Non Contact Safety Switches

New items

135029, IDEM

IDEM HYGIEMAG CMR-F Non Contact Safety Switch The HYGIEMAG CMR-F safety switch has been developed for non-contact guard door interlocking of hinged, sliding or removable guard doors. It is ideal for applications that require a wide tolerance to misalignment, a high switching capacity or high levels of hygiene. When used with dual channel safety relays, the CMR-F safety switch can be used to provide up to PLe/Category 4 to ISO13849-1 protection. Features and Benefits Magnetic high-power switching Dual channel safety outputs Stainless steel 316 housing High temperature stability up to 105°C Can be mounted on steel structures High tolerance to guard misalignment IP69K protection Conformance to EN60947-5-3 PDF-S Up to PLe ISO 13849-1 Slim fitting for all industry applications Suitable for food contact zones - EHEDG Guidelines Mirror Polished Finish to Ra4 Suitable for CIP and SIP cleaning Mounting holes at rear - no food traps Easy to install within narrow frame structures Operates from two sides for ease of applications 2NC / 1 NO 12 mm wide sensing Switching capacity 1 A or 2 A available 55 & 73 mm fixing centres Housing: 20.6 x 85 x 17 mm Applications The HYGIEMAG CMR-F non-contact safety switch is ideal for the food processing, pharmaceutical, packaging and chemical industries. Note The normally closed (NC) circuits are closed when the guard is closed and the actuator is present. Standards EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508. Approvals CE, cULus, TUV. Supplied with Actuator.

Product Detail

New items

135022, IDEM

IDEM HYGIEMAG CMR-F Non Contact Safety Switch The HYGIEMAG CMR-F safety switch has been developed for non-contact guard door interlocking of hinged, sliding or removable guard doors. It is ideal for applications that require a wide tolerance to misalignment, a high switching capacity or high levels of hygiene. When used with dual channel safety relays, the CMR-F safety switch can be used to provide up to PLe/Category 4 to ISO13849-1 protection. Features and Benefits Magnetic high-power switching Dual channel safety outputs Stainless steel 316 housing High temperature stability up to 105°C Can be mounted on steel structures High tolerance to guard misalignment IP69K protection Conformance to EN60947-5-3 PDF-S Up to PLe ISO 13849-1 Slim fitting for all industry applications Suitable for food contact zones - EHEDG Guidelines Mirror Polished Finish to Ra4 Suitable for CIP and SIP cleaning Mounting holes at rear - no food traps Easy to install within narrow frame structures Operates from two sides for ease of applications 2NC / 1 NO 12 mm wide sensing Switching capacity 1 A or 2 A available 55 & 73 mm fixing centres Housing: 20.6 x 85 x 17 mm Applications The HYGIEMAG CMR-F non-contact safety switch is ideal for the food processing, pharmaceutical, packaging and chemical industries. Note The normally closed (NC) circuits are closed when the guard is closed and the actuator is present. Standards EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508. Approvals CE, cULus, TUV. Supplied with Actuator.

Product Detail

New items

116013, IDEM

IDEM IDEMAG RPR Non Contact Safety Switch The IDEMAG RPR safety switch has been developed for non-contact interlocking of hinged, sliding or removable guard doors. It is ideal for applications that require a wide tolerance to misalignment, high switching capacity or high level of hygiene. When used with a dual channel safety relay, this safety switch can be used to provide up to PLe/Category 4 to ISO13849-1. Features and Benefits Magnetic high-power switching Dual channel safety outputs Plastic high specification polyester housing High temperature stability up to 80°C High tolerance to guard misalignment Resistant to many organic and inorganic chemicals IP69K protection Resistant to high temperature hosing and detergent wash down Conformance to EN60947-5-3 PDF-S Up to PLe ISO 13849-1 Cylindrical fitting suitable for all industry applications Easy to install M30 threaded body - easy to set 10 mm wide sensing Switching capacity 0.5 A Applications The IDEMAG RPR Non-contact Safety Switch is designed for use in general factory automation, packaging and some food processing industries. Note The normally closed (NC) circuits are closed when the guard is closed and the actuator is present. Standards EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508. Approvals CE, cULus, TUV. Supplied with Actuator.

