Featured Products
J-Link PRO Probe J-Link PRO is a JTAG/SWD programming and debug probe supporting a large number of processor cores and comes with integrated l...
J-Link 19-Pin Cortex-M Adapter The J-Link 19-pin Cortex-M Adapter allows JTAG, SWD and SWO connections between J-L...
J-Trace PRO Probe J-Trace PRO for Cortex-M enables continuous streaming trace via its Gigabit Ethernet interface, lifting the limitations of i...
J-Link 9-Pin Cortex-M Adapter The J-Link 9-pin Cortex-M Adapter allows JTAG, SWD and SWO connections between J-Lin...
Flasher STM8 Programmer Flasher STM8 programmer for STM8x series of microcontrollers with on-chip Flash memory. Supported Processors...
J-Link USB Isolator Board The J-Link USB Isolator may be connected in a J-Link Probe to Host PC USB link to provi...
J-Link BASE Probe J-Link BASE is a JTAG programming and debug probe supporting a large number of processor cores. J-Link is supported by all m...
J-Link EDU J-Link EDU is a JTAG programming and debug probe supporting a large number of processor cores. Functionally identical to the J-Link...
J-Link 10-Pin Needle Adapter The J-Link 10-pin Needle Adapter has been designed to connect a J-Link Probe to a PCB...
J-Link ARM JTAG Isolator Board The J-Link JTAG Isolator can be connected between a J-Link Probe and an ARM-board...
J-Link Target Supply Adapter The J-Link Target Supply Adapter provides an adjustable power supply to a target boar...
J-Link RX Adapter The J-Link RX Adapter maps from the J-Link 20-pin 0.1in connector to the 14-pin 0.1in Renesas co...
Popular Categories For SEGGER
Popular Items
Popular items
8.12.00 J-Link PRO, SEGGER
J-Link PRO Probe
J-Link PRO
is a JTAG/SWD programming and debug probe supporting a large number of processor cores and comes with integrated licenses for unlimited breakpoints in Flash memory, RDI/RDDI, GDB Server and J-Flash. An Ethernet connection allows use of the debug probe far away from the PC, over a hard-wired or wireless network.
Supported Processors
ARM7/9/11, Cortex-A5/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5
Microchip PIC32
Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N
Features
Direct download into Flash memory of most microcontrollers supported
Download speed up to 3MB/sec
10/100 Ethernet via RJ45 socket
Web interface for easy TCP/IP configuration (built-in webserver)
Supports concurrent access to CPU by multiple applications
Automatic core recognition
Supports multiple target interfaces: JTAG, SWD
Supports SWD/SWV (Serial Wire Debug / Serial Wire Viewer)
Supports J-Flash Production Flash programming
Maximum target interface speed: 50MHz
Maximum SWO sampling speed: 100MHz
Wide target voltage range: +1.2V to +5Vdc
Embedded Trace Buffer (ETB) support
Various target adapters and optical isolation adapters available
RDI / RDDI interface
Powered via USB connector
Support for adaptive clocking
All JTAG signals can be monitored, target voltage can be measured
Target power supply: 300mA with overload protection
Target interface: JTAG/SWD 20-pin
PC interface: USB 2.0 HS or Ethernet RJ45 socket
Galvanic isolation from host system via Ethernet
Power and RESET LEDs
Dimensions: 100 x 53 x 27mm
Cross-platform support (runs on Windows, Linux, Mac OS X)
Memory viewer (J-Mem) included
Software Developer Kit (SDK) available
Free software updates, 2 years of support
Target Adapters & Adapter Cables
131-1325
J-Link Target Power Supply Adapter
131-1326
J-Link 1...
Popular items
8.06.00 J-Link 19-Pin Cortex M Adapter, SEGGER
J-Link 19-Pin Cortex-M Adapter
The
J-Link 19-pin Cortex-M Adapter
allows JTAG, SWD and SWO connections between J-Link and ARM Cortex-M based target hardware systems.
Supported Probes
J-Link BASE, J-Link PLUS, J-Link PRO, J-Link ULTRA+, J-Link EDU, Flasher ARM, Flasher Portable
Features
Input from J-Link probe via 20-pin 0.1in socket
Output to Target via 19-pin 0.05in Samtec FTSH connector
TRST can be connected to pin 9 of the Cortex-M adapter if required
Popular items
8.18.00 J-Trace PRO for Cortex M, SEGGER
J-Trace PRO Probe
J-Trace PRO for Cortex-M
enables continuous streaming trace via its Gigabit Ethernet interface, lifting the limitations of internal buffers and slow data transmission. J-Trace PRO can capture complete traces over long periods - thereby enabling the recording of infrequent, hard-to-reproduce bugs. It also offers extended trace features, such as code coverage and execution profiling.
