PLC Accessories

New items

SWD4-RC8-10, Eaton

Eaton SmartWire Accessories Accessories for the Eaton SmartWire range including: SmartWire-DT Ribbon Cable Blade Terminal SWD4-8MF2 Bridging Device Plug Link Network Termination for SmartWire-DT Eaton SmartWire

Product Detail

New items

917-6395, RS PRO

Accessories RS Logic Controller are designed for use in automation for commercial & Industrial sectors. Controller with and without LCD screen available. Accessories for the Logic Controllers Memory Card, stock no. 917-6399 - Store the program - Transfer the program to other Logic Controllers Programming Cable, stock no. 917-6395 - For program download from PC USB port into Logic Controller Applications: - HVAC Controls - Machine Controls involving Motor, Pump and Valve - Vehicle Control Monitoring - Baggage handling - Conveyor systems and Elevators - Exhaust and Filtering Systems - Water-treatment plants - Printing and Packaging Machines - Interior and Exterior Lighting Control - Door, Gate, Shutter, Sun blinds and Awning control - Irrigation Control Systems - Automation of Compressors and Pumps for Air Conditioning requirements

Product Detail

New items

750315, Wago

Wago MODBUS Fieldbus Coupler The Wago Modbus Fieldbus coupler, RS 485/1,2 - 115,2k Baud allows connection of the WAGO-I/O-SYSTEM as a slave to the MODBUS or Fieldbus. It recognizes all the connected I/O modules and creates a local process image on this basis. Analogue and speciality module data is sent via words and/or bytes, digital data is sent bit by bit. It allows the storage of the process image in the corresponding Master control (PLC, PC or NC). Couplers series 750 Wago I/O system Range of couplers for analogue and digital signals Enables I/O connection to various protocols Modbus, Ethernet, Profibus and Interbus Configuration simplified with switches or rotary encoders The joint should be connected to the end of the loop, to guarantee the correct transmission of the data and enable the whole assembly to function correctly Wago I/O system range Remote I/O modular system for all functions Makes it easier to connect all I/Os thanks to its cage clamp system Communication with PC, PLCs because of the various communication protocols Colour codes according to the type of signal Features and Benefits DIN 35 rail, cage clamp connection Maximum number of I/O modules is 64 DIP switch and 2 decimal coder configuration Voltage supply is 24VDC Input current maximum is 500mA at 24V Isolation is 500V system/supply Operating temperature ranges between 0°C and 55°C Certifications IP20 rated CE EN 50082-2 (1996), EN 50081-1 (1993) cULus approved IEC 60068-2-6 IEC 60068-2-27

Product Detail

New items

CP1W-CN811, Omron

CP1L Accessories Omron CP1L CPU's, Expansion Modules and Accessories Omron's CP1L series offers the compactness of a micro-PLC with the capability of a modular PLC. The range is not only compact, it is scaleable too, and has a faster processing speed than other controllers.

Product Detail

New items

SWD4-SEL8-10, Eaton

Eaton SmartWire Accessories Accessories for the Eaton SmartWire range including: SmartWire-DT Ribbon Cable Blade Terminal SWD4-8MF2 Bridging Device Plug Link Network Termination for SmartWire-DT Eaton SmartWire

Product Detail

New items

750963, Wago

Wago CANopen Connector The Wago CANopen connector is an innovation that links a CANopen device to a CANopen line It has Buchse D-Sub 9 female connector. BUS connectors: Rewireable bus interface connectors are suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus), and Profibus systems. Compact and high quality, the 9-poles sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories. Available in versions with horizontal or vertical cable outlets Fast and reliable connection via screw terminals on the PCB Bus terminations include SMT termination resistors Colour-coded bodies aid installation and repair Safe ESD protection thanks to fully insulated housings Supplied with reliable crimp strain relief Features and Benefits Two horizontal cable entries: one input and one output Fast and maintenance‐free cage clamp connection can be held in the open position with the help of an actuation slide mechanism Externally operable switch to activate and/or deactivate the network terminating resistor Enables the quick, easy connection of incoming and outgoing bus lines Baud rate:1Mbit/s Supply voltage: 4.75VDC to 5.25VDC Operating temperature ranges between 0°C and 60°C Certifications IP20 rated IEC 60068-2-6 cULus 508 approved TUV certified EN 60079-0 IEC 60079-0

