Digital Panel Voltmeters

New items

DPM 2000, Lascar

15mm, 3.5 Digit 15 Optional Symbols, Dual Rail Supply Display symbols pH, μ, %, kg, °F, °C, A, m, Ω, M, k, ∼, V, -, : Auto-ranging output connections Plugs directly into two 23-way 0.1in. pitch connectors Supplied with a snap-in bezel and window LCD 10 to 15mm Digit Height, Optional Symbols All these digital voltmeters have an operating temperature of 0 to + 50°C and feature selectable decimal points, auto polarity and auto zero. They can be converted to ammeters using a 200mV digital current shunt.

Product Detail

New items

DPM 700, Lascar

12.7mm, 3.5 Digit Green Back Lit Meter - Dual Rail Input Twelve optional symbols, V, m, A, °F, °C, μ, M, k, Ω, Hz, ∼,: Selectable decimal points (may be hard wired) Outputs available for auto-ranging applications Integral carrier and window, with separate mounting bezel Electrical connections via a row of solder pads on the PCB Backlight voltage; 5V and 9V Backlight current; 50mA and 20mA Functions as ammeter when used with a 200mV digital current shunt LCD 5.5 to 19mm Digit Height All have an operating temperature range of 0 to 50°C unless specified otherwise.

Product Detail

New items

DPM 40, Lascar

11mm, 3.5 Digit Meters User-programmable decimal points Auto zero, auto polarity Display hold Input leakage current: 10pA Resolution: 100μV Temperature stability: 150ppm/°C Functions as an ammeter when used with a 200mV digital current shunt H36 x W72 x D24.5mm Panel cut-out: 68 x 33mm Depth behind panel: 20.5mm LED, 11 to 19mm Digit Height All meters have an accuracy of ±0.1% ( ± 1 count).

Product Detail

New items

SGD 21-B, Lascar

Lascars SGD 21-B is a low-cost, ultra low-power single channel voltmeter with a sleek monochrome E Ink dotmatrix display. Using Lascars simple Panel Pilot software platform, choose from a selection of analogue and digital voltmeter apps and customise labels, scaling and alarms for your own specific application Readable in sunlightLow power/low cost solutionSimple set-up to customise your own application

Product Detail

New items

EMV 1025S-31, Lascar

12.5mm, 3.5 Digit 3-wire Voltmeter, Lascar EMV1025S EMV 1025S is an easy to mount LCD digital voltmeter. It features full scale reading, fitted to the panel by locating its screw threaded stud through the hole, adding the washer and tightening the nut provided. The module's connections pass through the hollow stud into the target application. Installation time is greatly reduced with only 3 wires to connect. The user need only drill a single 5.5mm hole in the panel. Single hole mounting 12.5mm LCD digit height Full scale reading with different versions: - 200mV - 2V - 20V - 200V - Different Decimal Point configurations 3-Wire connection Auto-zero, auto-polarity Low battery warning Splashproof Lascar, Single Hole Fixing LCD compact digital/virtual analogue indicators with common dimensions requiring a single 5.5mm diameter mounting hole unless specified otherwise. A rubber seal is included providing splash proof protection for the units when fitted to the meter during installation. All have an operating temperature range of 0°C to 50°C unless specified otherwise.

Product Detail

New items

DPM 500, Lascar

12.5mm, 3.5 Digit, Eleven Optional Symbols – Dual Rail Input Display symbols Ω, Hz, V, m, A, °F, °C, μ, M, k, ∼ Low battery indication Auto-ranging output connections Plugs directly into a 40-pin DIL socket Supplied with a snap-in bezel and window LCD 10 to 15mm Digit Height, Optional Symbols All these digital voltmeters have an operating temperature of 0 to + 50°C and feature selectable decimal points, auto polarity and auto zero. They can be converted to ammeters using a 200mV digital current shunt.

Product Detail

New items

DPM 750S-EB-W, Lascar

12.7mm 3.5 Digit LCD Voltmeter Module, Lascar DPM750S-EBEB The DPM 750S-EB features an enhanced black LCD and 200 mVdc measurement range with auto-zero and autopolarity. Decimal points are user selectable. The meter features a negative rail generator which enables the meter to measure a signal referenced to its own power supply GND. A low drift bandgap reference circuit ensures accurate readings over a wide temperature range. Enhanced contrast negative mode LCD with white LED backlighting ensures excellent readability under low light conditions. 12.7mm digit height LCD with LED backlighting in different colour 200 mVdc full scale reading 5 Vdc operation Auto-zero and Auto-polarity Programmable decimal points Enhanced black LCD with LED Backlighting Low battery warming Bandgap reference Supplied with a plastic mounting bezel Optional waterproof seal to IP67, stock-no. 446-2165 LCD 5.5 to 18 mm Digit Height

