply voltage rating is between 4.5V and 16V. Output voltage rating is between -2.7V and -5.4V. The output current rating is 500mA max.
Features and Benefits
Adjustable voltage
GPIO and SPI interface
Internal soft start
Negative power supply source with very high switching efficiency
Overvoltage protection
Sustains a reasonably high current
Popular items
MIKROE-2672, MikroElektronika
MikroElektronika DALI 2 Click board
The MikroElektronika DALI 2 click board is a simple and reliable interface to DALI and DALI 2 communication bus, making it possible to dive into the world of intelligent lighting. The DALI network is an international standardized protocol for intelligent digital lighting control, which enables implementation of robust, scalable and flexible lighting networks. This DALI network comes with a controller and one or more slave devices which include LED drivers, dimmers and ballasts equipped with DALI interfaces. It can be used to develop applications for controlling other slave nodes of the DALI network or to develop slave node applications that would respond to the commands sent by the master control unit.
Features and Benefits
GPIO interface
Operating supply voltage ranges between 3.3V or 5V
Popular items
MIKROE-2882, MikroElektronika
MikroElektronika mikroBUS Shuttle board
The MikroElektronika mikroBUS shuttle board is a small add-on board, which is intended to be used with shuttle click, to expand the mikroBUS with additional stacking options. This small add-on board has one mikroBUS equipped on itself and it is connected to the shuttle click via a flat ribbon cable (20cm). Being connected with a flat ribbon cable to shuttle click, mikroBUS shuttle allows being freely positioned according to the requirements of the application.
Features and Benefits
Four mounting holes to fix the shuttle in place
ICD BOX header to connect to existing shuttle click
One mikroBUS slot that can be populated with any click board
Operating supply voltage is 3.3V or 5V
Product weight is 27g
SPI, I2C and UART interface support
Popular items
MIKROE-2891, MikroElektronika
There are many kinds of touch sensors on the market, but every one of them has some unique features that make it stand out from the crowd. TouchKey 3 click is equipped with seven advanced capacitive sensors, based on the proprietary QTouch® technology. Besides quite a large number of QTouch® capacitive sensor channels, TouchKey 3 click also offers some additional features, such as the Adjacent Key Suppression (AKS®), a technology that ensures correct button press, even when the touch sensing pads are placed close to each other. With its many sensing channels and their advanced sensing technologies, TouchKey 3 really stands out from the crowd. It can be used as a multi-button control pad for various embedded applications, replacing mechanical buttons, which are typically prone to malfunctions, with elegant and durable touch sensing pads.
Popular items
MIKROE-2935, MikroElektronika
MikroElektronika GeoMagnetic Click Board
The MikroElektronika Geomagnetic click board carries the BMM150, a three-axis geomagnetic sensor from Bosch Sensortec. The on-board BMM150 sensor uses FlipCore technology for tuned performance. It features digital interface, low voltage operation, low current consumption, short wake-up time and advanced system power management. The click also offers an advanced programmable interrupt engine for flexible design and uses SPI or I2C interface to communicate with the host controller.
Features and Benefits
Four power modes
Interface used GPIO, I2C and SPI
Operating supply voltage is 3.3V
Programmable interrupt engine
Three-axis geomagnetic sensor
Applications
Augmented reality applications
Gaming controllers
Navigation
Tilt-compensated electronic compass for map rotation
Popular items
MIKROE-2932, MikroElektronika
MikroElektronika ADC 6 Click 24-bit
The MikroElektronika ADC 6 click is an advanced 24-bit multi-channel analogue to digital converter. It has 8 fully differential or 15 single-ended/pseudo sampling inputs and very flexible routing capabilities. This ADC 6 click is the AD7124-8, an 8 channel, 24-bit sigma-delta ADC with reference and programmable gain array from analogue devices. The maximum output data rate varies from 2400 SPS up to 19, 200 SPS (samples per second), concerning the selected power mode. To configure and connect the device and connect the input channels, the two 2x10 pin headers are used. This allows for unrestrained configuration of the device, so it can use both bipolar and unipolar input sources with selectable reference voltages, external clock, auxiliary power switch and more.
