Solenoid Interlock Switches

New items

201001, IDEM

IDEM SEZYLOCK KLP Solenoid Interlock Switch The SEZYLOCK KLP is a guard locking safety interlock switch that fits to the leading edge of sliding or hinged machine guards. It provides a lock mechanism to keep the guard closed until the hazard has been removed. It is tongue operated with positively operated switching contacts and a strong tamper resistant key mechanism. It provides robust position interlock detection for moving guards. This solenoid interlock switch can be used with safety timers to provide a delay before allowing the guard to open (for example machines that require a rundown). Depending upon the risk assessment for the application, it can be used independently to provide positively operated contacts to IEC 60947-5-1 or used with any dual channel safety monitoring relay to provide up to Category 4 PLe ISO 13849-1 or SIL3 EN62061. Features and Benefits Power to unlock, stock no. 826-3993 Power to lock, stock no. 123-7511 2 lock monitoring safety contacts for high function and diagnostic specification 2 emergency manual release points Positive break contacts to IEC 60947-5-1 High functional safety to ISO 13849-1 Connects to most safety relays to give up to PLe Cat.4 1 conduit entry point M20 LED to indicate lock status IP67 protection High holding force 1800 N 8 actuator entry positions Red plastic body and stainless steel head Rotatable head 30 mm fixing centres Applications The SEZYLOCK KLP solenoid interlock switch and has been designed for use in the Food Processing, Pharmaceutical, Packaging and Petrochemical industries. Note Not supplied with an actuator. Standard, flat, heavy duty flexible and hygienic actuators are available separately. The flexible actuators are perfect for tight radius guards. The hygienic actuator is made from stainless steel with a mirror polished finish. Standards EN108...

Product Detail

New items

XCSE7311, Telemecanique Sensors

Telemecanique Sensors Solenoid Interlock Switch The Telemecanique Sensors XCS-E series solenoid interlock switch has a power supply voltage rating of 24VAC/DC. It has 1NO/2NC safety slow break contacts. The switch is made of metal housing material and has the power to unlock type. Note: Actuators must be purchased separately, see accessories table. Features and Benefits 2 cable entries tapped Pg 13.5 8 actuator entries and 1 tapped entry Key operated lock to allow authorised override of solenoid (key supplied) 2 LED indicators (orange/guard open, green/guard closed, key in locked position) Heavy-duty metal compact style to IP67 Turret heads can be rotated through 360° in 90 steps 20N minimum operating force for positive opening Productivity increases due to the third contact dedicated to diagnostics Certifications IP67 rated EN1088 EN60204 EN 1088/ISO14119 EN/IEC 60204-1 EN/IEC 60947-5-1 EN/ISO 12100 UL508 CSAC22.2 No 14

Product Detail

New items

XCSE5311, Telemecanique Sensors

XCSE Solenoid Interlock Switch Key operated lock to allow authorised override of solenoid (key supplied) 2 LED indicators (orange/guard open, green/guard closed, key in locked position) Heavy duty metal compact style to IP67 Turret heads can be rotated through 360° in 90 steps 8 actuator entries and 1 tapped entry Contact rating 24 Vac/6 A; 110 Vac/3 A; 230 Vac/2 A; 24 Vdc/0.5 A for 1000000 operations 20N minimum operating force for positive opening Productivity is increased due to the third contact dedicated to diagnostics Note Actuators must be purchased separately, see Accessories table. Standards Conforms to EN1088, EN60204 Standards Conforms to EN1088, EN60204.

Product Detail

New items

XCSE7331, Telemecanique Sensors

XCSE Solenoid Interlock Switch Key operated lock to allow authorised override of solenoid (key supplied) 2 LED indicators (orange/guard open, green/guard closed, key in locked position) Heavy duty metal compact style to IP67 Turret heads can be rotated through 360° in 90 steps 8 actuator entries and 1 tapped entry Contact rating 24 Vac/6 A; 110 Vac/3 A; 230 Vac/2 A; 24 Vdc/0.5 A for 1000000 operations 20N minimum operating force for positive opening Productivity is increased due to the third contact dedicated to diagnostics Note Actuators must be purchased separately, see Accessories table. Standards Conforms to EN1088, EN60204 Standards Conforms to EN1088, EN60204.

Product Detail

New items

XCSTE7311, Telemecanique Sensors

XCSTE Solenoid Interlock Switch Suitable for interlocking small moveable guards (EN1088, EN60204, EN292) 2 positive opening contacts as standard, on guard opening 1 N/C positive internal control contact operated by the solenoid Key operated lock to allow authorised override of solenoid Solenoid continuously rated 10VA, voltage limits -20 / +10% (including ripple on d.c.) Turret heads can be rotated through 360° in 90 steps 8 actuator entries and 1 tapped entry Contact rating 10VA (Solenoid continuously rated) 15N minimum operating force for positive opening IP67 rating Note Actuators must be purchased separately, see Accessories table.

