Conformal Coatings

Acrylic Conformal Coating Specially developed to protect printed circuit boards from the effects of environmental attack, protects against inorganic acid and caustic vapours. Prevents electrical leakage and short circuits Provides a quick drying and transparent, flexible protective coating Operational temperature range of -40°C to +60°C (provides short term protection to 100°C) Can also be used as extra insulation on coils and transformers Touch dry in 20 minutes (at 20°C) Ambersil Conformal Coating The Ambersil 400ml conformal coating is transparent, quick-drying, insulating, and protective coating based on acrylic resins. It is a low viscosity solvent-drying, acrylic based conformal coating with excellent insulating properties. This coating prevents printed circuit boards and surfaces from a humid inorganic acid or caustic vapours. Features and Benefits • Prevents electrical leakage and short circuits • Operational temperature ranges between -40°C and 60°C • Touch dry in 20 minutes (at 20°C) • Can also be used as extra insulation on coils and transformers • Viscosity bulk is 10mPas-20mPas • Drying time at 20°C (dry to touch) is ±20 minutes Applications • Electronics • PCBs •

Modified Silicone Conformal Coating The RS Pro modified silicone conformal coating, specially formulated the protection of your electronic circuits. Once cured, it is resistant to a wide range of solvents, lubricants and cooling fluids putting your mind at ease. All models are highly reliable and excellent quality. Features & Benefits Excellent resistance to mould growth UV light and to prolonged tropical exposure/salt spray Low oxygen permeability Provides excellent in-service protection for circuitry and PCBs at a typical coating thickness of 0·025-0·05mm Clear coating is approved to DEF STAN 59//47 issue 4 and UL 746C-QMJU2 Approvals DEF, STAN, UL

ERSC300IRP Silicone Resin 250g Optically clear, flexible two part encapsulating compound Ideal for use in the LED industry where optical clarity is vital Suited for applications where thin films are required Moisture cure nature Low viscosity Excellent electrical properties Wide temperature range Chemical and water resistance Standards RoHS Compliant Electrolube Encapsulation Resin The Gems Sensors float switch is designed for higher temperatures and in pressurized or corrosive liquids. It is an exceptionally accurate and rugged switch. It has mounting thread G1/4in Warning: The cable entry point must not be submerged under any circumstances They must be fitted through the wall of a tank on the horizontal switches so that the cable is on the outside On the vertical type, the mounting thread and cable entry must be above the highest level of the liquid Features and Benefits • Moisture cure nature • Low viscosity • Excellent electrical properties • Wide temperature range • Excellent chemical and water resistance • Operating temperature ranging between -60⁰C and 200⁰C Applications • Electronic industries • Electrical industries Certifications • ANSI/ESD S20.20:2014 • BS EN 61340-5-1:2007 Standards RoHS Compliant

Modified Silicone Conformal Coating The RS Pro modified silicone conformal coating, specially formulated the protection of your electronic circuits. Once cured, it is resistant to a wide range of solvents, lubricants and cooling fluids putting your mind at ease. All models are highly reliable and excellent quality. Features & Benefits Excellent resistance to mould growth UV light and to prolonged tropical exposure/salt spray Low oxygen permeability Provides excellent in-service protection for circuitry and PCBs at a typical coating thickness of 0·025-0·05mm Clear coating is approved to DEF STAN 59//47 issue 4 and UL 746C-QMJU2 Approvals DEF, STAN, UL

FSC - Flexible Silicone Coating A transparent silicone coating designed to protect printed circuit boards, which can be easily removed with most common solvents. Quick-drying silicone conformal coating suitable for printed circuit boards Based on high-quality silicon resin with excellent adhesion to a variety of substrates Excellent resistance to mould growth, UV light and exposure to tropical conditions Good dielectric properties Very high surface resistivity High protective effect in a humid environment Excellent adhesion to a wide variety of substrates Can be soldered through for rework Temperature range -50°C to +125°C Cured protective varnish can be removed using Electrolube Ultrasolve, order no. 101-4965 Boards should be clean and pre-dried or vacuum desiccated before application of the coating. Standards IEC-61086 Electrolube Flexible Silicone Coating The Electrolube 400ml flexible silicone coating is a specialist conformal coating that is formulated based on high-quality silicone resin. It is highly flexible for delicate components, while it exhibits excellent adhesion to a wide variety of substrates and operates within a wide temperature range. It is an ideal choice for humid environments offering excellent protection from moisture. It can be sprayed, dipped or brushed and is fast-drying, allowing for efficient production while it also contains a UV trace that allows inspection of the PCB after coating to ensure complete and even coverage. Features and Benefits • Very high surface insulation resistance • Wide operating temperature range • Good dielectric properties • Very high surface resistivity • High level of protection offered in humid environments • May be removed with solvents such as ultra solve (ULS) • May be soldered through for rework • Viscosity at 20°C is 550m...