Features and Benefits
Input voltage is 3.3V Interface: GPIO and SPI Low noise Low power
Applications
Industrial process control Instrumentation Pressure measurement Smart transmitters Temperature measurement
Certifications
ANSI/ESD S20.20:2014 BS EN 61340-5-1:2007
New Items
New items
MIKROE-3786, MikroElektronika
The MikroElektronika CAP TOUCH 5 CLICK is a capacitive touch sensing click board. It features the CY8CMBR3106S-LQXI CapSense® Express™ controller. This capacitive touch sensing click board supports up to 16 capacitive sensing inputs, eliminates time-consuming firmware development.
Easy-to-implement
ideal for implementing capacitive buttons, sliders, and proximity sensing solutions with minimal development-cycle times
New items
MIKROE-3769, MikroElektronika
The MikroElektronika TMR Angle Click is a click board which is used for developing applications that range from steering angle applications with the highest functional safety requirements to motors for wipers, pumps and actuators and electric motors in general.
The TMR Angle click board is supported by a mikroSDK compliant library, which includes functions that simplify software development.
New items
MIKROE-3792, MikroElektronika
The MikroElektronika TFT board which is a 5 inch display board which features the standardized 2x20-pin display connector. It also integrates a resistive touch panel. The display features an excellent contrast ratio and uniform brightness.
Touch Screen Resistive
Graphic controller SSD1963
Excellent contrast ratio
Uniform brightness
New items
MIKROE-2888, MikroElektronika
MikroElektronika Cap Touch Click board
The MikroElektronika cap touch click board is a capacitive touch sensing button. This click can sense touch even through plastic, wood or other dielectric materials that are used to protect the surface of the PCB or the sensor pad. The MIKROE-2888 cap touch click can be activated by touch and unlike the mechanical button, the capacitive touch button lasts much longer. This touch-sensitive click on a device allows to accommodate a compact design and opens possibilities for various kinds of human-machine interface.
Features and Benefits
A single-key QTouch® touch sensor IC
Auto-calibrating and detection integration algorithms improve touch sensing quality
Input supply voltage is 3.3V and 5V
Max ON duration for improved obstacle problem handling
Patented QTouch® sensing technology allows for low power consumption
Applications
Environments with a switch or a button requirement
Touch activated lighting controls and control panels
New items
MIKROE-2894, MikroElektronika
MikroElektronika MIKROE-2894 DC-DC Click Board
The MikroElektronika MIKROE-2894 is a BOOST 2 click DC-DC click board regulator has a fixed 5V output, which can be obtained from any low voltage input such as NiCd, NiMH or one cell Li-Po/Li-Ion batteries. This click features very high-efficiency, low noise and anti-ringing voltage output and inrush current limiting with the internal soft-start as well as true disconnect option for minimized power drain, when in shutdown mode.
Features and Benefits
General-purpose Input/output (GPIO) interface
Offers low noise and low voltage start-up
Offers soft start and true disconnect options
On-board MCP1642B-ADJ 1MHz low-voltage start-up synchronous boost regulator
Provides good efficiency for battery-powered devices
Selectable input voltage ranges between 3.3V and 5V
Applications
Battery-operated devices
GPS modules
Handheld instruments
Portable embedded electronic devices
USB emergency backup chargers
New items
MIKROE-2901, MikroElektronika
BATT-Man click
BATT-MAN click is a very versatile battery operated power manager. When powered via mikroBUS™, it will charge the connected Li-Ion/Li-Po 3.7V battery, while providing the output voltage on all its outputs at the same time. The interesting feature of this device is that it can provide additional current to the connected load if the current provided from the mikroBUS™
socket is not enough. This is possible by utilizing the connected battery and by employing intelligent power routing algorithms of BATT-MAN click.
New items
MIKROE-2917, MikroElektronika
MikroElektronika Buck-Boost Converter Click Board
The MikroElektronika Buck-Boost converter click board is a buck-boost voltage regulator, a switching regulator topology that combines principles of the buck conversion (step-down) and the boost conversion (step-up). By combining these two topologies, MCP16331 INV click can output a regulated DC voltage, which can be set in the code for input voltage, both greater and less than the output voltage. This click works in an inverting configuration, providing an output voltage which is negative concerning the GND level. The input supply voltage rating is between 4.5V and 16V. Output voltage rating is between -2.7V and -5.4V. The output current rating is 500mA max.
