Machine Guarding Accessories

New items

889D-F8AB-10, Allen Bradley Guardmaster

Allen Bradley GuardMaster Cordset The Allen Bradley GuardMaster Cordset is a straight female 8-pin unshielded PVC cable. It is a 10m Cordset used with GuardShield™ safety light curtain. It has a 14mm resolution. DIP switch selectable modes of operation located beneath a security door in the end caps offer features that include: Fixed blanking (teachable) Floating blanking (one or two beams) Beam coding start/restart interlock External device monitoring (EDM) Two safety solid-state and one auxiliary non-safety outputs Easy maintenance with the Quick Disconnect cables (4-pin for the sender, 8-pin for the receiver) Installation and operation of this safety device must be in strict accordance with accompanying operating instructions Note: When ordering both a sender and receiver are included. Also, a sender cable and a receiver cable will be required. For suitable safety relays, see the Minotaur" range of products (e. G 447-5587)" Features and Benefits Magnetic coded sensing Four housing styles Must be operated with its own safety control unit PUR jacket provides good oil and chemical resistance Ratcheting coupling nuts for vibration resistance Certifications EN 1088 EN 954-1 cat. 3 EN 60204-1 CCC CE certified CUL certified KC UL approved IP67 rated

Product Detail

New items

404201, IDEM

IDEM Non Contact RFID Safety Switches The LPF-RFID and SPF-RFID from IDEM are non-contact safety switches that have been developed to provide and maintain a high level of functional safety whilst providing a very high anti-tamper coded activation. The coding is achieved using magnetic and RFID techniques, both principles need to be satisfied for the switch to operate safely. The RFID sensing provides a tamper resistant operation when the actuator is in the sensing range of the switch. These non-contact safety switches have plastic housings and offer IP69K ingress protection. They can be used in almost any environment including areas where high pressure cleaning is required and are suitable for CIP and SIP processes. Available in two types, either coded by series or uniquely coded, these RFID safety switches have a typical sensing distance of 14mm (on), and a wide tolerance to guard misalignment after setting. The LPF-RFID and SPF-RFID series will connect to most popular standard Safety Relays to achieve up to PLe/Category 4 to ISO13849-1. Master Code - by series (any actuator will operate any switch) - used when unique door activation is not required, but the benefit of RFID makes it virtually impossible to be overridden or by-passed by simple means. Unique Code - 32,000,000 unique codes. These switches are factory set and used when unique activation is required in areas where there are many interlocked doors and security of individual areas is required. RFID coded actuation to provide high tamper proof interlock security on guard doors Unique RFID or series coding RFID available - dependent upon user risk assessment Connects to most safety relays to maintain PLe/Cat4 Connect up to 20 switches in series Ability to connect other switches and E-Stops in series High functional safety to ISO13849-1 Diagnostic green LED - indication of safety circuits closed 2NC safety outputs short circuit protected 1NO ...

Product Detail

New items

532109, Pilz

"The actuator PSEN ma1.3-08 VA belongs to the safety switch Coded actuator Safety switch with cable (5 m/ 10 m) 2 safety contacts (reed contacts - N/O) 1 auxiliary contact (N/O) Operation Magnetic Switching voltage 24 VDC LED to display switch status Switch and actuator from stainless steel "

Product Detail

New items

140012, IDEM

IDEM Guardian Line Safety Rope Pull Accessories A range of accessories to support the Guardian Line rope pull switches. 826-4136 , 5m rope kit, 3 eyebolts, 1 tensioner/gripper, 1 Allen key 826-4145 , 10m rope kit, 5 eyebolts, 1 tensioner/gripper, 1 Allen key 826-4148 , 15m rope kit, 7 eyebolts, 1 tensioner/gripper, 1 Allen key 826-4142 , 20m rope kit, 9 eyebolts, 1 tensioner/gripper, 1 Allen key 826-4151 , 30m rope kit, 12 eyebolts, 1 tensioner/gripper, 1 Allen key 826-4154 , 50m rope kit, 20 eyebolts, 1 tensioner/gripper, 1 Allen key 826-4158 , 80m rope kit, 30 eyebolts, 2 tensioner/grippers, 2 Allen keys 826-4167 , 100m rope kit, 37 eyebolts, 2 tensioner/grippers, 2 Allen keys 826-4160 , safety end spring 826-4164 , universal pulley (inside & outside corners) 826-4173 , cable gland, M20 x 1.5 123-7509 , Flexible Roller Eyebolt with Adjustment 123-7510 , Flexible Roller Eyebolt with Nuts

Product Detail

New items

140010, IDEM

IDEM Guardian Line Safety Rope Pull Accessories A range of accessories to support the Guardian Line rope pull switches. 826-4136 , 5m rope kit, 3 eyebolts, 1 tensioner/gripper, 1 Allen key 826-4145 , 10m rope kit, 5 eyebolts, 1 tensioner/gripper, 1 Allen key 826-4148 , 15m rope kit, 7 eyebolts, 1 tensioner/gripper, 1 Allen key 826-4142 , 20m rope kit, 9 eyebolts, 1 tensioner/gripper, 1 Allen key 826-4151 , 30m rope kit, 12 eyebolts, 1 tensioner/gripper, 1 Allen key 826-4154 , 50m rope kit, 20 eyebolts, 1 tensioner/gripper, 1 Allen key 826-4158 , 80m rope kit, 30 eyebolts, 2 tensioner/grippers, 2 Allen keys 826-4167 , 100m rope kit, 37 eyebolts, 2 tensioner/grippers, 2 Allen keys 826-4160 , safety end spring 826-4164 , universal pulley (inside & outside corners) 826-4173 , cable gland, M20 x 1.5 123-7509 , Flexible Roller Eyebolt with Adjustment 123-7510 , Flexible Roller Eyebolt with Nuts

