Featured Products
Wago I/O system digital inputs 4 PNP digital input module. Easy to identify by yellow codes. Spring terminal connec...
Mini feed-through connections for TS 35 rails Mini feed-through connections for mounting on TS 35 type DIN rails an...
Shielded Clamping Screw and Accessories Shielded clamping screw to directly contact shielded wires and busbars Tran...
862 Series For fixing screws 3mm Ø or for self tapping screw 2.9mm Ø from the top without marking Offset 10-11mm 4...
222 Series Terminal Blocks The component in this series offers an all-rounder connection solution for solid, strand...
Micro Push-Wire Connector Micro push-wire connectors for junction boxes. Features and Benefits...
Mini feed-through connections for TS 35 rails Mini feed-through connections for mounting on TS 35 type DIN rails an...
Wago MODBUS Fieldbus Coupler The Wago Modbus Fieldbus coupler, RS 485/1,2 - 115,2k Baud allows connection of the WA...
Wago PLC I/O Module The Wago 230VDC PLC I/O module has 2 relay output channels that provide with 2.0A current. This...
Wago PLC I/O Module The Wago PLC I/O is a 4-channel analogue inputs module. It has analogue input terminals for con...
Couplers series 750 Wago I/O system Range of couplers for analogue and digital signals. Enables I/O connection to v...
Wago CANopen Connector The Wago CANopen connector is an innovation that links a CANopen device to a CANopen line It...
Popular Categories For Wago
Popular Items
Popular items
750402, Wago
Wago I/O system digital inputs
4 PNP digital input module.
Easy to identify by yellow codes.
Spring terminal connection.
Wago I/O system range
Remote I/O modular system for all functions.
Makes it easier to connect all I/Os thanks to its Cage clamp system®
Communication with PC, PLCs thanks to the various communication protocols.
Colour codes according to type of signal.
Do not forget to order the end module (
508-3959
)
Popular items
264-711, Wago
Mini feed-through connections for TS 35 rails
Mini feed-through connections for mounting on TS 35 type DIN rails and designed to fit into small enclosures.
Two versions of these terminals are available, for 2 or 4 conductors.
Popular items
790-108, Wago
Shielded Clamping Screw and Accessories
Shielded clamping screw to directly contact shielded wires and busbars
Transport rails 1000 mm long, tin-coated
Distancing sleeve prevents buckling while fixing the transport rails (compatible with M5 screws)
Insulated holding block for busbars with M4 x 8 mm screen for common shielding potential
Popular items
862-1505, Wago
862 Series
For fixing screws 3mm Ø or for self tapping screw 2.9mm Ø from the top without marking
Offset 10-11mm
4 conductor device connector
Available in 2, 3, 4 and 5 pole configurations
Popular items
222-413, Wago
222 Series Terminal Blocks
The component in this series offers an all-rounder connection solution for solid, stranded and fine-stranded conductors with different cross sections. Ensuring practical, fast and safe connections for different types and sizes of wiring or conductors.
Features & Benefits
Fast and safe connecting
No tools needed
Product Application Information
Fast and safe connections for mains power or automotive wiring such as light fixtures, speakers and gates.
222 Series Wago Connectors
The 222 series Wago connectors offer a tool free and compact solution for connecting assembled terminal blocks. The connection of up to three stripped fine stranded conductors up to 2.5 mm². The integrated orange lever acts as a sturdy clamp when in the rest position, preventing a connected conductor accidentally become loose or damaged, making them a really handy for free wiring.
9 mm to 10 mm stripped length
Side entry wiring of up to 3 connection points
32A Current Rating, 600 V measured voltage
Cutting guide underneath for stripping off insulation on wires.
2.5 mm² max cross section
Product Application
These handy electronics are the clever and super easy alternative to wire nuts electricians use to bind wires together. No screw drivers required. Ideal for looping light fittings and splitting off circuits.
You can also use them for mains wiring from 12AWG down to 28 AWG.
Approvals
ENEC, UL
Popular items
243-208, Wago
Micro Push-Wire Connector
Micro push-wire connectors for junction boxes.