Supported Processors
ARM Cortex-M0/M0+/M1/M3/M4/M7
Features
Supports Streaming Trace (trace data sent to PC/debugger in real time, unlimited trace buffer)
Full J-Link functionality
Gigabit Ethernet interface via RJ45 socket
USB 2.0 HS interface (480MBit/s)
Target interface: JTAG/SWD 20-pin, JTAG/SWD + Trace 19-pin
JTAG speed: 50MHz
Supports Cortex-M devices up to 150MHz ETM trace clock (300MHz CPU clock)
Supports ARM Embedded Trace Macrocell (ETM)
Supports ARM Embedded Trace Buffer (ETB)
Supports ARM Micro Trace Buffer (MTB)
64MB on-board trace buffer for legacy one-shot tracing mode
Dimensions: 123 x 68 x 30mm
Free software updates, 2 years of support
Supplied with
Ethernet cable, USB cable, 0.05in 20-pin ribbon trace cable, 0.1in 20-pin ribbon cable
Popular items
8.06.02 J-Link 9-Pin Cortex M Adapter, SEGGER
J-Link 9-Pin Cortex-M Adapter
The
J-Link 9-pin Cortex-M Adapter
allows JTAG, SWD and SWO connections between J-Link and ARM Cortex-M based target hardware systems.
Supported Probes
J-Link BASE, J-Link PLUS, J-Link PRO, J-Link ULTRA+, J-Link EDU, Flasher ARM, Flasher Portable
Features
Input from J-Link probe via 20-pin 0.1in socket
Output to Target via 9-pin 0.05in Samtec FTSH connector
TRST can be connected to pin 9 of the Cortex-M adapter if required
Popular items
5.09.01 Flasher STM8, SEGGER
Flasher STM8 Programmer
Flasher STM8
programmer for STM8x series of microcontrollers with on-chip Flash memory.
Supported Processors
STMicroelectronics STM8S/STM8L/STM8AF/STM8AL
Features
Integrated optical isolation between host and target system
Target interface: 4-pin SWIM connector
Host interface: USB 2.0 or RS-232 DE9 connector
10/100 Ethernet via RJ45 connector
Target voltage can be measured & monitored during program run
Target power supply via pin 1 of 4-pin interface (up to 300mA with overload protection)
Windows PC software included
ASCII command interface to control Flasher without PC program
Free software updates, 2 years of support
Supplied with
Ethernet cable, 4-pin target ribbon cable, RS-232 serial cable, USB cable
Popular items
8.07.02 USB Isolator, SEGGER
J-Link USB Isolator Board
The
J-Link
USB
Isolator
may be connected in a J-Link Probe to Host PC USB link to provide electrical isolation. This is essential when development tools are not connected to the same ground as the application.
Compatible Probes
All J-Link tools and production programmers that use USB
Features
3kV DC transformer isolation for 1sec
Propagation delay: Maximum 70ns
Maximum 200mA VBus current to J-Link Probe
USB 2.0 FS capable
Short-circuit protection
Host connection: mini-USB
J-Link connection: USB-A
2 x LEDs: VBus Power On and VBus Overload
Popular items
8.08.00 J-LINK BASE, SEGGER
J-Link BASE Probe
J-Link BASE
is a JTAG programming and debug probe supporting a large number of processor cores. J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others.
Supported Processors
ARM7/9/11, Cortex-A5/A7/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5
Microchip PIC32
Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N
Features
Direct download into Flash memory of most microcontrollers supported
Download speed up to 1MB/second
Supports unlimited breakpoints in Flash memory
Supports breakpoints in external Flash memory of Cortex-M systems
Supports concurrent access to CPU by multiple applications
GDB Server included: allows using J-Link remotely via TCP/IP
Supports multiple target interfaces: JTAG, SWD
Supports SWV/SWO (Serial Wire Viewer / Serial Wire Output)
Wide target voltage range: +1.2V to +3.3V, +5V tolerant
Supports JTAG chains with multiple devices
Embedded Trace Buffer (ETB) support
Various target adapters and optical isolation adapters available
Powered via USB connector
Support for adaptive clocking
All JTAG signals can be monitored, target voltage can be measured
Target power supply: 300mA with overload protection
Target interface: JTAG 20-pin
PC interface: USB 2.0
Dimensions: 100 x 53 x 27mm
Cross-platform support (runs on Windows, Linux, Mac OS X)
Supported by all major IDEs
Software Developer Kit (SDK) available
Free software updates, 1 year of support
Target Adapters & Adapter Cables
131-1325
J-Link Target Power Supply Adapter
131-1326
J-Link 10-pin Needle Adapter
131-1327
J-Link RX100/200/600 MCU Adapter
131-1328
J-Link 19-pin ARM Cortex-M MCU Adapter
131-1329
J-Link 9-pin ARM Cortex-M MCU Adapter
131-1330
J-Link 14-pin ARM 7/9/11 MCU Adapter
131-1331
J-Lin...