Features and Benefits
Adjustable voltage
GPIO and SPI interface
Internal soft start
Negative power supply source with very high switching efficiency
Overvoltage protection
Sustains a reasonably high current
New items
MIKROE-2672, MikroElektronika
MikroElektronika DALI 2 Click board
The MikroElektronika DALI 2 click board is a simple and reliable interface to DALI and DALI 2 communication bus, making it possible to dive into the world of intelligent lighting. The DALI network is an international standardized protocol for intelligent digital lighting control, which enables implementation of robust, scalable and flexible lighting networks. This DALI network comes with a controller and one or more slave devices which include LED drivers, dimmers and ballasts equipped with DALI interfaces. It can be used to develop applications for controlling other slave nodes of the DALI network or to develop slave node applications that would respond to the commands sent by the master control unit.
Features and Benefits
GPIO interface
Operating supply voltage ranges between 3.3V or 5V
New items
MIKROE-2882, MikroElektronika
MikroElektronika mikroBUS Shuttle board
The MikroElektronika mikroBUS shuttle board is a small add-on board, which is intended to be used with shuttle click, to expand the mikroBUS with additional stacking options. This small add-on board has one mikroBUS equipped on itself and it is connected to the shuttle click via a flat ribbon cable (20cm). Being connected with a flat ribbon cable to shuttle click, mikroBUS shuttle allows being freely positioned according to the requirements of the application.
Features and Benefits
Four mounting holes to fix the shuttle in place
ICD BOX header to connect to existing shuttle click
One mikroBUS slot that can be populated with any click board
Operating supply voltage is 3.3V or 5V
Product weight is 27g
SPI, I2C and UART interface support
New items
MIKROE-2891, MikroElektronika
There are many kinds of touch sensors on the market, but every one of them has some unique features that make it stand out from the crowd. TouchKey 3 click is equipped with seven advanced capacitive sensors, based on the proprietary QTouch® technology. Besides quite a large number of QTouch® capacitive sensor channels, TouchKey 3 click also offers some additional features, such as the Adjacent Key Suppression (AKS®), a technology that ensures correct button press, even when the touch sensing pads are placed close to each other. With its many sensing channels and their advanced sensing technologies, TouchKey 3 really stands out from the crowd. It can be used as a multi-button control pad for various embedded applications, replacing mechanical buttons, which are typically prone to malfunctions, with elegant and durable touch sensing pads.
New items
MIKROE-2935, MikroElektronika
MikroElektronika GeoMagnetic Click Board
The MikroElektronika Geomagnetic click board carries the BMM150, a three-axis geomagnetic sensor from Bosch Sensortec. The on-board BMM150 sensor uses FlipCore technology for tuned performance. It features digital interface, low voltage operation, low current consumption, short wake-up time and advanced system power management. The click also offers an advanced programmable interrupt engine for flexible design and uses SPI or I2C interface to communicate with the host controller.
Features and Benefits
Four power modes
Interface used GPIO, I2C and SPI
Operating supply voltage is 3.3V
Programmable interrupt engine
Three-axis geomagnetic sensor
Applications
Augmented reality applications
Gaming controllers
Navigation
Tilt-compensated electronic compass for map rotation
New items
MIKROE-2932, MikroElektronika
MikroElektronika ADC 6 Click 24-bit
The MikroElektronika ADC 6 click is an advanced 24-bit multi-channel analogue to digital converter. It has 8 fully differential or 15 single-ended/pseudo sampling inputs and very flexible routing capabilities. This ADC 6 click is the AD7124-8, an 8 channel, 24-bit sigma-delta ADC with reference and programmable gain array from analogue devices. The maximum output data rate varies from 2400 SPS up to 19, 200 SPS (samples per second), concerning the selected power mode. To configure and connect the device and connect the input channels, the two 2x10 pin headers are used. This allows for unrestrained configuration of the device, so it can use both bipolar and unipolar input sources with selectable reference voltages, external clock, auxiliary power switch and more.
Features and Benefits
Input voltage is 3.3V Interface: GPIO and SPI Low noise Low power
Applications
Industrial process control Instrumentation Pressure measurement Smart transmitters Temperature measurement
Certifications
ANSI/ESD S20.20:2014 BS EN 61340-5-1:2007
Don’t hesitate to ask questions for better clarification.