Features and Benefits
Recommended insulation stripping length 5 to 6 mm
8 conductor connectors
Popular items
264-737, Wago
Mini feed-through connections for TS 35 rails
Mini feed-through connections for mounting on TS 35 type DIN rails and designed to fit into small enclosures.
Two versions of these terminals are available, for 2 or 4 conductors.
Popular items
750315, Wago
Wago MODBUS Fieldbus Coupler
The Wago Modbus Fieldbus coupler, RS 485/1,2 - 115,2k Baud allows connection of the WAGO-I/O-SYSTEM as a slave to the MODBUS or Fieldbus. It recognizes all the connected I/O modules and creates a local process image on this basis. Analogue and speciality module data is sent via words and/or bytes, digital data is sent bit by bit. It allows the storage of the process image in the corresponding Master control (PLC, PC or NC).
Couplers series 750 Wago I/O system
Range of couplers for analogue and digital signals
Enables I/O connection to various protocols Modbus, Ethernet, Profibus and Interbus
Configuration simplified with switches or rotary encoders
The joint should be connected to the end of the loop, to guarantee the correct transmission of the data and enable the whole assembly to function correctly
Wago I/O system range
Remote I/O modular system for all functions
Makes it easier to connect all I/Os thanks to its cage clamp system
Communication with PC, PLCs because of the various communication protocols
Colour codes according to the type of signal
Features and Benefits
DIN 35 rail, cage clamp connection
Maximum number of I/O modules is 64
DIP switch and 2 decimal coder configuration
Voltage supply is 24VDC
Input current maximum is 500mA at 24V
Isolation is 500V system/supply
Operating temperature ranges between 0°C and 55°C
Certifications
IP20 rated
CE EN 50082-2 (1996), EN 50081-1 (1993)
cULus approved
IEC 60068-2-6
IEC 60068-2-27
Popular items
750513, Wago
Wago PLC I/O Module
The Wago 230VDC PLC I/O module has 2 relay output channels that provide with 2.0A current. This digital output module transmits control signals from the automation device to the connected actuators. It has an internal system voltage that triggers the relay. The NO configuration contacts are electrically isolated. The module is compatible with 750 series PLCs.
Features and Benefits
TOR digital output terminals
Fast cage clamp connection system
Electrical supply through the coupler
Easy identification by red colour coding
Operating temperature ranges between 0°C and 55°C
Certifications
CE
IP20 rated
IEC 61131-2
UL 121201
IEC 60079-0
EN 60079-0
Popular items
750461, Wago
Wago PLC I/O Module
The Wago PLC I/O is a 4-channel analogue inputs module. It has analogue input terminals for connecting temperature sensors with inputs ranging between 4mA and 20mA. This module automatically linearizes the entire temperature range. It also indicates a sensor error by a red LED. A green LED indicates readiness for operation and error-free communication with the bus coupler. The screen is directly connected to the DIN rail. The module is compatible with 750 series PLCs.
Features and Benefits
Error indication by LED
Input module directly connects to Pt resistance sensors
Measuring error ranges between0.5K and 3.0K
Operating temperature ranges between 0°C and 55°C
Certifications
CE
IP20 rated
IEC 61131-2
UL 121201
IEC 60079-0
EN 60079-0
Popular items
750600, Wago
Couplers series 750 Wago I/O system
Range of couplers for analogue and digital signals.
Enables I/O connection to various protocols Modbus, Ethernet, Profibus and Interbus.
Configuration simplified with switches or rotary encoders.
The joint should be connected to the end of the loop, to guarantee correct transmission of the data and enable the whole assembly to function correctly.
Wago I/O system range
Remote I/O modular system for all functions.
Makes it easier to connect all I/Os thanks to its Cage clamp system®
Communication with PC, PLCs thanks to the various communication protocols.
Colour codes according to type of signal.
Do not forget to order the end module (
508-3959
)
Popular items
750963, Wago
Wago CANopen Connector
The Wago CANopen connector is an innovation that links a CANopen device to a CANopen line It has Buchse D-Sub 9 female connector.
BUS connectors:
Rewireable bus interface connectors are suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus), and Profibus systems. Compact and high quality, the 9-poles sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories.