Product Detail

New items

EMV 1025S-11, Lascar

12.5mm, 3.5 Digit 3-wire Voltmeter, Lascar EMV1025S EMV 1025S is an easy to mount LCD digital voltmeter. It features full scale reading, fitted to the panel by locating its screw threaded stud through the hole, adding the washer and tightening the nut provided. The module's connections pass through the hollow stud into the target application. Installation time is greatly reduced with only 3 wires to connect. The user need only drill a single 5.5mm hole in the panel. Single hole mounting 12.5mm LCD digit height Full scale reading with different versions: - 200mV - 2V - 20V - 200V - Different Decimal Point configurations 3-Wire connection Auto-zero, auto-polarity Low battery warning Splashproof Lascar, Single Hole Fixing LCD compact digital/virtual analogue indicators with common dimensions requiring a single 5.5mm diameter mounting hole unless specified otherwise. A rubber seal is included providing splash proof protection for the units when fitted to the meter during installation. All have an operating temperature range of 0°C to 50°C unless specified otherwise.

Product Detail

New items

EMV 1025S-22, Lascar

12.5mm, 3.5 Digit 3-wire Voltmeter, Lascar EMV1025S EMV 1025S is an easy to mount LCD digital voltmeter. It features full scale reading, fitted to the panel by locating its screw threaded stud through the hole, adding the washer and tightening the nut provided. The module's connections pass through the hollow stud into the target application. Installation time is greatly reduced with only 3 wires to connect. The user need only drill a single 5.5mm hole in the panel. Single hole mounting 12.5mm LCD digit height Full scale reading with different versions: - 200mV - 2V - 20V - 200V - Different Decimal Point configurations 3-Wire connection Auto-zero, auto-polarity Low battery warning Splashproof Lascar, Single Hole Fixing LCD compact digital/virtual analogue indicators with common dimensions requiring a single 5.5mm diameter mounting hole unless specified otherwise. A rubber seal is included providing splash proof protection for the units when fitted to the meter during installation. All have an operating temperature range of 0°C to 50°C unless specified otherwise.

Product Detail

New items

APM-SHUNT-ANO, Trumeter

APM Shunt Meter Trumeter APM meters are the most visible, easy to use, multi-format, programmable panel meters on the market. The APM Shunt Meter is ideal for use in a range of applications where accurate DC current measurement is required. The programmable scale and custom annunciators mean that users can tailor the meter to display their critical parameters exactly how they want. The two outputs can be used to connect the shunt meter to other systems in the process, making this meter more than just a display. Features and Benefits Large 4-digit, 12 mm display Dynamic backlight colour User-adjustable backlight brightness and colour Wide viewing angle 40 segment bar graph display Separate Starburst display area for annunciators, custom messages and alarm information Custom annunciators 2 independent Alarm set-points 2 independent outputs Easy to use software by plugging into USB port on a PC 0-1 V dc input range 4-20 mA analogue monitor output IP65 (front panel) protection Applications Marine Leisure Material Handling Power Supplies Load Banks Charging systems Trumeter APM Digital Panel Volt Meter

Product Detail

New items

EMV 1025S-02, Lascar

12.5mm, 3.5 Digit 3-wire Voltmeter, Lascar EMV1025S EMV 1025S is an easy to mount LCD digital voltmeter. It features full scale reading, fitted to the panel by locating its screw threaded stud through the hole, adding the washer and tightening the nut provided. The module's connections pass through the hollow stud into the target application. Installation time is greatly reduced with only 3 wires to connect. The user need only drill a single 5.5mm hole in the panel. Single hole mounting 12.5mm LCD digit height Full scale reading with different versions: - 200mV - 2V - 20V - 200V - Different Decimal Point configurations 3-Wire connection Auto-zero, auto-polarity Low battery warning Splashproof Lascar, Single Hole Fixing LCD compact digital/virtual analogue indicators with common dimensions requiring a single 5.5mm diameter mounting hole unless specified otherwise. A rubber seal is included providing splash proof protection for the units when fitted to the meter during installation. All have an operating temperature range of 0°C to 50°C unless specified otherwise.

Product Detail

New items

DPM 125, Lascar

12.5mm, 3.5 Digit, Low Power Low battery power indication Logic selectable decimal point Digital hold version (stock no. 260-268 ) LED backlit version (stock no. 307-6375 ) Backlight voltage; 7.5V to 10V, backlight current; 60mA max. Extra large display in a miniature package Plugs directly into a 12-pin 0.1in pitch single in line socket Functions as ammeter when used with a 200mV digital current shunt Temperature stability zero drift 100 ppm/°C 7.5 - 14 Vdc operating voltage range Supplied with snap-in bezel and window. LCD 5.5 to 19mm Digit Height All have an operating temperature range of 0 to 50°C unless specified otherwise.

Product Detail

Digital Panel Voltmeters

New Items

DPM 2000, Lascar

DPM 700, Lascar

DPM 40, Lascar

SGD 21-B, Lascar

EMV 1025S-31, Lascar

DPM 500, Lascar

DPM 750S-EB-W, Lascar

EMV 1025S-11, Lascar

EMV 1025S-22, Lascar

APM-SHUNT-ANO, Trumeter

EMV 1025S-02, Lascar

DPM 125, Lascar

FAQs