Product Detail

New items

450001, IDEM

IDEM RAMZLOCK KLTM Solenoid Interlock Switch The RAMZLOCK KLTM is a guard locking safety interlock switch that fits to the leading edge of sliding or hinged machine guards. It provides a lock mechanism to keep the guard closed until the hazard has been removed. It is tongue operated with positively operated switching contacts and a strong tamper resistant key mechanism. It provides robust position interlock detection for moving guards. This solenoid interlock switch can be used with safety timers to provide a delay before allowing the guard to open (for example machines that require a rundown). Depending upon the risk assessment for the application, it can be used independently to provide positively operated contacts to IEC 60947-5-1 or used with any dual channel safety monitoring relay to provide up to Category 4 PLe ISO 13849-1 or SIL3 EN62061. Features and Benefits Spring to lock when actuator is inserted - power to unlock 2 lock monitoring safety contacts for high function and diagnostic specification 2 emergency manual release points Positive break contacts to IEC 60947-5-1 High functional safety to ISO 13849-1 Rotatable head Connects to most safety relays to give up to PLe Cat.4 3 conduit entry points M20 LED 1 status of solenoid applied power LED 2 status of guard lock IP67 protection High holding force 2000 N 4 actuator entry positions Red painted diecast body and stainless steel head 73 mm fixing centres Applications The RAMZLOCK KLTM solenoid interlock switch and has been designed for use in the Food Processing, Pharmaceutical, Packaging and Petrochemical industries. Note Not supplied with an actuator. Standard, flat, heavy duty flexible and hygienic actuators are available separately. The flexible actuators are perfect for tight radius guards. The hygienic actuator is made from stainless steel with a mirror polished finish. Standa...

Product Detail

New items

205001, IDEM

IDEM HYGIELOCK Solenoid Interlock Switch The HYGIELOCK is a guard locking safety interlock switch that fits to the leading edge of sliding or hinged machine guards. It provides a lock mechanism to keep the guard closed until the hazard has been removed. It is tongue operated with positively operated switching contacts and a strong tamper resistant key mechanism. It provides robust position interlock detection for moving guards. This solenoid interlock switch can be used with safety timers to provide a delay before allowing the guard to open (for example machines that require a rundown). Depending upon the risk assessment for the application, it can be used independently to provide positively operated contacts to IEC 60947-5-1 or used with any dual channel safety monitoring relay to provide up to Category 4 PLe ISO 13849-1 or SIL3 EN62061.. Features and Benefits Power to unlock Rear manual release button, stock nos. 826-4013 , 826-4016 , 826-4019 Stainless steel 316 body and head 2 lock monitoring safety contacts for high function and diagnostic specification 2 emergency manual release points Positive break contacts to IEC 60947-5-1 High functional safety to ISO 13849-1 Rotatable head Connects to most safety relays to give up to PLe Cat.4 3 conduit entry points M20 LED status of solenoid applied power IP69K protection High holding force 2000 N 8 actuator entry positions 30 mm fixing centres Applications The HYGIELOCK solenoid interlock switch and has been designed for use in the Food Processing, Pharmaceutical, Packaging and Petrochemical industries. Note Not supplied with an actuator. Standard, flat, heavy duty flexible and hygienic actuators are available separately. The flexible actuators are perfect for tight radius guards. The hygienic actuator is made from stainless steel with a mirror polished finish. Standards ...

Product Detail

New items

221301, IDEM

IDEM LEILOCK KL1-P Solenoid Interlock Switch The LEILOCK KL1-P is a guard locking safety interlock switch that fits to the leading edge of sliding or hinged machine guards. It provides a lock mechanism to keep the guard closed until the hazard has been removed. It is tongue operated with positively operated switching contacts and a strong tamper resistant key mechanism. It provides robust position interlock detection for moving guards. This solenoid interlock switch can be used with safety timers to provide a delay before allowing the guard to open (for example machines that require a rundown). Depending upon the risk assessment for the application, it can be used independently to provide positively operated contacts to IEC 60947-5-1 or used with any dual channel safety monitoring relay to provide up to Category 4 PLe ISO 13849-1 or SIL3 EN62061. Features and Benefits Spring to lock when actuator is inserted - energise solenoid to unlock 2 lock monitoring safety contacts for high function and diagnostic specification 2 emergency manual release points Positive break contacts to IEC 60947-5-1 High functional safety to ISO 13849-1 Connects to most safety relays to give up to PLe Cat.4 1 conduit entry point M20 IP67 protection Medium holding force 1400N 4 actuator entry positions Red plastic body and head Rotatable head LED 1 status of solenoid applied power LED 2 status of guard lock 40 mm fixing centres Applications The LEILOCK KL1-P solenoid interlock switch and has been designed for use in the Food Processing, Pharmaceutical, Packaging and Petrochemical industries. Note Not supplied with an actuator. Standard, flat, heavy duty flexible and hygienic actuators are available separately. The flexible actuators are perfect for tight radius guards. The hygienic actuator is made from stainless steel with a mirror polished finish. Standards ...