Popular items
8.08.90 J-Link EDU, SEGGER
J-Link EDU
J-Link
EDU
is a JTAG programming and debug probe supporting a large number of processor cores. Functionally identical to the J-Link BASE, but with limited support, it's aimed at the Education and Hobbyist market. J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others.
Supported Processors
ARM7/9/11, Cortex-A5/A7/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5
Microchip PIC32
Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N
Features
Direct download into Flash memory of most microcontrollers supported
Download speed up to 1MB/second
Supports concurrent access to CPU by multiple applications
GDB Server included: allows using J-Link remotely via TCP/IP
Supports multiple target interfaces: JTAG, SWD
Supports SWV/SWO (Serial Wire Viewer / Serial Wire Output)
Wide target voltage range: +1.2V to +3.3V, +5V tolerant
Supports JTAG chains with multiple devices
Embedded Trace Buffer (ETB) support
Various target adapters and optical isolation adapters available
Powered via USB connector
Support for adaptive clocking
All JTAG signals can be monitored, target voltage can be measured
Target power supply: 300mA with overload protection
Target interface: JTAG 20-pin
PC interface: USB 2.0
Dimensions: 100 x 53 x 27mm
Cross-platform support (runs on Windows, Linux, Mac OS X)
Supported by all major IDEs
Support via the SEGGER on-line forum: forum.segger.com
Target Adapters & Adapter Cables
131-1325
J-Link Target Power Supply Adapter
131-1326
J-Link 10-pin Needle Adapter
131-1327
J-Link RX100/200/600 MCU Adapter
131-1328
J-Link 19-pin ARM Cortex-M MCU Adapter
131-1329
J-Link 9-pin ARM Corte...
Popular items
8.06.04 J-Link 10-Pin Needle Adapter, SEGGER
J-Link 10-Pin Needle Adapter
The
J-Link 10-pin Needle Adapter
has been designed to connect a J-Link Probe to a PCB which does not have a mating connector or programming header.
Compatible Probes
J-Link BASE, J-Link PLUS, J-Link PRO, J-Link ULTRA+, J-Link EDU, Flasher ARM, Flasher Portable
Features
No additional connector required on target PCB
Very small footprint
High-reliability spring pins for secure connections
3 locating pins, so adapter cannot be connected the wrong way round
Plugs into probe 20-pin 0.1in J-Link connector
No external power supply required
Option to power the target hardware via J-Link
Popular items
8.07.00 JTAG Isolator, SEGGER
J-Link ARM JTAG Isolator Board
The
J-Link
JTAG
Isolator
can be connected between a J-Link Probe and an ARM-board with a 20-pin JTAG-ARM connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application.
Compatible Probes
J-Link BASE, J-Link PRO, J-Link ULTRA+, J-Link PLUS , Flasher Portable, Flasher ARM
Features
1kV DC optical isolation
+3.3V and +5Vdc target operation supported
Powered from probe and target
JTAG 20-pin connection with TRST, TDI, TMS, TCK, RTCK, TDO and RESET signals
Power consumption on target side: 35mA typical
JTAG frequency: Up to 4MHz
3 x LEDs: Probe Power, Target Power and Target RESET
Popular items
8.06.18 J-Link Target Supply adapter, SEGGER
J-Link Target Supply Adapter
The
J-Link Target Supply Adapter
provides an adjustable power supply to a target board.
