Grab Wire Switches

New items

144021A, IDEM

IDEM Guardian Line GLS-SS Stainless Steel Safety Rope Pull Switches The Guardian Line GLS-SS from IDEM are safety rope pull switches with a stainless steel 316 housing able to withstand the tough environments found in the Food and Pharmaceutical industries. The fixing holes are under the cover of the switch to prevent food trap areas and can withstand chemical and detergent washdown due to all stainless steel parts and robust IP69K sealing by using integral bellows and gaskets. They are designed to be mounted on machines and sections of conveyors which cannot be protected by guards and unlike emergency stop pushbuttons can be activated from any point along the length of rope pull to provide robust emergency stop protection. In combination with a dual channel safety monitoring relay these safety rope switches can be used as emergency stop devices and monitored for up to Category 4 to EN 954-1 or PLe ISO 13849-1. The Guardian Line conforms to ISO 13850 and IEC 60947-5-5 and has a positive mechanical linkage between the switch contacts and the wire rope, as well as wire breakage monitoring. Once the rope is pulled, anywhere along its length, the safety contacts are positively opened and the auxiliary contacts are closed. The switches are mechanically latched and can only be returned to the operational condition by pressing the blue reset button, as required by ISO 13950. Switch mechanism will latch the instant the safety contacts open, ISO13850 standard Upto 80m (260 feet) can be covered using only a single switch and safety spring Upto 100m (328 feet) can be covered using two switches Positive break contacts to IEC60947-5-1 Stainless steel 316 housing IP69 protection Rugged integral sealing bellows mean they can be high pressure hosed All internal screws are stainless steel Easy to wire with 3 x M20 conduit entries 4 pole 2NO / 2 NC Note 826-4108 has an LED, 826-4117 has an E-stop, 826-4110 has LED ...

Product Detail

New items

142062, IDEM

IDEM Guardian Line GLS Standard Safety Rope Pull Switches The Guardian Line GLS from IDEM are safety rope pull switches with a robust yellow diecast housing that provide a general purpose safety solution and offer a choice of fittings depending on the application. They are designed to be mounted on machines and sections of conveyors which cannot be protected by guards and unlike emergency stop pushbuttons can be activated from any point along the length of rope pull to provide robust emergency stop protection. In combination with a dual channel safety monitoring relay these safety rope switches can be used as emergency stop devices and monitored for up to Category 4 to EN 954-1 or PLe ISO 13849-1. The Guardian Line conforms to ISO 13850 and IEC 60947-5-5 and has a positive mechanical linkage between the switch contacts and the wire rope, as well as wire breakage monitoring. Once the rope is pulled, anywhere along its length, the safety contacts are positively opened and the auxiliary contacts are closed. The switches are mechanically latched and can only be returned to the operational condition by pressing the blue reset button, as required by ISO 13950. Switch mechanism will latch the instant the safety contacts open, ISO13850 standard Upto 60m can be covered using only a single switch Upto 80m can be covered using two switches Positive break contacts to IEC60947-5-1 Robust yellow diecast housing IP67 protection Rugged integral sealing bellows mean they can be high pressure hosed All internal screws are stainless steel Easy to wire with 3 x M20 conduit entries 4 pole, either 3NC / 1NO, 2NC / 2NO or 4NC Note 826-4079 & 826-4088 have an E-stop, 826-4081 , 826-4085 & 826-4094 have an E-stop and LED. Standards IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1. Approvals CE, cULus, TUV.

Product Detail

New items

XY2CJR15H29, Telemecanique Sensors

Telemecanique XY2CJ Emergency Stop Rope Pull Switches The Preventa XY2CJ emergency stop rope pull switches from Telemecanique are designed to prevent injury to people or damage to machinery when a normal emergency stop function is not available. They are easy to install and offer a quick visual check of the switch status for machine restart. Typical applications include woodworking machines, shears, conveyor systems, printing machines, textile machines, rolling mills, test laboratories, paint shops and surface treatment works. Certified by UL with NiSD to the IEC 60947-5-5 and UL NiSD item category Embedded safety spring ensures function is maintained in the event of spring damage Fast mounting and wire adjustment with tensioner accessory Colour coded sections (green and yellow) on the pull reset button offer an easy visual check of the switch status for a quick machine restart Up to 20m cable length for the XY2CJS and up to 30m cable length for the XY2CJL & XY2CJR Four position turret head rotatable by 90° turns Various electrical connections options available IP66 / IP67 protection Standards IEC 60947-5-5. Approvals CE, UL, cULus, NiDS, CCC.

