D-sub Connector Backshells

New items

5745653-3, TE Connectivity

AMPLIMITE D-Sub Connector, HDE, HDP Series RFI/EMI 90 Degree Exit Die Cast Shielded Backshells AMPLIMITE RFI/EMI shielded die cast 90° exit, two-piece backshell or cable clamp kits for use with HDE Metal-Shell and HDP Metal-Shell (tin plated only) d-sub cable connectors with a variety of cable diameter sizes (please see table for details). These AMPLIMITE RFI/EMI shielded two-piece backshells have nickel over copper plated zinc alloy shields and are supplied with 3 x zinc plated steel 4-40 pan head screws and 2 x latch head screws and a stainless steel one-piece slide-latch. For suitable ferrules see stock numbers 717-4653 , 745-5791 and 680-9383 typically. TE Connectivity AMPLIMITE D-Subminiature Connectors

Product Detail

New items

5207908-1, TE Connectivity

AMPLIMITE D-Sub Connector, HDP Series, Unshielded Box and Lid Backshells with Male Retainer Screws AMPLIMITE unassembled hinged box and lid unshielded cable clamps or backshell kits with a 180 and 90° exit. These AMPLIMITE box and lid unshielded backshells have black thermoplastic housings with a textured finish, black thermoplastic gates, black zinc plated steel flat head screws, zinc plated yellow chromate steel male screw retainers and steel retaining clips. The cable diameter of these AMPLIMITE box and lid backshells can be adjusted by changing the cable support gates. The flat side of the cable support gates are for use with discrete wire and the semicircle side for use with jacketed cable. These AMPLIMITE backshells are for use with HDP Metal- Shell series d-sub connectors. TE Connectivity AMPLIMITE D-Subminiature Connectors

Product Detail

New items

5748678-1, TE Connectivity

AMPLIMITE D-Sub Connector, Series HDP, HDE, Straight Exit, 2 Piece Backshells Straight exit, two-piece unassembled backshells or cable clamp kits made from black ABS with 2 x zinc plated steel 4-40 fillister head screws, 2 x hex nuts and 2 x 4-40 mounting screws. These straight exit, two-piece AMPLIMITE backshells are for use with HDE Metal-Shell and HDP-Metal Shell d-sub connectors. Backshell kits 680-9361 and 717-4596 are supplied with 4 grommets Backshell kits 680-9370 , 680-9373 AND 782-6171 are supplied with 6 grommets For 2 piece spring latch see stock number 450-9321 TE Connectivity AMPLIMITE D-Subminiature Connectors

Product Detail

New items

MHDM9-K, MH Connectors

MH Connectors MHDM Series The MHDM range of Die-Cast Zinc Hoods from the MH MHulti Hood series feature a two piece zinc body with two body retaining screws. The MHulti series hood systems are designed with the assembler in mind, the internal cable retainer holds the cable in place while the rest of the hood is assembled providing quick and easy use. The MHDM series is supplied with a metallised grommet kit and clamp. 2-piece die-cast hoods Exceptional RFI/EMI shielding Designed for quick and easy assembly of cable to hood Cable is held in place whilst the rest of the assembly is completed Metallised plastic bushing insert provides maximum 360° shielding at the critical cable entry point Simple removal of the inserts allow for rework or maintenance

Product Detail

New items

3485-2400F, 3M

Flat Cable Plastic Backshells For use with flat ribbon cable D connectors, see stock nos. 121-0040 and 121-0107 For suitable jackscrews see RS stock No. 120-8407

Product Detail

New items

5745172-1, TE Connectivity

AMPLIMITE D-Sub Connector, Series HDE, HDP RFI/EMI Straight Exit Shielded Backshells AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits or cable clamps with die cast or metal plated plastic shields for use with HDE Metal-Shell and HDP Metal-Shell (tin plated only) d-sub cable mount connectors. These AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits accept a variety of shell sizes and cable diameters, please see table for details. Part numbers 5745171-x , 5745172-x , 5747173-x , 5745174-x and 5745175-x have zinc alloy shields plated with bright nickel over bright copper. Part numbers 5745854-x , 5747099-x , 5745833-x , 5747100-x and 5748677-x have thermoplastic shields plated with nickel over copper. Each kit also contains zinc plated stainless steel 4-4- fillister head screws, hex nuts and 4-40 mounting screws. Stock number 680-9355 is also supplied with 4 grommets. For ferrules see stock numbers 718-0730 , 745-5791 and 680-9383 typically For two piece spring latch see stock number 450-9321 Note Jackscrews must be purchased separately Shielded backshells will not accept connector housings with clinch nuts TE Connectivity AMPLIMITE D-Subminiature Connectors