Compatible Probes
J-Link BASE, J-Link PRO, J-Link ULTRA+, J-Link PLUS , Flasher Portable, Flasher ARM
Features
MCP1826T LDO voltage regulator
Input from J-Link probe via 20-pin 0.1in socket
Output to Target via 20-pin 0.1in header
Default output: +3.3V @ 400mA
Output voltage adjustable from +1.0V @ 150mA to +3.6V @ 400mA by changing resistor
Power On LED
Popular items
8.06.01 J-Link RX Adapter, SEGGER
J-Link RX Adapter
The
J-Link RX Adapter
maps from the J-Link 20-pin 0.1in connector to the 14-pin 0.1in Renesas connector and allows JTAG + FINE connections to Renesas RX family microcontroller devices.
Supported Processors
Connect via FINE: RX111/RX210/RX21A/RX220
Connect via JTAG: RX610/RX621/RX62G/RX62N/RX62T/RX630/RX631/RX63N/RX63T
Features
LF33CDT +3.3V @ 500mA LDO voltage regulator
JTAG/FINE select link
Input from J-Link probe via 20-pin 0.1in socket
Output to Target via RSK 14-pin header
New Items
New items
8.12.00 J-Link PRO, SEGGER
J-Link PRO Probe
J-Link PRO
is a JTAG/SWD programming and debug probe supporting a large number of processor cores and comes with integrated licenses for unlimited breakpoints in Flash memory, RDI/RDDI, GDB Server and J-Flash. An Ethernet connection allows use of the debug probe far away from the PC, over a hard-wired or wireless network.
Supported Processors
ARM7/9/11, Cortex-A5/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5
Microchip PIC32
Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N
Features
Direct download into Flash memory of most microcontrollers supported
Download speed up to 3MB/sec
10/100 Ethernet via RJ45 socket
Web interface for easy TCP/IP configuration (built-in webserver)
Supports concurrent access to CPU by multiple applications
Automatic core recognition
Supports multiple target interfaces: JTAG, SWD
Supports SWD/SWV (Serial Wire Debug / Serial Wire Viewer)
Supports J-Flash Production Flash programming
Maximum target interface speed: 50MHz
Maximum SWO sampling speed: 100MHz
Wide target voltage range: +1.2V to +5Vdc
Embedded Trace Buffer (ETB) support
Various target adapters and optical isolation adapters available
RDI / RDDI interface
Powered via USB connector
Support for adaptive clocking
All JTAG signals can be monitored, target voltage can be measured
Target power supply: 300mA with overload protection
Target interface: JTAG/SWD 20-pin
PC interface: USB 2.0 HS or Ethernet RJ45 socket
Galvanic isolation from host system via Ethernet
Power and RESET LEDs
Dimensions: 100 x 53 x 27mm
Cross-platform support (runs on Windows, Linux, Mac OS X)
Memory viewer (J-Mem) included
Software Developer Kit (SDK) available
Free software updates, 2 years of support
Target Adapters & Adapter Cables
131-1325
J-Link Target Power Supply Adapter
131-1326
J-Link 1...
New items
8.06.00 J-Link 19-Pin Cortex M Adapter, SEGGER
J-Link 19-Pin Cortex-M Adapter
The
J-Link 19-pin Cortex-M Adapter
allows JTAG, SWD and SWO connections between J-Link and ARM Cortex-M based target hardware systems.
Supported Probes
J-Link BASE, J-Link PLUS, J-Link PRO, J-Link ULTRA+, J-Link EDU, Flasher ARM, Flasher Portable
Features
Input from J-Link probe via 20-pin 0.1in socket
Output to Target via 19-pin 0.05in Samtec FTSH connector
TRST can be connected to pin 9 of the Cortex-M adapter if required
New items
8.18.00 J-Trace PRO for Cortex M, SEGGER
J-Trace PRO Probe
J-Trace PRO for Cortex-M
enables continuous streaming trace via its Gigabit Ethernet interface, lifting the limitations of internal buffers and slow data transmission. J-Trace PRO can capture complete traces over long periods - thereby enabling the recording of infrequent, hard-to-reproduce bugs. It also offers extended trace features, such as code coverage and execution profiling.
