Flow Controllers

New items

FCS-G1/4A4-AP8X-H1141, Turck

Digital Flow Control Sensor Sensor and signal processor in one stainless steel compact housing On-delay time: 8s (typical) Ingress protection to IP67 Simple adjustment via LED bar graph and potentiometer Response time: 12s max. Switch on and off times: 2s typical Output - PNP transistor; short-circuit proof; reverse polarity protected Fluid temperature range: –25 to +80°C (100°C for 10 minutes max.) M12, four-pin plug Flow rates: 1 to 150cm/s (water); 3 to 300cm/s (oil); 2 to 30m/s (air)

Product Detail

New items

AS1311FS1-M5-04, SMC

Lock speed setting, with the touch of a button It can be locked only by pushing the handle after adjustment. Convenient opening indication scale The opening indication scale for the needle valve is provided on the handle to facilitate speed adjustments. Easy speed control at low flow volume ranges Possible to control the mass velocity Constant handle constructed of metal to withstand heavy usage In addition to the standard handle made of resin, a heavy-duty metal handle is also available. Retainer prevents an accidental loss of needle

Product Detail

New items

AS3301FS1-03-08S, SMC

Lock speed setting, with the touch of a button It can be locked only by pushing the handle after adjustment. Convenient opening indication scale The opening indication scale for the needle valve is provided on the handle to facilitate speed adjustments. Easy speed control at low flow volume ranges Possible to control the mass velocity Constant handle constructed of metal to withstand heavy usage In addition to the standard handle made of resin, a heavy-duty metal handle is also available. Retainer prevents an accidental loss of needle

Product Detail

New items

IR1000-F01-A, SMC

Series IR Precision Regulators are designed to be compact and light weight. The maximum set pressure has been expanded from the conventional 0.7MPa to 0.8MPa. Relief flow has been increased by nearly 5 times (compared to SMC IR201, IR401)

Product Detail

New items

IR1020-F01-A, SMC

Series IR Precision Regulators are designed to be compact and light weight. The maximum set pressure has been expanded from the conventional 0.7MPa to 0.8MPa. Relief flow has been increased by nearly 5 times (compared to SMC IR201, IR401)

Product Detail

New items

FCS-G1/2A4-AP8X-H1141, Turck

Digital Flow Control Sensor Sensor and signal processor in one stainless steel compact housing On-delay time: 8s (typical) Ingress protection to IP67 Simple adjustment via LED bar graph and potentiometer Response time: 12s max. Switch on and off times: 2s typical Output - PNP transistor; short-circuit proof; reverse polarity protected Fluid temperature range: –25 to +80°C (100°C for 10 minutes max.) M12, four-pin plug Flow rates: 1 to 150cm/s (water); 3 to 300cm/s (oil); 2 to 30m/s (air) Turck Flow Controller Sensor The Turck flow controller sensor monitors the flow rate of gaseous and liquid media, irrespective of the viscosity and electric conductivity of the medium. Its operating measurement range of water is 1cm/s to 150cm/s and operating measurement range of oil is 3cm/s to 300cm/s. The operation is based on the heat transport/heat loss principle, that is when fluid moves over the heated sensing probe, heat is conducted away from the sensor. It is best suited for industrial use. Features and Benefits Flow control and processor incorporated in a single compact housing Simple adjustment via a potentiometer Pressure resistance is 100bar The operating temperature ranges between -20°C and 80°C Sensor and signal processor in one stainless steel compact housing On-delay time is 8 seconds (typical) Ingress protection to IP67 Simple adjustment via an LED bar graph and potentiometer Response time is 12 seconds (maximum) Switch on and off times is 2 seconds (typical) Output - PNP transistor short-circuit proof reverse polarity protected 4-pin plug Certifications Ingress protection to IP67 rated

Product Detail

New items

FCS-GL1/2A4-AP8X-H1141/D023, Turck

Digital Flow Control Sensor Sensor and signal processor in one stainless steel compact housing On-delay time: 8s (typical) Ingress protection to IP67 Simple adjustment via LED bar graph and potentiometer Response time: 12s max. Switch on and off times: 2s typical Output - PNP transistor; short-circuit proof; reverse polarity protected Fluid temperature range: –25 to +80°C (100°C for 10 minutes max.) M12, four-pin plug Flow rates: 1 to 150cm/s (water); 3 to 300cm/s (oil); 2 to 30m/s (air)