Product Detail

New items

749608-2, TE Connectivity

Our reliable AMPLIMITE D-sub .050 series connector portfolio oﬀers a high density D type interface and includes right angle and vertical D-subs. Both versions have three mating faces available: flat face, latch block and latch block with rails. Plug and receptacle positions include 20, 26, 28, 40, 50, 68, 80, 100 and 120 (ACTION PIN only). AMPLIMITE .050 Series connectors utilize gold plated tab and tuning fork contacts on a compact .050 x .100 grid spacing and are available with 20 to 100 positions. The AMPLIMITE .050 series cable connectors terminate to wire via the insulation displacement contact (IDC) termination method, which provides fast, reliable and economical termination of discrete wire or ribbon cable. Both solder, and compliant pin terminations are oﬀered on the printer circuit board versions. All connectors are produced with metal shell construction, which provides EMI/ RFI shielding capability and high durability.

Product Detail

New items

970-015-030R121, Norcomp

Top Entry D-Sub Backshells available in 4 industry sizes/positions: Standard (9, 15, 25, 37) or High Density (15, 26, 44, 62) Thumbscrews supplied with backshell. More robust design for those areas that need it. Fully tapped assembly holes allow easy assembly keeping manufacturing cost down. 2 pc. grommet with various I.D.s included. Perimeter sealing lips for secure assembly. Available in die cast with 2 different plating options: Nickel & Black Also available in Metalized plastic and plastic versions. Die Cast: Lightweight Zinc Plating: Nickel over copper or black die cast Metalized Plastic: High temperature plastic Plating: Nickel over copper Plastic: High temperature plastic , Black Hardware: Steel with nickel or black chromate

Product Detail

New items

979-015-030R121, Norcomp

180° Top Entry available in 5 industry sizes/positions: Standard (9, 15, 25, 37, 50) or High Density (15, 26, 44, 62, 78) Not compatible with 170 Crimp or 180 crimp series 4-40 mating hardware supplied with backshell. Perimeter sealing lips for secure sealing. Available in die cast, metalized plastic and plastic. Cost effective backshell. Easy assembly reduces manufacturing cost. Strain Relief design ensures secure fit no matter what cable diameter is used. Grommet tree supplied - various sizes. Die Cast: Zinc Alloy Ingot. Plating: Nickle over copper Metalized Plastic: High temperature Plating: Chrome Plastic: High temperature plastic Hardware: Steel, nickel plating

Product Detail

New items

981-009-130R121, Norcomp

Right Angle D-Sub Backshell | Ethernet 90° Entry available in: Standard (9 pin, 15 pin, 25 pin) or High Density (15 pin, 26 pin, 44 pin) Available in die cast for over 70 dB shielding. Easy backshell assembly reduces manufacturing cost. Non-conductive grommet/strain relief supplied to enhance shielding and provide proper strain relief. Slide locks and posts must be purchased separately. Die Cast D-sub Backshell: Zinc Alloy Ingot Plating: Nickel over copper Hardware: Steel, nickel plating

Product Detail

New items

1393738-2, TE Connectivity

D-Sub Connector Cable Clamp Backshells 45 Degree A range of D-sub connector 45 degree cable clamp backshells, shielded and unshielded versions. Note These backshells are not supplied with Jack screws and the suitable jack screws are stock number 717-4521 . TE Connectivity AMPLIMITE D-Subminiature Connectors

Product Detail

New items

MHDM25-K, MH Connectors

MH Connectors MHDM Series The MHDM range of Die-Cast Zinc Hoods from the MH MHulti Hood series feature a two piece zinc body with two body retaining screws. The MHulti series hood systems are designed with the assembler in mind, the internal cable retainer holds the cable in place while the rest of the hood is assembled providing quick and easy use. The MHDM series is supplied with a metallised grommet kit and clamp. 2-piece die-cast hoods Exceptional RFI/EMI shielding Designed for quick and easy assembly of cable to hood Cable is held in place whilst the rest of the assembly is completed Metallised plastic bushing insert provides maximum 360° shielding at the critical cable entry point Simple removal of the inserts allow for rework or maintenance

Product Detail

D-sub Connector Backshells

New Items

5745653-3, TE Connectivity

5207908-1, TE Connectivity

5748678-1, TE Connectivity

MHDM9-K, MH Connectors

3485-2400F, 3M

5745172-1, TE Connectivity

749608-2, TE Connectivity

970-015-030R121, Norcomp

979-015-030R121, Norcomp

981-009-130R121, Norcomp

1393738-2, TE Connectivity

MHDM25-K, MH Connectors

FAQs