Featured Products
APM10 - kW-Transmitter The APM10 is a monitor- and protection unit for motors. The unit converts kW into an analogu...
APM110E - Analogue Motor Load Monitor The APM110E is a monitor- and protection unit for motors. The unit measures k...
APM110 - Analogue Motor Load Monitor The APM110 is a monitor- and protection unit for motors. The unit measures kW...
APM382 - Analogue Load Monitor The APM382 is a combined electronic power measurement transducer and load monitor th...
Popular Categories For Unipower
Popular Items
Popular items
APM10, Unipower
APM10 - kW-Transmitter
The APM10 is a monitor- and protection unit for motors. The unit converts kW into an analogue process signal for use in PLC's and other controllers.
Transmitter for kW, 3 phase symmetrical load
For connecting to a 3 phase net of up to 3x500 Vac
Internal Current Transformer
Input Current Range 5, 10, 20, 25, 40, 60 Aac
24 V Power Supply
Analogue output 0(4)-20mA or 0(2)-10V
DIP switch settings for output signal
Galvanic insulation between input and output
Test Voltage 3 kV
Unipower Motor Protection
Popular items
APM110E, Unipower
APM110E - Analogue Motor Load Monitor
The APM110E is a monitor- and protection unit for motors. The unit measures kW used by a 3-phase motor to detect machine overload or under load.
Commonly used to protect pumps, conveyors, macerators, scrapers and filtration screens.
Features output connections for the PCU D10, remote front panel display and control module.
Supply voltage from 1x 120/230 Vac
Voltage range from 3x 230-575 Vac
Programmable max. and min. kW limit detector plus the support functions
Internal current transformer for currents up to 80A
Power range max. 80 kW with internal current sensor
Auto and manual reset
DIN rail mounting
An external display (PCU D10; Stock-no.:
793-4111
) can be connect via 2-wire connection
Unipower Motor Protection
Popular items
APM110, Unipower
APM110 - Analogue Motor Load Monitor
The APM110 is a monitor- and protection unit for motors. The unit measures kW used by a 3-phase motor to detect machine overload or under load.
Commonly used to protect pumps, conveyors, macerators, scrapers and filtration screens.
Supply and voltage range from 3x 380-500 Vac
Programmable max. and min. kW limit detector plus the support functions
Internal current transformer for currents up to 80A
Power range max. 70 kW with internal current sensor
Auto and manual reset
DIN rail mounting
Unipower Motor Protection
Popular items
APM382, Unipower
APM382 - Analogue Load Monitor
The APM382 is a combined electronic power measurement transducer and load monitor that measures power in kW on 3-phased asymmetric loads, including frequency inverter.
Measures after frequency inverters; PWM 10Hz - 1kHz
10 current measuring ranges up to 80A internally
Digital scaling of the selected range (Zoom)
Programmable filter function (analogue and digital)
2 independent alarm limits plus dP/dt (shock load) alarm
Alarm inhibit inputs and external reset input
0(4)-20mA and 0(2)-10V analogue outputs
Galvanic isolation between mains net and I/O
Setup of parameters via PC with software 382Mon
Optocoupled alarm outputs
An external display (DCU D382; Stock-no.:
793-4124
) can be connect
Unipower Motor Protection
New Items
New items
APM10, Unipower
APM10 - kW-Transmitter
The APM10 is a monitor- and protection unit for motors. The unit converts kW into an analogue process signal for use in PLC's and other controllers.
Transmitter for kW, 3 phase symmetrical load
For connecting to a 3 phase net of up to 3x500 Vac
Internal Current Transformer
Input Current Range 5, 10, 20, 25, 40, 60 Aac
24 V Power Supply
Analogue output 0(4)-20mA or 0(2)-10V
DIP switch settings for output signal
Galvanic insulation between input and output
Test Voltage 3 kV
Unipower Motor Protection
New items
APM110E, Unipower
APM110E - Analogue Motor Load Monitor
The APM110E is a monitor- and protection unit for motors. The unit measures kW used by a 3-phase motor to detect machine overload or under load.
Commonly used to protect pumps, conveyors, macerators, scrapers and filtration screens.
Features output connections for the PCU D10, remote front panel display and control module.
Supply voltage from 1x 120/230 Vac
Voltage range from 3x 230-575 Vac
Programmable max. and min. kW limit detector plus the support functions
Internal current transformer for currents up to 80A
Power range max. 80 kW with internal current sensor
Auto and manual reset
DIN rail mounting
An external display (PCU D10; Stock-no.:
793-4111
) can be connect via 2-wire connection
Unipower Motor Protection
New items
APM110, Unipower
APM110 - Analogue Motor Load Monitor
The APM110 is a monitor- and protection unit for motors. The unit measures kW used by a 3-phase motor to detect machine overload or under load.
Commonly used to protect pumps, conveyors, macerators, scrapers and filtration screens.
Supply and voltage range from 3x 380-500 Vac
Programmable max. and min. kW limit detector plus the support functions
Internal current transformer for currents up to 80A
Power range max. 70 kW with internal current sensor
Auto and manual reset
DIN rail mounting
Unipower Motor Protection
New items
APM382, Unipower
APM382 - Analogue Load Monitor
The APM382 is a combined electronic power measurement transducer and load monitor that measures power in kW on 3-phased asymmetric loads, including frequency inverter.
Measures after frequency inverters; PWM 10Hz - 1kHz
10 current measuring ranges up to 80A internally
Digital scaling of the selected range (Zoom)
Programmable filter function (analogue and digital)
2 independent alarm limits plus dP/dt (shock load) alarm
Alarm inhibit inputs and external reset input
0(4)-20mA and 0(2)-10V analogue outputs
Galvanic isolation between mains net and I/O
Setup of parameters via PC with software 382Mon
Optocoupled alarm outputs
An external display (DCU D382; Stock-no.:
793-4124
) can be connect
Unipower Motor Protection
Don’t hesitate to ask questions for better clarification.