Fluorescent Tubes

New items

1532, Sylvania

Triphosphor T8 - Sylvania Luxline® Plus A new generation of triphosphor coated fluorescent tubes. Using T8 triphosphor tubes in place of T12 and T8 halophosphor tubes increases light levels and lamp life by up to 20000 hours, when used with electronic control gear. In addition, these T8 tubes provide improved colour rendering performance, reduced maintenance and energy costs. These lights start instantly with brighter lighting compared to standard fluorescent tubes. Features & Benefits High light output and almost constant lumen maintenance throughout life High colour rendering (Ra85/Class 1B) Consumes 10% less energy than comparable 38 mm fluorescent tubes Operates on conventional and electronic ballasts Product Application Information Cost effective and reliable. Easy to install and give instant light without compromise on luminosity. Well suited for garages, workshops and businesses. Fluorescent Triphosphor Triphosphor tubes have longer life, a lower mercury content, better colour rendering and higher lumen maintenance than their Halophosphate counterparts. The tubes are available in a variety of colour temperatures from 3000K (warm white) to 6000K (daylight). Extended life expectancy which can be increased by upto 20,000 hours with the use of high frequency luminaires. Shatter resistant versions available which retain the fragments in the event of a breakage. Option of triphosphor tubes with internal reflectors, which reduce waste light and increase light output by up to 75%. 16mm (T5) tubes provide a compact alternative to T8 tubes, offering peak performance at +35 °C and typically provide 5% more efficiency in most ceiling applications when compared to equivalent T8 tubes. Note Nominal tube diameter - T5=16mm, T8=26mm, T9=29mm, T12=38mm

Product Detail

New items

581, Sylvania

Triphosphor T8 - Sylvania Luxline® Plus A new generation of triphosphor coated fluorescent tubes. Using T8 triphosphor tubes in place of T12 and T8 halophosphor tubes increases light levels and lamp life by up to 20000 hours, when used with electronic control gear. In addition, these T8 tubes provide improved colour rendering performance, reduced maintenance and energy costs. These lights start instantly with brighter lighting compared to standard fluorescent tubes. Features & Benefits High light output and almost constant lumen maintenance throughout life High colour rendering (Ra85/Class 1B) Consumes 10% less energy than comparable 38 mm fluorescent tubes Operates on conventional and electronic ballasts Product Application Information Cost effective and reliable. Easy to install and give instant light without compromise on luminosity. Well suited for garages, workshops and businesses. Fluorescent Triphosphor Triphosphor tubes have longer life, a lower mercury content, better colour rendering and higher lumen maintenance than their Halophosphate counterparts. The tubes are available in a variety of colour temperatures from 3000K (warm white) to 6000K (daylight). Extended life expectancy which can be increased by upto 20,000 hours with the use of high frequency luminaires. Shatter resistant versions available which retain the fragments in the event of a breakage. Option of triphosphor tubes with internal reflectors, which reduce waste light and increase light output by up to 75%. 16mm (T5) tubes provide a compact alternative to T8 tubes, offering peak performance at +35 °C and typically provide 5% more efficiency in most ceiling applications when compared to equivalent T8 tubes. Note Nominal tube diameter - T5=16mm, T8=26mm, T9=29mm, T12=38mm

