Replacement Gland and Grease Kits (Packing Boxes)
The replacement packing box (gland kit) 06269203 (RS
795-9508
) is for the following Schneider MZ Valves:
BAMZ3402
BAMZ3452
BAMZ3501
BAMZ3551
BAMZ3601
BAMZ3651
MJF
The replacement packing box (gland kit) 06269311 (RS
795-9502
) is for the following Satchwell/Schneider three-port seat valve:
MZF
Valve Actuators - Schneider Electric
Schneider Modulating Damper Actuator MD20A-24
Schneider MD20A-24 damper actuator for operating air control dampers in ventilation and air conditioning systems for building services installations.
For air control dampers up to approx. 4 m²
Torque 20 Nm (180 in-lb)
Nominal voltage AC/DC 24 V
Control: Modulating 0 – 10 V
Position feedback: 2 – 10 V
Schneider On/Off or 3 Point Damper Actuators MD20B-24V/-230V
Schneider MD20B Series 24V and 230V damper actuators for operating air control dampers in ventilation and air-conditioning systems for building services installations
For air control dampers up to approximately 4m²
Torque: 20 Nm (180 in-lb)
Nominal voltage: AC/DC 24V (
795-9467
) or 230V (
795-9445
)
Control: On/Off or 3-point
Note
These MD20B actuators require linkage kit LMD/AR-MBF Part No 914-1070-000 (RS
795-9505
) when used with MBF 3-port flanged rotary shoe valves.
LMD/AR-MB and LMD/AR-MBF Linkages for MD/AR Actuators
795-9505
is a linkage kit (LMD/AR-MBF Part No. 914-1070-000) for the MD20B damper actuators (
795-9467
and
795-9445
) for use with the MBF 3 port flanged rotary shoe valve.
795-9495
is a linkage kit (LMD/AR-MB Part No. 914-1071-000) for the MD10B damper actuator for use with the MB 3 port screwed rotary shoe valve.
Schneider MZ20B Electro-Mechanical Zone Actuator
MZ20B is an electro-mechanical actuator designed to provide floating increase/decrease control together with Schneider small linear zone valves VZ29/VZ39/VZ49.
Input Voltage 24 Vac
Power consumption 0.5 VA
Speed 18 s/mm @50Hz; 15 s/mm @ 60Hz
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Damper Actuators and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Damper Actuators or any other product.
This depends on the Damper Actuators individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Damper Actuators and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Damper Actuators.
Yes. We keep updating our stock frequently and if a product like Damper Actuators is not in stock then we will let you know.