Supported Processors
ARM Cortex-M0/M0+/M1/M3/M4/M7
Features
Supports Streaming Trace (trace data sent to PC/debugger in real time, unlimited trace buffer)
Full J-Link functionality
Gigabit Ethernet interface via RJ45 socket
USB 2.0 HS interface (480MBit/s)
Target interface: JTAG/SWD 20-pin, JTAG/SWD + Trace 19-pin
JTAG speed: 50MHz
Supports Cortex-M devices up to 150MHz ETM trace clock (300MHz CPU clock)
Supports ARM Embedded Trace Macrocell (ETM)
Supports ARM Embedded Trace Buffer (ETB)
Supports ARM Micro Trace Buffer (MTB)
64MB on-board trace buffer for legacy one-shot tracing mode
Dimensions: 123 x 68 x 30mm
Free software updates, 2 years of support
Supplied with
Ethernet cable, USB cable, 0.05in 20-pin ribbon trace cable, 0.1in 20-pin ribbon cable
New items
8.06.02 J-Link 9-Pin Cortex M Adapter, SEGGER
J-Link 9-Pin Cortex-M Adapter
The
J-Link 9-pin Cortex-M Adapter
allows JTAG, SWD and SWO connections between J-Link and ARM Cortex-M based target hardware systems.
Supported Probes
J-Link BASE, J-Link PLUS, J-Link PRO, J-Link ULTRA+, J-Link EDU, Flasher ARM, Flasher Portable
Features
Input from J-Link probe via 20-pin 0.1in socket
Output to Target via 9-pin 0.05in Samtec FTSH connector
TRST can be connected to pin 9 of the Cortex-M adapter if required
New items
5.09.01 Flasher STM8, SEGGER
Flasher STM8 Programmer
Flasher STM8
programmer for STM8x series of microcontrollers with on-chip Flash memory.
Supported Processors
STMicroelectronics STM8S/STM8L/STM8AF/STM8AL
Features
Integrated optical isolation between host and target system
Target interface: 4-pin SWIM connector
Host interface: USB 2.0 or RS-232 DE9 connector
10/100 Ethernet via RJ45 connector
Target voltage can be measured & monitored during program run
Target power supply via pin 1 of 4-pin interface (up to 300mA with overload protection)
Windows PC software included
ASCII command interface to control Flasher without PC program
Free software updates, 2 years of support
Supplied with
Ethernet cable, 4-pin target ribbon cable, RS-232 serial cable, USB cable
New items
8.07.02 USB Isolator, SEGGER
J-Link USB Isolator Board
The
J-Link
USB
Isolator
may be connected in a J-Link Probe to Host PC USB link to provide electrical isolation. This is essential when development tools are not connected to the same ground as the application.
Compatible Probes
All J-Link tools and production programmers that use USB
Features
3kV DC transformer isolation for 1sec
Propagation delay: Maximum 70ns
Maximum 200mA VBus current to J-Link Probe
USB 2.0 FS capable
Short-circuit protection
Host connection: mini-USB
J-Link connection: USB-A
2 x LEDs: VBus Power On and VBus Overload
New items
8.08.00 J-LINK BASE, SEGGER
J-Link BASE Probe
J-Link BASE
is a JTAG programming and debug probe supporting a large number of processor cores. J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others.
Supported Processors
ARM7/9/11, Cortex-A5/A7/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5
Microchip PIC32
Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N
Features
Direct download into Flash memory of most microcontrollers supported
Download speed up to 1MB/second
Supports unlimited breakpoints in Flash memory
Supports breakpoints in external Flash memory of Cortex-M systems
Supports concurrent access to CPU by multiple applications
GDB Server included: allows using J-Link remotely via TCP/IP
Supports multiple target interfaces: JTAG, SWD
Supports SWV/SWO (Serial Wire Viewer / Serial Wire Output)
Wide target voltage range: +1.2V to +3.3V, +5V tolerant
Supports JTAG chains with multiple devices
Embedded Trace Buffer (ETB) support
Various target adapters and optical isolation adapters available
Powered via USB connector
Support for adaptive clocking
All JTAG signals can be monitored, target voltage can be measured
Target power supply: 300mA with overload protection
Target interface: JTAG 20-pin
PC interface: USB 2.0
Dimensions: 100 x 53 x 27mm
Cross-platform support (runs on Windows, Linux, Mac OS X)
Supported by all major IDEs
Software Developer Kit (SDK) available
Free software updates, 1 year of support
Target Adapters & Adapter Cables
131-1325
J-Link Target Power Supply Adapter
131-1326
J-Link 10-pin Needle Adapter
131-1327
J-Link RX100/200/600 MCU Adapter
131-1328
J-Link 19-pin ARM Cortex-M MCU Adapter
131-1329
J-Link 9-pin ARM Cortex-M MCU Adapter
131-1330
J-Link 14-pin ARM 7/9/11 MCU Adapter
131-1331
J-Lin...