Product Detail

New items

210005, IDEM

IDEM GBN Gate Bolts for Non Contact Switches A range of accessories for IDEM non-contact switches. Stock no. 123-7530 , GBN-1 Sliding Gate Bolt, left Stock no. 123-7531 , GBN-1 Sliding Gate Bolt, right Stock no. 123-7532 , GBN-3 Spring Loaded Gate Bolt, left Stock no. 123-7533 , GBN-3 Spring Loaded Gate Bolt, right Stock no. 826-4063 , Rear Handle for GBL-1 and GBA-1 Stock no. 826-4072 , Spring Loaded Catch for GBL-1 and GBA-1

Product Detail

New items

3SE5000-0AU22, Siemens

3SE5 Hinge Switch The SIRIUS 3SE5 Series hinge switch is designed for monitoring hinged doors and flaps. These mechanical position switches offer excellent protection from tampering thanks to the fixed, positive pivoting point connection between switch and door hinge. They have a standard enclosure according to EN 50047 and EN 50041 and a very small operating angle. Simultaneous shut down and signalling is provided in addition by the snap-action contacts. For the mechanical monitoring of protective doors or flaps Protection up to Cat 4 (EN 954-1), Up to SIL 3 IEC 62061 Snap on contacts Simple, fast wiring offers approx 20 to 25% reduction in connection time Cable entry M20 x 1.5 Actuator head can be rotated in 22.5° increments Note Actuators are supplied, accessories are for spares. Hinge Switch

Product Detail

New items

772200, Pilz

The connection cables MM A MINI-IO CAB99 are used to connect an incremental encoder or adapter to the speed monitors PNOZ m EF 1MM, PNOZ m EF 2MM or PSSu K F EI. The connection to the speed monitor is made via the Mini-IO connector. The signals and the braided shield for connecting the incremental encoder or adapter feature wires with crimp connectors. The cable cores are labelled.

Product Detail

New items

R1.190.1000.0, Wieland

Wieland Samos PRO COMPACT Safety Control The samosPRO Compact is suitable for monitoring non-contact safety sensors, emergency off buttons, protective door switches and door closures, two-hand controls as well as testable safety light barriers, light curtains and laser scanners. Not only is it suitable for use in machinery and plant engineering but also, for example, for safety-related control tasks in elevator installations, industrial combustion plants and process technology systems. 24 safe in- and outputs on 45 mm construction width for space and cost savings USB and Ethernet interfaces for remote maintenance always on board Industrial Ethernet protocols integrated 512 kb program memory offers space for each project 4 A switching power at each output Ambient temperature -25 to +65 °C Modular extendability to up to 172 secure in-/outputs Optical display of all in- and outputs in system Pluggable connection technology with either screw or push-in terminal blocks SP-COP1 COMPACT Module SIL CL 3 (EN 62061-1) PL e / Category 4 (EN ISO 13849-1) 20 safe inputs, 4 safe outputs USB interface SD slot for program memory (memory card ordered separately, stock no. 871-4615 ) SP-COP2 COMPACT Module with Ethernet SIL CL 3 (EN 62061-1) PL e / Category 4 (EN ISO 13849-1) 16 inputs, 4 outputs, 4 configurable I/O USB interface Ethernet interface Industrial Ethernet protocol (stock no. 871-4609 only) SD slot for program memory (memory card ordered separately, stock no. 871-4615 SP-PROFIBUS-DP Gateway Fieldbus protocol PROFIBUS-DP Bidirectional communication with PLC Transfer rate 12 MBaud Transfer of at least 50 bytes of data Simple configuration with samos® plan SP-CANopen Gateway Fieldbus protocol CANopen Bidirectional communication with PLC Transfer rate up to 1 MBit/s Transfer of at leas...

Product Detail

New items

XCSZ13, Telemecanique Sensors

XCSTA Safety Interlock Switch 3 positive opening contacts as standard, on guard opening Head rotates in 90° steps giving 8 actuator entry points Minimum operating force for positive opening: 15N Ingress protection IP67 2 x cable entries tapped M16 x 1.5 ISO or PG11 Actuator needs ordering separately (see stock no. 252-3870 typically) Interlock Switch

Product Detail

New items

XCSZ11, Telemecanique Sensors

XCSTA Safety Interlock Switch 3 positive opening contacts as standard, on guard opening Head rotates in 90° steps giving 8 actuator entry points Minimum operating force for positive opening: 15N Ingress protection IP67 2 x cable entries tapped M16 x 1.5 ISO or PG11 Actuator needs ordering separately (see stock no. 252-3870 typically) Interlock Switch

Product Detail

New items

XCSZ12, Telemecanique Sensors

XCS PA Series, Miniature 2 positive opening contacts as standard, on guard opening Head rotates in 90° steps giving 8 actuator entry points Minimum operating force for positive opening: 15N Ingress protection IP67 1 x cable entry tapped M16 x 1.5 ISO or PG11 Actuator needs ordering separately (see stock no. 252-3870 typically) Standards Complies with EN1088, EN60204 Interlock Switch

Product Detail

Machine Guarding Accessories

New Items

889D-F8AB-10, Allen Bradley Guardmaster

404201, IDEM

532109, Pilz

140012, IDEM

140010, IDEM

210005, IDEM

3SE5000-0AU22, Siemens

772200, Pilz

R1.190.1000.0, Wieland

XCSZ13, Telemecanique Sensors

XCSZ11, Telemecanique Sensors

XCSZ12, Telemecanique Sensors

FAQs