Thread Lock

Loctite® SF 7414 Loctite SF 7414 torque marque is designed for you to use on all your parts where you want to see any movement. The high viscosity blue paste is an excellent choice for checking if anything has been tampered with. Features and Benefits Excellent sticking power to metals Non-corrosive Fast drying Easy to see any movement Can use outdoors Non-drip Becomes brittle after full cure so any movement is easy to see Typical Applications Use the tamper proofing paste on your nuts, studs, compression fittings and assemblies after you have set the correct position and torque. Use as a warranty seal. Loctite Thread locking Adhesive The Loctite SF 7414 torque marque is designed to use on all parts where any type of movement is required. This high viscosity blue paste is an excellent choice for checking if anything has tampered. It is a fast-drying paste to use in production to visually detect any movement in the adjustment of parts. LOCTITE® SF 7414™ is developed for use on compression fittings, studs, nuts, parts and assemblies after they have been set to proper tension or position. Service personnel or inspectors can quickly spot any changes or tampering with equipment. It has excellent adhesion to metals, including aluminium, magnesium, titanium, stainless steel and copper, and is non-corrosive to these metals. This product should be typically applied in temperatures between 15 and 25°C, higher temperatures will reduce the drying time. Operating temperature ranges between -35°C and 145°C. Features and Benefits • Excellent sticking power to metals • Non-corrosive • Fast drying • Easy to see any movement • Can use outdoors • Non-drip ...

Loctite 2701® Threadlocking Adhesive Improved high strength threadlocking adhesive For use on all metal fasteners including stainless steels and those with protective coatings such as zinc Ideal for where regular removal for maintenance is not required Recommended for permanently locking studs on engine blocks and pump housings Alternative for Loctite 270, with improved temperature resistance Loctite Pipe & Thread Sealant Liquid The Loctite green 50 ml pipe and thread sealant green liquid are designed for permanent locking and sealing of threaded fasteners. This product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage from shock and vibration. This product is composed of methacrylate and requires no mixing. It is particularly suited for use on inactive substrates and/or where maximum resistance to hot oil is required.Supplied withMaterial Safety Data SheetThread locking and Retainers Features and Benefits High strength Low viscosity Cure time is 6 hours Steel fixture time is 10 minutes Brass fixture time is 4 minutes Stainless steel fixture time is 25 minutes Tolerates slight contaminations of industrial oils Fluoresces to allow quality control and inspection Operating temperature ranges between -55°C and 150°C Prevents unwanted movement, loosening, leaks and corrosion Resists vibration Seals threads- Allows through-hole tapping Applications Used for chromate surfaces Suitable for all the metal fasteners Certifications ANSI/ESD S20.20:2014 BS EN 61340-5-1:2007 Supplied with Material Safety Data Sheet Threadlocking and Retainers