Available in versions with horizontal or vertical cable outlets
Fast and reliable connection via screw terminals on the PCB
Bus terminations include SMT termination resistors
Colour-coded bodies aid installation and repair
Safe ESD protection thanks to fully insulated housings
Supplied with reliable crimp strain relief
Features and Benefits
Two horizontal cable entries: one input and one output
Fast and maintenance‐free cage clamp connection can be held in the open position with the help of an actuation slide mechanism
Externally operable switch to activate and/or deactivate the network terminating resistor
Enables the quick, easy connection of incoming and outgoing bus lines
Baud rate:1Mbit/s
Supply voltage: 4.75VDC to 5.25VDC
Operating temperature ranges between 0°C and 60°C
Certifications
IP20 rated
IEC 60068-2-6
cULus 508 approved
TUV certified
EN 60079-0
IEC 60079-0
New Items
New items
750402, Wago
Wago I/O system digital inputs
4 PNP digital input module.
Easy to identify by yellow codes.
Spring terminal connection.
Wago I/O system range
Remote I/O modular system for all functions.
Makes it easier to connect all I/Os thanks to its Cage clamp system®
Communication with PC, PLCs thanks to the various communication protocols.
Colour codes according to type of signal.
Do not forget to order the end module (
508-3959
)
New items
264-711, Wago
Mini feed-through connections for TS 35 rails
Mini feed-through connections for mounting on TS 35 type DIN rails and designed to fit into small enclosures.
Two versions of these terminals are available, for 2 or 4 conductors.
New items
790-108, Wago
Shielded Clamping Screw and Accessories
Shielded clamping screw to directly contact shielded wires and busbars
Transport rails 1000 mm long, tin-coated
Distancing sleeve prevents buckling while fixing the transport rails (compatible with M5 screws)
Insulated holding block for busbars with M4 x 8 mm screen for common shielding potential
New items
862-1505, Wago
862 Series
For fixing screws 3mm Ø or for self tapping screw 2.9mm Ø from the top without marking
Offset 10-11mm
4 conductor device connector
Available in 2, 3, 4 and 5 pole configurations
New items
222-413, Wago
222 Series Terminal Blocks
The component in this series offers an all-rounder connection solution for solid, stranded and fine-stranded conductors with different cross sections. Ensuring practical, fast and safe connections for different types and sizes of wiring or conductors.
Features & Benefits
Fast and safe connecting
No tools needed
Product Application Information
Fast and safe connections for mains power or automotive wiring such as light fixtures, speakers and gates.
222 Series Wago Connectors
The 222 series Wago connectors offer a tool free and compact solution for connecting assembled terminal blocks. The connection of up to three stripped fine stranded conductors up to 2.5 mm². The integrated orange lever acts as a sturdy clamp when in the rest position, preventing a connected conductor accidentally become loose or damaged, making them a really handy for free wiring.
9 mm to 10 mm stripped length
Side entry wiring of up to 3 connection points
32A Current Rating, 600 V measured voltage
Cutting guide underneath for stripping off insulation on wires.
2.5 mm² max cross section
Product Application
These handy electronics are the clever and super easy alternative to wire nuts electricians use to bind wires together. No screw drivers required. Ideal for looping light fittings and splitting off circuits.
You can also use them for mains wiring from 12AWG down to 28 AWG.
Approvals
ENEC, UL
New items
243-208, Wago
Micro Push-Wire Connector
Micro push-wire connectors for junction boxes.
Features and Benefits
Recommended insulation stripping length 5 to 6 mm
8 conductor connectors
New items
264-737, Wago
Mini feed-through connections for TS 35 rails
Mini feed-through connections for mounting on TS 35 type DIN rails and designed to fit into small enclosures.
Two versions of these terminals are available, for 2 or 4 conductors.
New items
750315, Wago
Wago MODBUS Fieldbus Coupler
The Wago Modbus Fieldbus coupler, RS 485/1,2 - 115,2k Baud allows connection of the WAGO-I/O-SYSTEM as a slave to the MODBUS or Fieldbus. It recognizes all the connected I/O modules and creates a local process image on this basis. Analogue and speciality module data is sent via words and/or bytes, digital data is sent bit by bit. It allows the storage of the process image in the corresponding Master control (PLC, PC or NC).