Product Detail

New items

XY2CJR17, Telemecanique Sensors

Telemecanique XY2CJ Emergency Stop Rope Pull Switches The Preventa XY2CJ emergency stop rope pull switches from Telemecanique are designed to prevent injury to people or damage to machinery when a normal emergency stop function is not available. They are easy to install and offer a quick visual check of the switch status for machine restart. Typical applications include woodworking machines, shears, conveyor systems, printing machines, textile machines, rolling mills, test laboratories, paint shops and surface treatment works. Certified by UL with NiSD to the IEC 60947-5-5 and UL NiSD item category Embedded safety spring ensures function is maintained in the event of spring damage Fast mounting and wire adjustment with tensioner accessory Colour coded sections (green and yellow) on the pull reset button offer an easy visual check of the switch status for a quick machine restart Up to 20m cable length for the XY2CJS and up to 30m cable length for the XY2CJL & XY2CJR Four position turret head rotatable by 90° turns Various electrical connections options available IP66 / IP67 protection Standards IEC 60947-5-5. Approvals CE, UL, cULus, NiDS, CCC.

Product Detail

New items

XY2CJL15H29, Telemecanique Sensors

Telemecanique XY2CJ Emergency Stop Rope Pull Switches The Preventa XY2CJ emergency stop rope pull switches from Telemecanique are designed to prevent injury to people or damage to machinery when a normal emergency stop function is not available. They are easy to install and offer a quick visual check of the switch status for machine restart. Typical applications include woodworking machines, shears, conveyor systems, printing machines, textile machines, rolling mills, test laboratories, paint shops and surface treatment works. Certified by UL with NiSD to the IEC 60947-5-5 and UL NiSD item category Embedded safety spring ensures function is maintained in the event of spring damage Fast mounting and wire adjustment with tensioner accessory Colour coded sections (green and yellow) on the pull reset button offer an easy visual check of the switch status for a quick machine restart Up to 20m cable length for the XY2CJS and up to 30m cable length for the XY2CJL & XY2CJR Four position turret head rotatable by 90° turns Various electrical connections options available IP66 / IP67 protection Standards IEC 60947-5-5. Approvals CE, UL, cULus, NiDS, CCC.

Product Detail

New items

XY2CJS17H29, Telemecanique Sensors

Telemecanique XY2CJ Emergency Stop Rope Pull Switches The Preventa XY2CJ emergency stop rope pull switches from Telemecanique are designed to prevent injury to people or damage to machinery when a normal emergency stop function is not available. They are easy to install and offer a quick visual check of the switch status for machine restart. Typical applications include woodworking machines, shears, conveyor systems, printing machines, textile machines, rolling mills, test laboratories, paint shops and surface treatment works. Certified by UL with NiSD to the IEC 60947-5-5 and UL NiSD item category Embedded safety spring ensures function is maintained in the event of spring damage Fast mounting and wire adjustment with tensioner accessory Colour coded sections (green and yellow) on the pull reset button offer an easy visual check of the switch status for a quick machine restart Up to 20m cable length for the XY2CJS and up to 30m cable length for the XY2CJL & XY2CJR Four position turret head rotatable by 90° turns Various electrical connections options available IP66 / IP67 protection Standards IEC 60947-5-5. Approvals CE, UL, cULus, NiDS, CCC.

