Differential Probes SI 9010/9110/9101 Supplied with   Probe, 4 x AA batteries, instructions (also supplied with 9101: mains adapter and storage case) Testec oscilloscope probes The Testec is an active differential oscilloscope probe that enables a conventional oscilloscope to display and measure in-circuit waveforms that are referenced to high common-mode voltages. It is capable of safely measuring differential voltages up to ±2500V AC and 7000VAC/DC. It supports bandwidths up to 70MHz. Supplied with: Probe, 4 x AA batteries, instructions (also supplied with 9101: mains adapter and storage case) Features and Benefits • Bandwidth is DC to 70MHz • Attenuation is 1:100/1:1000 • Rise time is 5ns • Differential mode input voltage is 1:100 ±700V (DC+peak AC) or 700Vrms 1:1000 ±7000V (DC+peak AC) or 5000Vrms • Input impedance is 10Mohm ll10pF each side to ground • Common mode voltage range is 1:100 and 1:1000 ±7000V (DC+peak AC) or 2500Vrms • Non-destructive max. input voltage is 1:100 and 1:1000 ±7000V (DC+peak AC) or 2500Vrms • CMRR (typical) is -80dB at 50Hz and -60dB at 20kHz • Offset (typical) is • Noise (typical) is 0.9mVRMS Applications • Performance conversion • Inverters • Motor speed indicators • Switch mode power supplies Certifications • CAT I 2500 VAC • CAT II 7000 VAC/DC

Differential Probes SI 9010/9110/9101 Supplied with   Probe, 4 x AA batteries, instructions (also supplied with 9101: mains adapter and storage case) Testec oscilloscope probes The Testec is an active differential oscilloscope probe that enables a conventional oscilloscope to display and measure in-circuit waveforms that are referenced to high common-mode voltages. It is capable of safely measuring differential voltages up to ±1000V AC. It supports bandwidths up to 100MHz. Supplied with: • Probe • 4 x AA batteries • Instructions (also supplied with 9101: mains adapter and storage case) Features and Benefits • Bandwidth is DC to 100MHz • Attenuation is 1:10/1:100 • Rise time is 3.5ns • Differential mode input voltage is 1:10 ±70V (DC+peak AC) or 70Vrms 1:100 ±700V (DC+peak AC) or 700Vrms • Input impedance is 4Mohm ll7pF each side to ground • Common mode voltage range is 1:10 ±700V (DC + peak AC) or 700Vrms 1:100 ±700V (DC + peak AC) or 700Vrms • Non-destructive Max input voltage is 1:10 ±1000V (DC+peak AC) or 1000Vrms 1:100 ±1400V (DC+peak AC) or 1000Vrms • CMRR (typical) is -85dB at 50Hz and -55dB at 1MHz • Offset (typical) is • Noise (typical) is 0.9mVRMS Applications • Performance conversion • Inverters • Motor speed indicators • Switch mode power supplies Certifications • CAT III 1000VAC

Differential Probes SI 9010/9110/9101 Supplied with   Probe, 4 x AA batteries, instructions (also supplied with 9101: mains adapter and storage case) Testec oscilloscope probes The Testec is an active differential oscilloscope probe that enables a conventional oscilloscope to display and measure in-circuit waveforms that are referenced to high common-mode voltages. It is capable of safely measuring differential voltages up to ±2500V AC and 7000VAC/DC. It supports bandwidths up to 70MHz. Supplied with: Probe, 4 x AA batteries, instructions (also supplied with 9101: mains adapter and storage case) Features and Benefits • Bandwidth is DC to 70MHz • Attenuation is 1:100/1:1000 • Rise time is 5ns • Differential mode input voltage is 1:100 ±700V (DC+peak AC) or 700Vrms 1:1000 ±7000V (DC+peak AC) or 5000Vrms • Input impedance is 10Mohm ll10pF each side to ground • Common mode voltage range is 1:100 and 1:1000 ±7000V (DC+peak AC) or 2500Vrms • Non-destructive max. input voltage is 1:100 and 1:1000 ±7000V (DC+peak AC) or 2500Vrms • CMRR (typical) is -80dB at 50Hz and -60dB at 20kHz • Offset (typical) is • Noise (typical) is 0.9mVRMS Applications • Performance conversion • Inverters • Motor speed indicators • Switch mode power supplies Certifications • CAT I 2500 VAC • CAT II 7000 VAC/DC

Differential Probes SI 9010/9110/9101 Supplied with   Probe, 4 x AA batteries, instructions (also supplied with 9101: mains adapter and storage case) Testec oscilloscope probes The Testec is an active differential oscilloscope probe that enables a conventional oscilloscope to display and measure in-circuit waveforms that are referenced to high common-mode voltages. It is capable of safely measuring differential voltages up to ±1000V AC. It supports bandwidths up to 100MHz. Supplied with: • Probe • 4 x AA batteries • Instructions (also supplied with 9101: mains adapter and storage case) Features and Benefits • Bandwidth is DC to 100MHz • Attenuation is 1:10/1:100 • Rise time is 3.5ns • Differential mode input voltage is 1:10 ±70V (DC+peak AC) or 70Vrms 1:100 ±700V (DC+peak AC) or 700Vrms • Input impedance is 4Mohm ll7pF each side to ground • Common mode voltage range is 1:10 ±700V (DC + peak AC) or 700Vrms 1:100 ±700V (DC + peak AC) or 700Vrms • Non-destructive Max input voltage is 1:10 ±1000V (DC+peak AC) or 1000Vrms 1:100 ±1400V (DC+peak AC) or 1000Vrms • CMRR (typical) is -85dB at 50Hz and -55dB at 1MHz • Offset (typical) is • Noise (typical) is 0.9mVRMS Applications • Performance conversion • Inverters • Motor speed indicators • Switch mode power supplies Certifications • CAT III 1000VAC