Product Detail

New items

111014, IDEM

IDEM IDEMAG SPR Non Contact Safety Switch The IDEMAG SPR safety switch has been developed for non-contact interlocking of hinged, sliding or removable guard doors. It is ideal for applications that require a wide tolerance to misalignment, high switching capacity or high level of hygiene. When used with a dual channel safety relay, this safety switch can be used to provide up to PLe/Category 4 to ISO13849-1. Features and Benefits Magnetic high-power switching Dual channel safety outputs Plastic high specification polyester housing High temperature stability up to 80°C High tolerance to guard misalignment Resistant to many organic and inorganic chemicals IP69K protection Resistant to high temperature hosing and detergent wash down Conformance to EN60947-5-3 PDF-S Up to PLe ISO 13849-1 Universal fitting suitable for most general industry applications 12 mm wide sensing Switching capacity 1 A 22 mm fixing centres Applications The IDEMAG SPR Non-contact Safety Switch is designed for use in general factory automation, packaging and some food processing industries. Note The normally closed (NC) circuits are closed when the guard is closed and the actuator is present. Standards EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508. Approvals CE, cULus, TUV. Supplied with Actuator.

Product Detail

New items

404104, IDEM

IDEM Non Contact RFID Safety Switches The LPF-RFID and SPF-RFID from IDEM are non-contact safety switches that have been developed to provide and maintain a high level of functional safety whilst providing a very high anti-tamper coded activation. The coding is achieved using magnetic and RFID techniques, both principles need to be satisfied for the switch to operate safely. The RFID sensing provides a tamper resistant operation when the actuator is in the sensing range of the switch. These non-contact safety switches have plastic housings and offer IP69K ingress protection. They can be used in almost any environment including areas where high pressure cleaning is required and are suitable for CIP and SIP processes. Available in two types, either coded by series or uniquely coded, these RFID safety switches have a typical sensing distance of 14mm (on), and a wide tolerance to guard misalignment after setting. The LPF-RFID and SPF-RFID series will connect to most popular standard Safety Relays to achieve up to PLe/Category 4 to ISO13849-1. Master Code - by series (any actuator will operate any switch) - used when unique door activation is not required, but the benefit of RFID makes it virtually impossible to be overridden or by-passed by simple means. Unique Code - 32,000,000 unique codes. These switches are factory set and used when unique activation is required in areas where there are many interlocked doors and security of individual areas is required. RFID coded actuation to provide high tamper proof interlock security on guard doors Unique RFID or series coding RFID available - dependent upon user risk assessment Connects to most safety relays to maintain PLe/Cat4 Connect up to 20 switches in series Ability to connect other switches and E-Stops in series High functional safety to ISO13849-1 Diagnostic green LED - indication of safety circuits closed 2NC safety outputs short circuit protected 1NO ...

Product Detail

New items

464006, IDEM

IDEM Non Contact RFID Locking Switches The MGL series from IDEM are non-contact RFID coded switches that have been developed to provide and maintain a high level of functional safety whilst providing a reliable electromagnet door interlock. To cover various applications, the holding force ranges from 600N to 1500N. The coding is achieved using magnetic and RFID techniques, both principles need to be satisfied for the switch to operate safely. The RFID sensing provides a tamper resistant operation when the actuator is in the sensing range of the switch. These non-contact safety switches are available in stainless steel 316, high specification robust plastic or diecast metal housings and can be used in almost any environment including high pressure cleaning. The stainless steel 316 version has been designed with a stainless steel magnet and IP69K rating making it suitable for CIP and SIP processes. There are 2 LEDs that offer 5 diagnostic functions to the user. The MGL switches provide two safe switching outputs for use with the majority of popular safety relays as well as a semi-conductor auxiliary signal to indicate the door position, meaning it can achieve up to PLe/Category 4 to ISO13849-1. Master Code - by series (any actuator will operate any switch) this is used when unique door activation is not required, but the benefit of RFID makes it virtually impossible to be overridden or by-passed by simple means. RFID coded actuation to provide high tamper proof interlock security on guard doors Series Coded RFID available Connects to most popular safety relays to achieve up to PLe and Cat.4 for ISO3849-1 Connect up to 20 switches in series Ability to connect other switches and E-Stops in series Unique triggering of solenoid latching mechanism to maintain close control of actuator position Quick connect (QC-M12) and cable versions available Remanent magnetization holding technique acts as a light magnetic ...