Product Detail

New items

XY2CJL17H29, Telemecanique Sensors

Telemecanique XY2CJ Emergency Stop Rope Pull Switches The Preventa XY2CJ emergency stop rope pull switches from Telemecanique are designed to prevent injury to people or damage to machinery when a normal emergency stop function is not available. They are easy to install and offer a quick visual check of the switch status for machine restart. Typical applications include woodworking machines, shears, conveyor systems, printing machines, textile machines, rolling mills, test laboratories, paint shops and surface treatment works. Certified by UL with NiSD to the IEC 60947-5-5 and UL NiSD item category Embedded safety spring ensures function is maintained in the event of spring damage Fast mounting and wire adjustment with tensioner accessory Colour coded sections (green and yellow) on the pull reset button offer an easy visual check of the switch status for a quick machine restart Up to 20m cable length for the XY2CJS and up to 30m cable length for the XY2CJL & XY2CJR Four position turret head rotatable by 90° turns Various electrical connections options available IP66 / IP67 protection Standards IEC 60947-5-5. Approvals CE, UL, cULus, NiDS, CCC.

Product Detail

New items

XY2CJL17, Telemecanique Sensors

Telemecanique XY2CJ Emergency Stop Rope Pull Switches The Preventa XY2CJ emergency stop rope pull switches from Telemecanique are designed to prevent injury to people or damage to machinery when a normal emergency stop function is not available. They are easy to install and offer a quick visual check of the switch status for machine restart. Typical applications include woodworking machines, shears, conveyor systems, printing machines, textile machines, rolling mills, test laboratories, paint shops and surface treatment works. Certified by UL with NiSD to the IEC 60947-5-5 and UL NiSD item category Embedded safety spring ensures function is maintained in the event of spring damage Fast mounting and wire adjustment with tensioner accessory Colour coded sections (green and yellow) on the pull reset button offer an easy visual check of the switch status for a quick machine restart Up to 20m cable length for the XY2CJS and up to 30m cable length for the XY2CJL & XY2CJR Four position turret head rotatable by 90° turns Various electrical connections options available IP66 / IP67 protection Standards IEC 60947-5-5. Approvals CE, UL, cULus, NiDS, CCC.

Product Detail

New items

144009A, IDEM

IDEM Guardian Line GLS-SS Stainless Steel Safety Rope Pull Switches The Guardian Line GLS-SS from IDEM are safety rope pull switches with a stainless steel 316 housing able to withstand the tough environments found in the Food and Pharmaceutical industries. The fixing holes are under the cover of the switch to prevent food trap areas and can withstand chemical and detergent washdown due to all stainless steel parts and robust IP69K sealing by using integral bellows and gaskets. They are designed to be mounted on machines and sections of conveyors which cannot be protected by guards and unlike emergency stop pushbuttons can be activated from any point along the length of rope pull to provide robust emergency stop protection. In combination with a dual channel safety monitoring relay these safety rope switches can be used as emergency stop devices and monitored for up to Category 4 to EN 954-1 or PLe ISO 13849-1. The Guardian Line conforms to ISO 13850 and IEC 60947-5-5 and has a positive mechanical linkage between the switch contacts and the wire rope, as well as wire breakage monitoring. Once the rope is pulled, anywhere along its length, the safety contacts are positively opened and the auxiliary contacts are closed. The switches are mechanically latched and can only be returned to the operational condition by pressing the blue reset button, as required by ISO 13950. Switch mechanism will latch the instant the safety contacts open, ISO13850 standard Upto 80m (260 feet) can be covered using only a single switch and safety spring Upto 100m (328 feet) can be covered using two switches Positive break contacts to IEC60947-5-1 Stainless steel 316 housing IP69 protection Rugged integral sealing bellows mean they can be high pressure hosed All internal screws are stainless steel Easy to wire with 3 x M20 conduit entries 4 pole 2NO / 2 NC Note 826-4108 has an LED, 826-4117 has an E-stop, 826-4110 has LED ...