Product Detail

New items

1394, Sylvania

Triphosphor T8 - Sylvania Luxline® Plus A new generation of triphosphor coated fluorescent tubes. Using T8 triphosphor tubes in place of T12 and T8 halophosphor tubes increases light levels and lamp life by up to 20000 hours, when used with electronic control gear. In addition, these T8 tubes provide improved colour rendering performance, reduced maintenance and energy costs. These lights start instantly with brighter lighting compared to standard fluorescent tubes. Features & Benefits High light output and almost constant lumen maintenance throughout life High colour rendering (Ra85/Class 1B) Consumes 10% less energy than comparable 38 mm fluorescent tubes Operates on conventional and electronic ballasts Product Application Information Cost effective and reliable. Easy to install and give instant light without compromise on luminosity. Well suited for garages, workshops and businesses. Fluorescent Triphosphor Triphosphor tubes have longer life, a lower mercury content, better colour rendering and higher lumen maintenance than their Halophosphate counterparts. The tubes are available in a variety of colour temperatures from 3000K (warm white) to 6000K (daylight). Extended life expectancy which can be increased by upto 20,000 hours with the use of high frequency luminaires. Shatter resistant versions available which retain the fragments in the event of a breakage. Option of triphosphor tubes with internal reflectors, which reduce waste light and increase light output by up to 75%. 16mm (T5) tubes provide a compact alternative to T8 tubes, offering peak performance at +35 °C and typically provide 5% more efficiency in most ceiling applications when compared to equivalent T8 tubes. Note Nominal tube diameter - T5=16mm, T8=26mm, T9=29mm, T12=38mm

Product Detail

New items

580, Sylvania

Triphosphor T8 - Sylvania Luxline® Plus A new generation of triphosphor coated fluorescent tubes. Using T8 triphosphor tubes in place of T12 and T8 halophosphor tubes increases light levels and lamp life by up to 20000 hours, when used with electronic control gear. In addition, these T8 tubes provide improved colour rendering performance, reduced maintenance and energy costs. These lights start instantly with brighter lighting compared to standard fluorescent tubes. Features & Benefits High light output and almost constant lumen maintenance throughout life High colour rendering (Ra85/Class 1B) Consumes 10% less energy than comparable 38 mm fluorescent tubes Operates on conventional and electronic ballasts Product Application Information Cost effective and reliable. Easy to install and give instant light without compromise on luminosity. Well suited for garages, workshops and businesses. Fluorescent Triphosphor Triphosphor tubes have longer life, a lower mercury content, better colour rendering and higher lumen maintenance than their Halophosphate counterparts. The tubes are available in a variety of colour temperatures from 3000K (warm white) to 6000K (daylight). Extended life expectancy which can be increased by upto 20,000 hours with the use of high frequency luminaires. Shatter resistant versions available which retain the fragments in the event of a breakage. Option of triphosphor tubes with internal reflectors, which reduce waste light and increase light output by up to 75%. 16mm (T5) tubes provide a compact alternative to T8 tubes, offering peak performance at +35 °C and typically provide 5% more efficiency in most ceiling applications when compared to equivalent T8 tubes. Note Nominal tube diameter - T5=16mm, T8=26mm, T9=29mm, T12=38mm

Product Detail

New items

1530, Sylvania

Triphosphor T8 - Sylvania Luxline® Plus A new generation of triphosphor coated fluorescent tubes. Using T8 triphosphor tubes in place of T12 and T8 halophosphor tubes increases light levels and lamp life by up to 20000 hours, when used with electronic control gear. In addition, these T8 tubes provide improved colour rendering performance, reduced maintenance and energy costs. These lights start instantly with brighter lighting compared to standard fluorescent tubes. Features & Benefits High light output and almost constant lumen maintenance throughout life High colour rendering (Ra85/Class 1B) Consumes 10% less energy than comparable 38 mm fluorescent tubes Operates on conventional and electronic ballasts Product Application Information Cost effective and reliable. Easy to install and give instant light without compromise on luminosity. Well suited for garages, workshops and businesses. Fluorescent Triphosphor Triphosphor tubes have longer life, a lower mercury content, better colour rendering and higher lumen maintenance than their Halophosphate counterparts. The tubes are available in a variety of colour temperatures from 3000K (warm white) to 6000K (daylight). Extended life expectancy which can be increased by upto 20,000 hours with the use of high frequency luminaires. Shatter resistant versions available which retain the fragments in the event of a breakage. Option of triphosphor tubes with internal reflectors, which reduce waste light and increase light output by up to 75%. 16mm (T5) tubes provide a compact alternative to T8 tubes, offering peak performance at +35 °C and typically provide 5% more efficiency in most ceiling applications when compared to equivalent T8 tubes. Note Nominal tube diameter - T5=16mm, T8=26mm, T9=29mm, T12=38mm