Product Detail

New items

460006, IDEM

IDEM Non Contact RFID Locking Switches The MGL series from IDEM are non-contact RFID coded switches that have been developed to provide and maintain a high level of functional safety whilst providing a reliable electromagnet door interlock. To cover various applications, the holding force ranges from 600N to 1500N. The coding is achieved using magnetic and RFID techniques, both principles need to be satisfied for the switch to operate safely. The RFID sensing provides a tamper resistant operation when the actuator is in the sensing range of the switch. These non-contact safety switches are available in stainless steel 316, high specification robust plastic or diecast metal housings and can be used in almost any environment including high pressure cleaning. The stainless steel 316 version has been designed with a stainless steel magnet and IP69K rating making it suitable for CIP and SIP processes. There are 2 LEDs that offer 5 diagnostic functions to the user. The MGL switches provide two safe switching outputs for use with the majority of popular safety relays as well as a semi-conductor auxiliary signal to indicate the door position, meaning it can achieve up to PLe/Category 4 to ISO13849-1. Master Code - by series (any actuator will operate any switch) this is used when unique door activation is not required, but the benefit of RFID makes it virtually impossible to be overridden or by-passed by simple means. RFID coded actuation to provide high tamper proof interlock security on guard doors Series Coded RFID available Connects to most popular safety relays to achieve up to PLe and Cat.4 for ISO3849-1 Connect up to 20 switches in series Ability to connect other switches and E-Stops in series Unique triggering of solenoid latching mechanism to maintain close control of actuator position Quick connect (QC-M12) and cable versions available Remanent magnetization holding technique acts as a light magnetic ...

Product Detail

New items

540203, Pilz

"Transponder technology for presence detection Pilz coding type: Coded Dual-channel operation 2 safety outputs LED display for: – State of the actuator – Supply voltage/fault 4 directions of actuation "

Product Detail

New items

542109, Pilz

"Transponder technology for presence detection Pilz coding type: Coded Dual-channel operation 2 safety outputs LED display for: – State of the actuator – Supply voltage/fault 4 directions of actuation "

Product Detail

New items

542203, Pilz

"Transponder technology for presence detection Pilz coding type: Coded Dual-channel operation 2 safety outputs LED display for: – State of the actuator – Supply voltage/fault 4 directions of actuation "

Product Detail

New items

542209, Pilz

"Transponder technology for presence detection Pilz coding type: Coded Dual-channel operation 2 safety outputs LED display for: – State of the actuator – Supply voltage/fault 4 directions of actuation "

Product Detail

New items

440N-Z21SS2BN9, Allen Bradley Guardmaster

SensaGuard 440N Rectangular Non-Contact Switch The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive technology for sensing. Combined with a large sensing range for optimum operation and tolerance to misalignment, these non-contact switches are a cost-effective solution to a wide range of industrial safety applications. No dedicated controller required for its RFID coding security Switches can be connected in series with other devices (e.g. Light Curtains, E-stops, interlock switches) PLe, SIL 3, Cat 4 rating maintained with multiple units connected in series Can be connected to standard safety relays, SmartGuards and safety I/O blocks They provide three different types of PNP output including one auxiliary PNP Equipped with an LED to indicate the device status and any faults IP69K environmental rating Standards EN 60947-5-3, IEC 61508, EN 954

Product Detail

Non Contact Safety Switches

New Items

135029, IDEM

135022, IDEM

116013, IDEM

111014, IDEM

404104, IDEM

464006, IDEM

460006, IDEM

540203, Pilz

542109, Pilz

542203, Pilz

542209, Pilz

440N-Z21SS2BN9, Allen Bradley Guardmaster

FAQs