Product Detail

New items

XY2CJS17, Telemecanique Sensors

Telemecanique XY2CJ Emergency Stop Rope Pull Switches The Preventa XY2CJ emergency stop rope pull switches from Telemecanique are designed to prevent injury to people or damage to machinery when a normal emergency stop function is not available. They are easy to install and offer a quick visual check of the switch status for machine restart. Typical applications include woodworking machines, shears, conveyor systems, printing machines, textile machines, rolling mills, test laboratories, paint shops and surface treatment works. Certified by UL with NiSD to the IEC 60947-5-5 and UL NiSD item category Embedded safety spring ensures function is maintained in the event of spring damage Fast mounting and wire adjustment with tensioner accessory Colour coded sections (green and yellow) on the pull reset button offer an easy visual check of the switch status for a quick machine restart Up to 20m cable length for the XY2CJS and up to 30m cable length for the XY2CJL & XY2CJR Four position turret head rotatable by 90° turns Various electrical connections options available IP66 / IP67 protection Standards IEC 60947-5-5. Approvals CE, UL, cULus, NiDS, CCC.

Product Detail

New items

XY2CJS19H29, Telemecanique Sensors

Telemecanique XY2CJ Emergency Stop Rope Pull Switches The Preventa XY2CJ emergency stop rope pull switches from Telemecanique are designed to prevent injury to people or damage to machinery when a normal emergency stop function is not available. They are easy to install and offer a quick visual check of the switch status for machine restart. Typical applications include woodworking machines, shears, conveyor systems, printing machines, textile machines, rolling mills, test laboratories, paint shops and surface treatment works. Certified by UL with NiSD to the IEC 60947-5-5 and UL NiSD item category Embedded safety spring ensures function is maintained in the event of spring damage Fast mounting and wire adjustment with tensioner accessory Colour coded sections (green and yellow) on the pull reset button offer an easy visual check of the switch status for a quick machine restart Up to 20m cable length for the XY2CJS and up to 30m cable length for the XY2CJL & XY2CJR Four position turret head rotatable by 90° turns Various electrical connections options available IP66 / IP67 protection Standards IEC 60947-5-5. Approvals CE, UL, cULus, NiDS, CCC.

Product Detail

New items

440E-L22BNSM, Allen Bradley Guardmaster

Lifeline 4 Stainless Steel Rope Pull Switch The Lifeline 4 rope pull switch can be installed along or around awkward machinery such as conveyors and provide a constant emergency stop access. It is made from stainless steel 316 and is suitable for applications where there are hygiene requirements, external use and other situations where a level of corrosion resistance is required. The positive mode mechanism of the Lifeline 4 helps ensure that the contacts are immediately latched open on actuation and can only be reset by the intentional action of turning the blue reset knob. The design also protects against nuisance tripping and the effects of thermal expansion. The rope pull switch has a mushroom head emergency stop button to provide E-Stop access even at the extreme ends of the span. The cable status indicator on the Lifeline 4 makes the system easy to set up and maintain for spans up to 75 meters. Switches up to 75 m span Universal mounting and operation Lid mounted emergency stop button, designed to conform to ISO 850 Switch lockout on cable pulled and cable slack Cable status indicator on switch lid Investment cast 316 unpainted stainless steel housing as opposed to a painted die-cast zinc alloy External mounting holes, which are a function of the casting process The seal between the lid and the body protrudes slightly so that it is not a food trap Rugged, corrosion resistant for harsh conditions such as outdoors or washdown areas (IP66/67) Markings are laser-etched so will not flake off Operating temperature range: -25 to +80°C Four sets of contacts are provided: 2 NC + 2 NO Standards EN 418, EN 60947-5-5, IEC 60947-5-1, ISO 13850, ISOTR 12100. Approvals CE, cULus, TUV. Allen Bradley Cable Switch The Allen Bradley Guardmaster 440E series emergency stop grab wire cable switch has 2NO/2NC contact configura...

Product Detail

New Items

144021A, IDEM

142062, IDEM

XY2CJR15H29, Telemecanique Sensors

XY2CJR17, Telemecanique Sensors

XY2CJL15H29, Telemecanique Sensors

XY2CJS17H29, Telemecanique Sensors

XY2CJL17H29, Telemecanique Sensors

XY2CJL17, Telemecanique Sensors

144009A, IDEM

XY2CJS17, Telemecanique Sensors

XY2CJS19H29, Telemecanique Sensors

440E-L22BNSM, Allen Bradley Guardmaster

FAQs