Product Detail

New items

1512, Sylvania

Triphosphor T8 - Sylvania Luxline® Plus A new generation of triphosphor coated fluorescent tubes. Using T8 triphosphor tubes in place of T12 and T8 halophosphor tubes increases light levels and lamp life by up to 20000 hours, when used with electronic control gear. In addition, these T8 tubes provide improved colour rendering performance, reduced maintenance and energy costs. These lights start instantly with brighter lighting compared to standard fluorescent tubes. Features & Benefits High light output and almost constant lumen maintenance throughout life High colour rendering (Ra85/Class 1B) Consumes 10% less energy than comparable 38 mm fluorescent tubes Operates on conventional and electronic ballasts Product Application Information Cost effective and reliable. Easy to install and give instant light without compromise on luminosity. Well suited for garages, workshops and businesses. 0001512 Fluorescent Tube 0001512 is a 36 watt T8 fluorescent tube with a G13 cap. It is a daylight colour with a colour temperature rating of 6500 K. This fluorescent lamp creates luminous flux of 3250 lumens (lm) and has a colour rendering index rating (Ra) of 85. This fluorescent tube meets EU energy efficiency class A requirements and has energy consumption of 43 kWh/1000h. Fluorescent Triphosphor Triphosphor tubes have longer life, a lower mercury content, better colour rendering and higher lumen maintenance than their Halophosphate counterparts. The tubes are available in a variety of colour temperatures from 3000K (warm white) to 6000K (daylight). Extended life expectancy which can be increased by upto 20,000 hours with the use of high frequency luminaires. Shatter resistant versions available which retain the fragments in the event of a breakage. Option of triphosphor tubes with int...

Product Detail

New items

2782, Sylvania

Triphosphor T5 - Sylvania Luxline® Plus FHO (Fluorescent High Output) A new generation of triphosphor High Output slim linear fluorescent tubes. The T5 Luxline Plus triphosphor lamp is the ideal solution for indirect and direct industrial lighting systems with high ceilings. They offer good colorimetric, photometric and lumen maintenance. Particularly suitable for use in the new low profile recessed and suspended luminaires and modular systems. Almost constant lumen maintenance throughout the entire life of the lamp due to Luxline Plus triphosphor technology High colour rendering (Ra85/Class1B) For applications where a hugh luminous flux is required (upto 7000 lm per lamp) For electronic ballast operation only Optimised ambient operating temperature at 35° C (max. lumen output) allows compact luminaire designs Average rated life: up to 24000 hours 0002782 Fluorescent Tube 0002782 is a 54 watt T5 fluorescent tube with a G5 cap. It is a cool white colour with a colour temperature rating of 4000 K. This fluorescent lamp creates luminous flux of 4450 lumens (lm) and has a colour rendering index rating (Ra) of 85. This fluorescent tube meets EU energy efficiency class A+ requirements and has energy consumption of 60 kWh/1000h. Fluorescent Triphosphor Triphosphor tubes have longer life, a lower mercury content, better colour rendering and higher lumen maintenance than their Halophosphate counterparts. The tubes are available in a variety of colour temperatures from 3000K (warm white) to 6000K (daylight). Extended life expectancy which can be increased by upto 20,000 hours with the use of high frequency luminaires. Shatter resistant versions available which retain the fragments in the event of a breakage. Option of triphosphor tubes with internal reflectors, which reduce waste light and increase light output by u...

