Emergency Stop Push Buttons

New items

232009, IDEM

IDEM Emergency Stop Switches The ESL-SS series of Pushbuttons from IDEM are standard duty emergency stop switches designed to provide robust emergency stop protection for machines or exposed conveyors. These round Emergency Stop Push buttons with red plastic heads are designed to be used by operators to shut down a machine, system or process. In combination with any dual channel safety monitoring controllers these switches can be used as an emergency stop devices and monitored for up to Category 4/PLe to ISO13849-1. The mounting of Emergency Stop Switches on machines and sections of plant conveyors that cannot by protected by the operators are ideal for ESL-SS series to be used. All IDEMs ESL-SS series conform to European Standard EN ISO13850 (formerly EN418) and IEC60947-5-5. They have a positive mechanical linkage between the switch contacts and the E Stop Button. The switches are mechanically latched and can then only be returned to the operational condition by pressing the reset button as required by EN ISO13850. The range of Explosion Push Button Switches can withstand sparking and flames and are IECEx and ATEX certified. These certificates describe the requirements for equipment intended for use in (potentially) hazardous areas. ATEX and IECEx both have a quality assurance system. Besides the product certification, in both cases a quality system must be set up by the manufacturer and will periodically be checked by a Notified Body. For both, the quality system is mainly based on ISO 9001 with additional requirements for the design, manufacture and testing of explosion proof products. Stock nos. 826-4413 , 826-4417 , 826-4426 & 826-4429 have button protection shroud with padlock holes for Lock Off" in maintenance situations Stock nos. 826-4426 & 826-4429 have 2-colour LED (Steady Green/Flashing Red) Standards EN 60947-5-1, EN 60947-5-5, EN 62061, UL 508, ISO 138...

Product Detail

New items

CE3T-10R-11, ABB

Emergency Stop Pushbuttons All in one emergency stop push buttons with integrated contacts, available with 30mm or 40mm actuator heads. IP69K rated for harsh environments Temperature range - 25 → + 70 °C 22.5mm hole mounting Standards EN50013, EN60947-1, EN60947-5-1 Approvals UL,CSA Supplied with Key release type supplied with 2 keys ABB Emergency Stop Button The ABB 1SFA series emergency stop pushbutton has a red mushroom style head with the diameter of 30mm. It has a double pole single throw (DPST) contact configuration. This button is made of plastic material. The button has an electrical current rating of 1A and voltage rating of 240VAC. Features and Benefits 1NC/1NO normal contact configuration Twist to reset method Non-illuminated Operating temperature ranges between -25°C and 70°C Panel cut-out diameter of 22.5mm Applications OEMs Panel builders, contractors, Industrial machines and equipment Control panels and control stations Emergency circuits, alarm and signal equipment Traction equipments Certifications EN50013 EN60947-1 EN60947-5-1 UL approved CSA certified IP66 rated IP67 rated IP69K rated ABB 22.5mm Compact Range A comprehensive range of components for the user who wants a reliable and cost-effective solution to meet their needs.

Product Detail

New items

A22NE-M-P202-C, Omron

A22E Screw Terminal Block types Increase wiring efficiency with three-row mounting of Switch Units. (with non-lighted Switch Blocks, three Units can be mounted for multiple contacts). Mounted using either open-type (fork-type) or closed-type (round-type) crimp terminals. Oil-resistant A lock plate is provided as a standard feature to ensure that the control box and switch are not easily separated. A22NE-P Push-In Plus technology The small size of the control panel is realized by conserving space and changing the direction of the wiring. Since there is no looseness in the wiring, there is a reduction in the maintenance efforts. A lock lever mechanism that can be easily operated is adopted. A maximum of up to six contact points can be combined together in the contact-point configuration. Oil-resistant. Supports high-temperature, high-pressure cleaning (pushpull models).

Product Detail

New items

A165ES, Omron

A165E Series Emergency Stop Switch The A165E series of emergency stop switches feature a modular construction that allows the switch to be separated for easy wiring but still benefit from the easy handling of a one piece unit. The direct opening mechanism of this E-stop switch has a minimum contact separation of 3mm in accordance with EN60947-5-1. Push to lock, turn to reset Direct opening mechanism with minimum contact separation of 3mm in accordance with EN60947-5-1 Safety lock mechanism prevents misuse (no tampering in accordance with EN418) Short mounting depth, less than 28.5mm below panel 30mm pushbutton head IP65 protection Blank name plate available separately, yellow vinyl chloride Standards EN418, EN60947-5-1 Approvals UL, cUL Emergency Stop Pushbutton

Product Detail

New items

LPZM1B501, Lovato

Enclosures made of aluminium alloy suitable for pushbuttons, selector switches and pilot lights Platinum and SLM series. The enclosures are supplied without any holes on the cover and on the base (no cable entry). Maximum 3 contacts for operator (with mounting adapter) mounted on the cover. Earth connection through threaded holes on the base and on the cover (screws supplied) Ambient conditions: Operating temperature: -25...+70°C Storage temperature: -40...+85°C

Product Detail

New items

1SFA619502R1071 - CE3K-10R-11, ABB

Emergency Stop Pushbuttons All in one emergency stop push buttons with integrated contacts, available with 30mm or 40mm actuator heads. IP69K rated for harsh environments Temperature range - 25 → + 70 °C 22.5mm hole mounting Standards EN50013, EN60947-1, EN60947-5-1 Approvals UL,CSA Supplied with Key release type supplied with 2 keys ABB 22.5mm Compact Range A comprehensive range of components for the user who wants a reliable and cost-effective solution to meet their needs.