Product Detail

New items

XCSE5511, Telemecanique Sensors

XCSE Solenoid Interlock Switch Key operated lock to allow authorised override of solenoid (key supplied) 2 LED indicators (orange/guard open, green/guard closed, key in locked position) Heavy duty metal compact style to IP67 Turret heads can be rotated through 360° in 90 steps 8 actuator entries and 1 tapped entry Contact rating 24 Vac/6 A; 110 Vac/3 A; 230 Vac/2 A; 24 Vdc/0.5 A for 1000000 operations 20N minimum operating force for positive opening Productivity is increased due to the third contact dedicated to diagnostics Note Actuators must be purchased separately, see Accessories table. Standards Conforms to EN1088, EN60204 Standards Conforms to EN1088, EN60204.

Product Detail

New items

450201, IDEM

IDEM RAMZLOCK KLTM Solenoid Interlock Switch with Unique RFID Coding The RAMZLOCK KLTM-RFID series from IDEM are solenoid locking door switches with traditional mechanical anti-tamper tongue technology (CAM system) but which also incorporate uniquely coded RFID non contact sensor technology. These switches are ideal for preventing accidental or deliberate attempts to by-pass the interlock offering dual protection as both technologies must be satisfied to enable the machine to be started. Depending upon the risk assessment for the application, the RAMZLOCK can be used independently to provide positively operated contacts to IEC 60947-5-1 or can be used in combination with any dual channel safety monitoring relays to provide up to Category 4 PLe ISO 13849-1 or SIL3 EN62061. These RFID switches have a red painted diecast body and stainless steel head and have been developed with a holding force of 2000N to keep medium to large guard doors closed until hazards have been removed. They have a low profile and fixing holes are on an industry standard 73mm centre to enable easy retro fitting to new or existing guards. The KLTM-RFID safety switches fit to the leading edge of sliding or hinged machine guards and have been designed for use in the Factory Automation, Packaging, Food Processing, Pharmaceutical and Petro-Chemical industries. Integral high security RFID coding RFID antenna on front and end entries High holding force 2000N Spring to lock when actuator is inserted - energise solenoid to unlock 2 lock monitoring safety contacts for high function and diagnostic specification Auxiliary PNP outputs for switch status LED diagnostics for solenoid, lock and RFID 2 emergency manual release points Positive break contacts to IEC 60947-5-1 High functional safety to ISO 13849-1 Connects to most safety relays to give up to PLe Cat.4 IP67 protection 3 conduit entry points M20 Rugged red painted diecast body and stainle...

Product Detail

New items

XCSE5341, Telemecanique Sensors

XCSE Solenoid Interlock Switch Key operated lock to allow authorised override of solenoid (key supplied) 2 LED indicators (orange/guard open, green/guard closed, key in locked position) Heavy duty metal compact style to IP67 Turret heads can be rotated through 360° in 90 steps 8 actuator entries and 1 tapped entry Contact rating 24 Vac/6 A; 110 Vac/3 A; 230 Vac/2 A; 24 Vdc/0.5 A for 1000000 operations 20N minimum operating force for positive opening Productivity is increased due to the third contact dedicated to diagnostics Note Actuators must be purchased separately, see Accessories table. Standards Conforms to EN1088, EN60204 Standards Conforms to EN1088, EN60204.

Product Detail

New items

209001-PB, IDEM

IDEM HYGIELOCK Solenoid Interlock Switch The HYGIELOCK is a guard locking safety interlock switch that fits to the leading edge of sliding or hinged machine guards. It provides a lock mechanism to keep the guard closed until the hazard has been removed. It is tongue operated with positively operated switching contacts and a strong tamper resistant key mechanism. It provides robust position interlock detection for moving guards. This solenoid interlock switch can be used with safety timers to provide a delay before allowing the guard to open (for example machines that require a rundown). Depending upon the risk assessment for the application, it can be used independently to provide positively operated contacts to IEC 60947-5-1 or used with any dual channel safety monitoring relay to provide up to Category 4 PLe ISO 13849-1 or SIL3 EN62061.. Features and Benefits Power to unlock Rear manual release button, stock nos. 826-4013 , 826-4016 , 826-4019 Stainless steel 316 body and head 2 lock monitoring safety contacts for high function and diagnostic specification 2 emergency manual release points Positive break contacts to IEC 60947-5-1 High functional safety to ISO 13849-1 Rotatable head Connects to most safety relays to give up to PLe Cat.4 3 conduit entry points M20 LED status of solenoid applied power IP69K protection High holding force 2000 N 8 actuator entry positions 30 mm fixing centres Applications The HYGIELOCK solenoid interlock switch and has been designed for use in the Food Processing, Pharmaceutical, Packaging and Petrochemical industries. Note Not supplied with an actuator. Standard, flat, heavy duty flexible and hygienic actuators are available separately. The flexible actuators are perfect for tight radius guards. The hygienic actuator is made from stainless steel with a mirror polished finish. Standards ...

Product Detail

Solenoid Interlock Switches

New Items

201001, IDEM

XCSE7311, Telemecanique Sensors

XCSE5311, Telemecanique Sensors

XCSE7331, Telemecanique Sensors

XCSTE7311, Telemecanique Sensors

450001, IDEM

205001, IDEM

221301, IDEM

XCSE5511, Telemecanique Sensors

450201, IDEM

XCSE5341, Telemecanique Sensors

209001-PB, IDEM

FAQs