New items
8.08.90 J-Link EDU, SEGGER
J-Link EDU
J-Link
EDU
is a JTAG programming and debug probe supporting a large number of processor cores. Functionally identical to the J-Link BASE, but with limited support, it's aimed at the Education and Hobbyist market. J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others.
Supported Processors
ARM7/9/11, Cortex-A5/A7/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5
Microchip PIC32
Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N
Features
Direct download into Flash memory of most microcontrollers supported
Download speed up to 1MB/second
Supports concurrent access to CPU by multiple applications
GDB Server included: allows using J-Link remotely via TCP/IP
Supports multiple target interfaces: JTAG, SWD
Supports SWV/SWO (Serial Wire Viewer / Serial Wire Output)
Wide target voltage range: +1.2V to +3.3V, +5V tolerant
Supports JTAG chains with multiple devices
Embedded Trace Buffer (ETB) support
Various target adapters and optical isolation adapters available
Powered via USB connector
Support for adaptive clocking
All JTAG signals can be monitored, target voltage can be measured
Target power supply: 300mA with overload protection
Target interface: JTAG 20-pin
PC interface: USB 2.0
Dimensions: 100 x 53 x 27mm
Cross-platform support (runs on Windows, Linux, Mac OS X)
Supported by all major IDEs
Support via the SEGGER on-line forum: forum.segger.com
Target Adapters & Adapter Cables
131-1325
J-Link Target Power Supply Adapter
131-1326
J-Link 10-pin Needle Adapter
131-1327
J-Link RX100/200/600 MCU Adapter
131-1328
J-Link 19-pin ARM Cortex-M MCU Adapter
131-1329
J-Link 9-pin ARM Corte...
New items
8.06.04 J-Link 10-Pin Needle Adapter, SEGGER
J-Link 10-Pin Needle Adapter
The
J-Link 10-pin Needle Adapter
has been designed to connect a J-Link Probe to a PCB which does not have a mating connector or programming header.
Compatible Probes
J-Link BASE, J-Link PLUS, J-Link PRO, J-Link ULTRA+, J-Link EDU, Flasher ARM, Flasher Portable
Features
No additional connector required on target PCB
Very small footprint
High-reliability spring pins for secure connections
3 locating pins, so adapter cannot be connected the wrong way round
Plugs into probe 20-pin 0.1in J-Link connector
No external power supply required
Option to power the target hardware via J-Link
New items
8.07.00 JTAG Isolator, SEGGER
J-Link ARM JTAG Isolator Board
The
J-Link
JTAG
Isolator
can be connected between a J-Link Probe and an ARM-board with a 20-pin JTAG-ARM connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application.
Compatible Probes
J-Link BASE, J-Link PRO, J-Link ULTRA+, J-Link PLUS , Flasher Portable, Flasher ARM
Features
1kV DC optical isolation
+3.3V and +5Vdc target operation supported
Powered from probe and target
JTAG 20-pin connection with TRST, TDI, TMS, TCK, RTCK, TDO and RESET signals
Power consumption on target side: 35mA typical
JTAG frequency: Up to 4MHz
3 x LEDs: Probe Power, Target Power and Target RESET
New items
8.06.18 J-Link Target Supply adapter, SEGGER
J-Link Target Supply Adapter
The
J-Link Target Supply Adapter
provides an adjustable power supply to a target board.
Compatible Probes
J-Link BASE, J-Link PRO, J-Link ULTRA+, J-Link PLUS , Flasher Portable, Flasher ARM
Features
MCP1826T LDO voltage regulator
Input from J-Link probe via 20-pin 0.1in socket
Output to Target via 20-pin 0.1in header
Default output: +3.3V @ 400mA
Output voltage adjustable from +1.0V @ 150mA to +3.6V @ 400mA by changing resistor
Power On LED
New items
8.06.01 J-Link RX Adapter, SEGGER
J-Link RX Adapter
The
J-Link RX Adapter
maps from the J-Link 20-pin 0.1in connector to the 14-pin 0.1in Renesas connector and allows JTAG + FINE connections to Renesas RX family microcontroller devices.
Supported Processors
Connect via FINE: RX111/RX210/RX21A/RX220
Connect via JTAG: RX610/RX621/RX62G/RX62N/RX62T/RX630/RX631/RX63N/RX63T
Features
LF33CDT +3.3V @ 500mA LDO voltage regulator
JTAG/FINE select link
Input from J-Link probe via 20-pin 0.1in socket
Output to Target via RSK 14-pin header
Don’t hesitate to ask questions for better clarification.