Product Detail

New items

750970, Wago

Profibus and CANopen connectors Range of connectors for field bus with 9 male and/or female pins, specially designed for Profibus and CANopen systems. Enables quick, easy connection of incoming and outgoing bus lines. Used for transmission speeds of up to 12 Mbit/s. An external switch is used to activate/deactivate the terminal resistor. The 750-970 version corresponds to a Profibus connector and has male and female sockets for stacking. Wago Fieldbus Connector The Wago Fieldbus connector is an innovation that links a PROFIBUS device to a PROFIBUS line. It has Stecker 9-Pin D-sub male and female connector. BUS connectors : Rewireable bus interface connectors are suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories. Available in versions with horizontal or vertical cable outlets Fast and reliable connection via screw terminals on the PCB Bus terminations include SMT termination resistors Colour-coded bodies aid installation and repair Safe ESD protection thanks to fully insulated housings Supplied with reliable crimp strain relief Features and Benefits • Two horizontal cable entries: one input and one output • Fast and maintenance‐free cage clamp connection can be held in the open position with the help of an actuation slide mechanism • Externally operable switch to activate and/or deactivate the network terminating resistor • PG interface • Enables the quick, easy connection of incoming and outgoing bus lines • Baud rate: up to 12Mbps • Supply voltage: 4.75VDC to 5.25V DC • Operating temperature ranges between 0°C a...

Product Detail

New items

799213, ABB

Terminal block screwless PE 20x1,5-4mm²+6x25mm²

Product Detail

New items

88970104, Crouzet

Product Detail

New items

750960, Wago

Wago Fieldbus Connector The Wago Fieldbus connector is an innovation that links a PROFIBUS device to a PROFIBUS line. It has a Stecker 9-Pin D-sub male connector. BUS connectors: Rewireable bus interface connectors are suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus), and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories. Available in versions with horizontal or vertical cable outlets Fast and reliable connection via screw terminals on the PCB Bus terminations include SMT termination resistors Colour-coded bodies aid installation and repair Safe ESD protection thanks to fully insulated housings Supplied with reliable crimp strain relief Features and Benefits Two horizontal cable entries: one input and one output Fast and maintenance‐free cage clamp connection can be held in the open position with the help of an actuation slide mechanism Externally operable switch to activate and/or deactivate the network terminating resistor Enables the quick, easy connection of incoming and outgoing bus lines Baud rate: 12Mbps Supply voltage: 4.75VDC to 5.25VDC Operating temperature ranges between 0°C and 60°C Certifications IP20 rated IEC 60068-2-6 cULus 508 approved TUV certified EN 60079-0 IEC 60079-0

Product Detail

New items

750316, Wago

Couplers series 750 Wago I/O system Range of couplers for analogue and digital signals. Enables I/O connection to various protocols Modbus, Ethernet, Profibus and Interbus. Configuration simplified with switches or rotary encoders. The joint should be connected to the end of the loop, to guarantee correct transmission of the data and enable the whole assembly to function correctly. Wago I/O system range Remote I/O modular system for all functions. Makes it easier to connect all I/Os thanks to its Cage clamp system® Communication with PC, PLCs thanks to the various communication protocols. Colour codes according to type of signal. Do not forget to order the end module ( 508-3959 )

Product Detail

New Items

SWD4-RC8-10, Eaton

917-6395, RS PRO

750315, Wago

CP1W-CN811, Omron

SWD4-SEL8-10, Eaton

750963, Wago

750970, Wago

799213, ABB

88970104, Crouzet

750960, Wago

750316, Wago

FAQs