Product Detail

New items

2764, Sylvania

Triphosphor T5 - Sylvania Luxline® Plus FHO (Fluorescent High Output) A new generation of triphosphor High Output slim linear fluorescent tubes. The T5 Luxline Plus triphosphor lamp is the ideal solution for indirect and direct industrial lighting systems with high ceilings. They offer good colorimetric, photometric and lumen maintenance. Particularly suitable for use in the new low profile recessed and suspended luminaires and modular systems. Almost constant lumen maintenance throughout the entire life of the lamp due to Luxline Plus triphosphor technology High colour rendering (Ra85/Class1B) For applications where a hugh luminous flux is required (upto 7000 lm per lamp) For electronic ballast operation only Optimised ambient operating temperature at 35° C (max. lumen output) allows compact luminaire designs Average rated life: up to 24000 hours Fluorescent Triphosphor Triphosphor tubes have longer life, a lower mercury content, better colour rendering and higher lumen maintenance than their Halophosphate counterparts. The tubes are available in a variety of colour temperatures from 3000K (warm white) to 6000K (daylight). Extended life expectancy which can be increased by upto 20,000 hours with the use of high frequency luminaires. Shatter resistant versions available which retain the fragments in the event of a breakage. Option of triphosphor tubes with internal reflectors, which reduce waste light and increase light output by up to 75%. 16mm (T5) tubes provide a compact alternative to T8 tubes, offering peak performance at +35 °C and typically provide 5% more efficiency in most ceiling applications when compared to equivalent T8 tubes. Note Nominal tube diameter - T5=16mm, T8=26mm, T9=29mm, T12=38mm

Product Detail

New items

2761, Sylvania

Triphosphor T5 - Sylvania Luxline® Plus FHO (Fluorescent High Output) A new generation of triphosphor High Output slim linear fluorescent tubes. The T5 Luxline Plus triphosphor lamp is the ideal solution for indirect and direct industrial lighting systems with high ceilings. They offer good colorimetric, photometric and lumen maintenance. Particularly suitable for use in the new low profile recessed and suspended luminaires and modular systems. Almost constant lumen maintenance throughout the entire life of the lamp due to Luxline Plus triphosphor technology High colour rendering (Ra85/Class1B) For applications where a hugh luminous flux is required (upto 7000 lm per lamp) For electronic ballast operation only Optimised ambient operating temperature at 35° C (max. lumen output) allows compact luminaire designs Average rated life: up to 24000 hours Fluorescent Triphosphor Triphosphor tubes have longer life, a lower mercury content, better colour rendering and higher lumen maintenance than their Halophosphate counterparts. The tubes are available in a variety of colour temperatures from 3000K (warm white) to 6000K (daylight). Extended life expectancy which can be increased by upto 20,000 hours with the use of high frequency luminaires. Shatter resistant versions available which retain the fragments in the event of a breakage. Option of triphosphor tubes with internal reflectors, which reduce waste light and increase light output by up to 75%. 16mm (T5) tubes provide a compact alternative to T8 tubes, offering peak performance at +35 °C and typically provide 5% more efficiency in most ceiling applications when compared to equivalent T8 tubes. Note Nominal tube diameter - T5=16mm, T8=26mm, T9=29mm, T12=38mm

Product Detail

New items

2767, Sylvania

Triphosphor T5 - Sylvania Luxline® Plus FHO (Fluorescent High Output) A new generation of triphosphor High Output slim linear fluorescent tubes. The T5 Luxline Plus triphosphor lamp is the ideal solution for indirect and direct industrial lighting systems with high ceilings. They offer good colorimetric, photometric and lumen maintenance. Particularly suitable for use in the new low profile recessed and suspended luminaires and modular systems. Almost constant lumen maintenance throughout the entire life of the lamp due to Luxline Plus triphosphor technology High colour rendering (Ra85/Class1B) For applications where a hugh luminous flux is required (upto 7000 lm per lamp) For electronic ballast operation only Optimised ambient operating temperature at 35° C (max. lumen output) allows compact luminaire designs Average rated life: up to 24000 hours Fluorescent Triphosphor Triphosphor tubes have longer life, a lower mercury content, better colour rendering and higher lumen maintenance than their Halophosphate counterparts. The tubes are available in a variety of colour temperatures from 3000K (warm white) to 6000K (daylight). Extended life expectancy which can be increased by upto 20,000 hours with the use of high frequency luminaires. Shatter resistant versions available which retain the fragments in the event of a breakage. Option of triphosphor tubes with internal reflectors, which reduce waste light and increase light output by up to 75%. 16mm (T5) tubes provide a compact alternative to T8 tubes, offering peak performance at +35 °C and typically provide 5% more efficiency in most ceiling applications when compared to equivalent T8 tubes. Note Nominal tube diameter - T5=16mm, T8=26mm, T9=29mm, T12=38mm