Product Detail

New items

3SU1051-1HB20-0AA0, Siemens

Emergency Stop Push Button Heads, Plastic Siemens extremely rugged IP69K 22 mm e-stop mushroom push button heads in high-grade plastic. Available in a variety of colours and reset methods. Self-holding function of the actuator when mounting Twist prevention integrated into patented holder design Stackable contact modules Suitable for use in extreme environments No special tools required Simple geometry for mounting holes Siemens Sirius Act Range The SIRIUS ACT range of push buttons and signalling devices presents an expertly designed selection of push buttons, pilot lights and switches that are intelligent, reliable and physically robust. An innovative snap-on concept makes the task of installing a unit so effortless that it can be done with one hand. Made with real metals and high-grade plastics, installed with smart functions and interaction abilities, these state-of-the-art push buttons, indicator lights and switches have been extreme element tested to guarantee a long usage life and reliability for all your operations. One-handed installation without special tools Components can be snapped on without having to hold the other side Installation possible in a slanted position Modular concept Stylish design & high-quality materials Extremely Rugged & Reliable Flexible Communication - AS-I, IO Link and Profinet

Product Detail

New items

3SU1150-1HB20-1CG0, Siemens

Emergency Stop Push Button Complete Unit, Plastic Siemens extremely IP69K rugged 22 mm e-stop mushroom push button complete units in high-grade plastic. Easy installation Suitable for use in extreme environments No special tools required Simple geometry for mounting holes Connection to the most commonly used communication systems (PROFINET, AS-Interface, IO-Link) Standards IEC 60947-1, EN 60947-1 IEC 60947-5-1, EN 60947-5-1 Siemens Sirius Act Range The SIRIUS ACT range of push buttons and signalling devices presents an expertly designed selection of push buttons, pilot lights and switches that are intelligent, reliable and physically robust. An innovative snap-on concept makes the task of installing a unit so effortless that it can be done with one hand. Made with real metals and high-grade plastics, installed with smart functions and interaction abilities, these state-of-the-art push buttons, indicator lights and switches have been extreme element tested to guarantee a long usage life and reliability for all your operations. One-handed installation without special tools Components can be snapped on without having to hold the other side Installation possible in a slanted position Modular concept Stylish design & high-quality materials Extremely Rugged & Reliable Flexible Communication - AS-I, IO Link and Profinet

Product Detail

New items

LPZM1B5P01, Lovato

Enclosures made of aluminium alloy suitable for pushbuttons, selector switches and pilot lights Platinum and SLM series. The enclosures are supplied without any holes on the cover and on the base (no cable entry). Maximum 3 contacts for operator (with mounting adapter) mounted on the cover. Earth connection through threaded holes on the base and on the cover (screws supplied) Ambient conditions: Operating temperature: -25...+70°C Storage temperature: -40...+85°C

Product Detail

New items

C22-PVS45P-MS1-K02, Eaton

C22 Compact Emergency Stop Pushbuttons This range of C22 emergency stop push buttons from Eaton offers simplified and efficient installation due to the monoblock technology. The monoblock technology refers to the contact blocks being built in to each emergency stop push button device removing the need to buy and assemble added back panel components. This all in one unit also eliminates the need for self-monitoring contact blocks. The C22 compact series of emergency stop push buttons are designed to offer durability and reliability throughout a wide range of applications. Mechanical lifespan of over 50,000 cycles Operating temperature of -25 →+70

Product Detail

New items

C22-PVT60P-K02, Eaton

C22 Compact Emergency Stop Pushbuttons This range of C22 emergency stop push buttons from Eaton offers simplified and efficient installation due to the monoblock technology. The monoblock technology refers to the contact blocks being built in to each emergency stop push button device removing the need to buy and assemble added back panel components. This all in one unit also eliminates the need for self-monitoring contact blocks. The C22 compact series of emergency stop push buttons are designed to offer durability and reliability throughout a wide range of applications. Mechanical lifespan of over 50,000 cycles Operating temperature of -25 →+70

Product Detail

New items

231002, IDEM

IDEM Emergency Stop Pushbutton The IDEM ES-SS series emergency stop pushbutton has a red, unpainted round style head with a diameter of 40mm. Its housing is made from polyester material and the button is made of plastic material. This device is a standard duty emergency stop switch (E-Stop), designed to provide robust emergency stop protection for machines or exposed conveyors. A special lid safety trip mechanism enables the safety contacts to open if the lid is removed. This pushbutton has a contact current rating of 3A and a voltage rating of 240V. They are suitable for use within virtually all industry sectors. Features and Benefits 2NC/1NO contact configuration Twist to reset method Conduit entry of 1/2in NPT Non-illuminated High pressure hosed with detergents at high-temperature Connects to most safety relays to give up to PLeCat.4 Certifications ISO13850 EN60947-5-1 EN60947-5-5 UL 508 ISO13850 ISO13849-1

Product Detail

Emergency Stop Push Buttons

New Items

232009, IDEM

CE3T-10R-11, ABB

A22NE-M-P202-C, Omron

A165ES, Omron

LPZM1B501, Lovato

1SFA619502R1071 - CE3K-10R-11, ABB

3SU1051-1HB20-0AA0, Siemens

3SU1150-1HB20-1CG0, Siemens

LPZM1B5P01, Lovato

C22-PVS45P-MS1-K02, Eaton

C22-PVT60P-K02, Eaton

231002, IDEM

FAQs