Couplers series 750 Wago I/O system
Range of couplers for analogue and digital signals
Enables I/O connection to various protocols Modbus, Ethernet, Profibus and Interbus
Configuration simplified with switches or rotary encoders
The joint should be connected to the end of the loop, to guarantee the correct transmission of the data and enable the whole assembly to function correctly
Wago I/O system range
Remote I/O modular system for all functions
Makes it easier to connect all I/Os thanks to its cage clamp system
Communication with PC, PLCs because of the various communication protocols
Colour codes according to the type of signal
Features and Benefits
DIN 35 rail, cage clamp connection
Maximum number of I/O modules is 64
DIP switch and 2 decimal coder configuration
Voltage supply is 24VDC
Input current maximum is 500mA at 24V
Isolation is 500V system/supply
Operating temperature ranges between 0°C and 55°C
Certifications
IP20 rated
CE EN 50082-2 (1996), EN 50081-1 (1993)
cULus approved
IEC 60068-2-6
IEC 60068-2-27
New items
750513, Wago
Wago PLC I/O Module
The Wago 230VDC PLC I/O module has 2 relay output channels that provide with 2.0A current. This digital output module transmits control signals from the automation device to the connected actuators. It has an internal system voltage that triggers the relay. The NO configuration contacts are electrically isolated. The module is compatible with 750 series PLCs.
Features and Benefits
TOR digital output terminals
Fast cage clamp connection system
Electrical supply through the coupler
Easy identification by red colour coding
Operating temperature ranges between 0°C and 55°C
Certifications
CE
IP20 rated
IEC 61131-2
UL 121201
IEC 60079-0
EN 60079-0
New items
750461, Wago
Wago PLC I/O Module
The Wago PLC I/O is a 4-channel analogue inputs module. It has analogue input terminals for connecting temperature sensors with inputs ranging between 4mA and 20mA. This module automatically linearizes the entire temperature range. It also indicates a sensor error by a red LED. A green LED indicates readiness for operation and error-free communication with the bus coupler. The screen is directly connected to the DIN rail. The module is compatible with 750 series PLCs.
Features and Benefits
Error indication by LED
Input module directly connects to Pt resistance sensors
Measuring error ranges between0.5K and 3.0K
Operating temperature ranges between 0°C and 55°C
Certifications
CE
IP20 rated
IEC 61131-2
UL 121201
IEC 60079-0
EN 60079-0
New items
750600, Wago
Couplers series 750 Wago I/O system
Range of couplers for analogue and digital signals.
Enables I/O connection to various protocols Modbus, Ethernet, Profibus and Interbus.
Configuration simplified with switches or rotary encoders.
The joint should be connected to the end of the loop, to guarantee correct transmission of the data and enable the whole assembly to function correctly.
Wago I/O system range
Remote I/O modular system for all functions.
Makes it easier to connect all I/Os thanks to its Cage clamp system®
Communication with PC, PLCs thanks to the various communication protocols.
Colour codes according to type of signal.
Do not forget to order the end module (
508-3959
)
New items
750963, Wago
Wago CANopen Connector
The Wago CANopen connector is an innovation that links a CANopen device to a CANopen line It has Buchse D-Sub 9 female connector.
BUS connectors:
Rewireable bus interface connectors are suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus), and Profibus systems. Compact and high quality, the 9-poles sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories.
Available in versions with horizontal or vertical cable outlets
Fast and reliable connection via screw terminals on the PCB
Bus terminations include SMT termination resistors
Colour-coded bodies aid installation and repair
Safe ESD protection thanks to fully insulated housings
Supplied with reliable crimp strain relief
Features and Benefits
Two horizontal cable entries: one input and one output
Fast and maintenance‐free cage clamp connection can be held in the open position with the help of an actuation slide mechanism
Externally operable switch to activate and/or deactivate the network terminating resistor
Enables the quick, easy connection of incoming and outgoing bus lines
Baud rate:1Mbit/s
Supply voltage: 4.75VDC to 5.25VDC
Operating temperature ranges between 0°C and 60°C
Certifications
IP20 rated
IEC 60068-2-6
cULus 508 approved
TUV certified
EN 60079-0
IEC 60079-0
Don’t hesitate to ask questions for better clarification.