Product Detail

New items

2776, Sylvania

Triphosphor T5 - Sylvania Luxline® Plus FHO (Fluorescent High Output) A new generation of triphosphor High Output slim linear fluorescent tubes. The T5 Luxline Plus triphosphor lamp is the ideal solution for indirect and direct industrial lighting systems with high ceilings. They offer good colorimetric, photometric and lumen maintenance. Particularly suitable for use in the new low profile recessed and suspended luminaires and modular systems. Almost constant lumen maintenance throughout the entire life of the lamp due to Luxline Plus triphosphor technology High colour rendering (Ra85/Class1B) For applications where a hugh luminous flux is required (upto 7000 lm per lamp) For electronic ballast operation only Optimised ambient operating temperature at 35° C (max. lumen output) allows compact luminaire designs Average rated life: up to 24000 hours Fluorescent Triphosphor Triphosphor tubes have longer life, a lower mercury content, better colour rendering and higher lumen maintenance than their Halophosphate counterparts. The tubes are available in a variety of colour temperatures from 3000K (warm white) to 6000K (daylight). Extended life expectancy which can be increased by upto 20,000 hours with the use of high frequency luminaires. Shatter resistant versions available which retain the fragments in the event of a breakage. Option of triphosphor tubes with internal reflectors, which reduce waste light and increase light output by up to 75%. 16mm (T5) tubes provide a compact alternative to T8 tubes, offering peak performance at +35 °C and typically provide 5% more efficiency in most ceiling applications when compared to equivalent T8 tubes. Note Nominal tube diameter - T5=16mm, T8=26mm, T9=29mm, T12=38mm

Product Detail

New items

1531, Sylvania

Triphosphor T8 - Sylvania Luxline® Plus A new generation of triphosphor coated fluorescent tubes. Using T8 triphosphor tubes in place of T12 and T8 halophosphor tubes increases light levels and lamp life by up to 20000 hours, when used with electronic control gear. In addition, these T8 tubes provide improved colour rendering performance, reduced maintenance and energy costs. These lights start instantly with brighter lighting compared to standard fluorescent tubes. Features & Benefits High light output and almost constant lumen maintenance throughout life High colour rendering (Ra85/Class 1B) Consumes 10% less energy than comparable 38 mm fluorescent tubes Operates on conventional and electronic ballasts Product Application Information Cost effective and reliable. Easy to install and give instant light without compromise on luminosity. Well suited for garages, workshops and businesses. 0001531 Fluorescent Tube 0001531 is a 58 watt T8 fluorescent tube with a G13 cap. It is a warm white colour with a colour temperature rating of 3000 K. This fluorescent lamp creates luminous flux of 5200 lumens (lm) and has a colour rendering index rating (Ra) of 85. This fluorescent tube meets EU energy efficiency class A requirements and has energy consumption of 68 kWh/1000h. Fluorescent Triphosphor Triphosphor tubes have longer life, a lower mercury content, better colour rendering and higher lumen maintenance than their Halophosphate counterparts. The tubes are available in a variety of colour temperatures from 3000K (warm white) to 6000K (daylight). Extended life expectancy which can be increased by upto 20,000 hours with the use of high frequency luminaires. Shatter resistant versions available which retain the fragments in the event of a breakage. Option of triphosphor tubes with i...

Product Detail

New Items

1532, Sylvania

581, Sylvania

1394, Sylvania

580, Sylvania

1530, Sylvania

1512, Sylvania

2782, Sylvania

2764, Sylvania

2761, Sylvania

2767, Sylvania

2776, Sylvania

1531, Sylvania

FAQs