Product Detail

New items

FCS-G1/2A4P-LIX-H1141, Turck

Analogue Flow Control Sensor Sensor and signal processor in one stainless steel compact housing On-delay time: 8s (typical) Ingress protection to IP67 Simple adjustment via LED bar graph and potentiometer Output Load 500Ω max. Switch on time: 1.5s Fluid temperature range: –25 to +75°C Ingress protection to IP67 Simple adjustment via LED bar graph and potentiometer

Product Detail

New items

IR2000-F02-A, SMC

Series IR Precision Regulators are designed to be compact and light weight. The maximum set pressure has been expanded from the conventional 0.7MPa to 0.8MPa. Relief flow has been increased by nearly 5 times (compared to SMC IR201, IR401)

Product Detail

New items

AS1301FS1-M5-06, SMC

Lightweight, compact, and precision control make these speed controls the right choice for many heavy-duty applications. These speed controls are offered with in-line and elbow construction to give the widest choice to your unique application. Locking nuts are included as standard as well as simplified mounting. Thread sizes range from M3 to 2 and are available in both inch (NPT) and metric R/Rc(PT) Lock speed setting, with the touch of a button It can be locked only by pushing the handle after adjustment. Convenient opening indication scale The opening indication scale for the needle valve is provided on the handle to facilitate speed adjustments. Easy speed control at low flow volume ranges Possible to control the mass velocity Constant handle constructed of metal to withstand heavy usage In addition to the standard handle made of resin, a heavy-duty metal handle is also available. Retainer prevents an accidental loss of needle

Product Detail

New items

DFT.990.RS, Parker

Combined Liquid Flow Transducer/Transmitter Fluid passes through internal flow straighteners, to stabilize turbulence, before impacting on the vaned turbine rotor which rotates at a speed proportional to the flow rate. The rotor vanes have stainless steel tips which are detected by a sensor mounted externally to the glass tube. Model 1 Polyester body and borosilicate glass tube; acetal bearings and nitrile seal material Accuracy ±2% of indicated flow Operating temperature range 5 to 60°C (water) 80°C (oil) Port connection: 1in. BSP parallel thread Work in any plane and accept reverse flow Dimensions (mm): H100 x W42 x L196 Converts the detected pulses to a 4-20mA output signal, proportional to the flow rate Supplied calibrated to 4-100 l/min. (may be user recalibrated up to a maximum of 150 l/min. Easy to install Model 2 Gives a pulse output proportional to flow rate Ideal for use in totalising/latching applications when used with a compatible counter Supplied calibrated to 2-150 l/min. (NOT user adjustable) Parker Liquid Flow Transducer The Parker liquid flow transducer is designed to operate with most of the liquids. This transducer has an output current of 4mA to 20mA. The output signal is proportional to the flow. The fluid passes through internal flow straighteners to stabilize turbulence, before impacting the vanned turbine rotor, which rotates at a speed proportional to the flow rate. The rotor vanes have stainless steel tips, which are detected by a sensor mounted externally to the glass tube. Features and Benefits Accepts reverse flow Works in any plane Negligible pressure drop Pressures up to 10bar Affordable Simple to install For use with most liquids Factory calibrated Accuracy is ±2% Connections: 1in BSP parallel threads Applications Totalisi...

Product Detail

New items

IR3000-F03-A, SMC

Series IR Precision Regulators are designed to be compact and light weight. The maximum set pressure has been expanded from the conventional 0.7MPa to 0.8MPa. Relief flow has been increased by nearly 5 times (compared to SMC IR201, IR401)

Product Detail

New Items

FCS-G1/4A4-AP8X-H1141, Turck

AS1311FS1-M5-04, SMC

AS3301FS1-03-08S, SMC

IR1000-F01-A, SMC

IR1020-F01-A, SMC

FCS-G1/2A4-AP8X-H1141, Turck

FCS-GL1/2A4-AP8X-H1141/D023, Turck

FCS-G1/2A4P-LIX-H1141, Turck

IR2000-F02-A, SMC

AS1301FS1-M5-06, SMC

DFT.990.RS, Parker

IR3000-F03-A, SMC

FAQs