Through Hole Fixed Resistors

New items

RCC025 5K6 J, Arcol

RCC Series 0.25W Improved impulse endurance properties with respect to carbon film circuits Wide resistance range available: 2,2 Ω - 4,7 MΩ Stability class: 10% Axial - 0.25W/0.5W

Product Detail

New items

RCC050 3R9 J, Arcol

RCC Series 0.5W Improved pulse endurance characteristics compared to carbon-film devices Wide resistance range is available, 2.2Ω - 4.7MΩ Stability Class : 10% Axial - 0.25W/0.5W

Product Detail

New items

RCC050 39K J, Arcol

RCC Series 0.5W Improved pulse endurance characteristics compared to carbon-film devices Wide resistance range is available, 2.2Ω - 4.7MΩ Stability Class : 10% Axial - 0.25W/0.5W

Product Detail

New items

RCC025 1K2 J, Arcol

RCC Series 0.25W Improved impulse endurance properties with respect to carbon film circuits Wide resistance range available: 2,2 Ω - 4,7 MΩ Stability class: 10% Axial - 0.25W/0.5W

Product Detail

New items

RGP0207CHJ470M, TE Connectivity

RGP0207CH Series, Axial Metal glazed thick film

Product Detail

New items

Carbon Film Resistors 0.5W - Full Bandolier (1KΩ to 9M1Ω) The RS series of carbon film axial leaded resistors offer excellent long term stability and feature standard solder-plated copper leads. Applications include automotive, telecommunication and medical equipment. A comprehensive range of high stability carbon film resistors qualified and tested to the requirements of IEC 115 and IEC 115-2. The ruggedised welded cap and lead method of manufacture provides a considerable strength and resistance to damage. The coating materials and the colour bands are epoxy resin and are highly resistant to solvents, abrasion and chipping. Improvements in materials and processing have allowed the rated power to be improved. Excellent stability against changes in load conditions or moisture levels, with a low noise level and high reliability make these carbon film resistors suitable for a wide range of applications. Rated at 70°C in free air mounted horizontally. Climatic category 55/155/56.

Product Detail

New items

707-8252, RS PRO

Carbon Film Resistors 0.5W - Full Bandolier (1KΩ to 9M1Ω) The RS series of carbon film axial leaded resistors offer excellent long term stability and feature standard solder-plated copper leads. Applications include automotive, telecommunication and medical equipment. A comprehensive range of high stability carbon film resistors qualified and tested to the requirements of IEC 115 and IEC 115-2. The ruggedised welded cap and lead method of manufacture provides a considerable strength and resistance to damage. The coating materials and the colour bands are epoxy resin and are highly resistant to solvents, abrasion and chipping. Improvements in materials and processing have allowed the rated power to be improved. Excellent stability against changes in load conditions or moisture levels, with a low noise level and high reliability make these carbon film resistors suitable for a wide range of applications. Rated at 70°C in free air mounted horizontally. Climatic category 55/155/56.

Product Detail

New items

707-8265, RS PRO

Carbon Film Resistors 0.5W The RS series of carbon film axial leaded resistors offer excellent long term stability and feature standard solder-plated copper leads. Applications include automotive, telecommunication and medical equipment. A comprehensive range of high stability carbon film resistors qualified and tested to the requirements of IEC 115 and IEC 115-2. The ruggedised welded cap and lead method of manufacture provides a considerable strength and resistance to damage. The coating materials and the colour bands are epoxy resin and are highly resistant to solvents, abrasion and chipping. Improvements in materials and processing have allowed the rated power to be improved. Excellent stability against changes in load conditions or moisture levels, with a low noise level and high reliability make these carbon film resistors suitable for a wide range of applications. Rated at 70°C in free air mounted horizontally. Climatic category 55/155/56.

Product Detail

New items

707-8280, RS PRO

Carbon Film Resistors 0.5W The RS series of carbon film axial leaded resistors offer excellent long term stability and feature standard solder-plated copper leads. Applications include automotive, telecommunication and medical equipment. A comprehensive range of high stability carbon film resistors qualified and tested to the requirements of IEC 115 and IEC 115-2. The ruggedised welded cap and lead method of manufacture provides a considerable strength and resistance to damage. The coating materials and the colour bands are epoxy resin and are highly resistant to solvents, abrasion and chipping. Improvements in materials and processing have allowed the rated power to be improved. Excellent stability against changes in load conditions or moisture levels, with a low noise level and high reliability make these carbon film resistors suitable for a wide range of applications. Rated at 70°C in free air mounted horizontally. Climatic category 55/155/56.

Product Detail

New items

707-7647, RS PRO

Carbon Film Resistors 0.25W The RS PRO series of carbon film axial leaded resistors offer excellent long term stability and feature standard solder-plated copper leads. The carbon film is the most common axial leaded resistor which is used for applications where a very good tolerance and temperature coefficient are not necessary. Features Available in resistances from 1 Ohm to 9.1 mOhm 0.25W power rating 5% tolerance Resistor body 2.3 mm in diameter, 6.3 mm in length Carbon film construction Long-term stability Solder plated copper leads Benefits of Carbon Composition Carbon composition resistors are made from a moulded carbon powder that has been mixed with a phenolic resin to bind and create a uniform resistive body. It is then surrounded in an insulating case after attaching end leads. Carbon composition resistors are used in applications in which the initial tolerance does not need to be any closer than +/- 5% of the value. What does the power rating mean? The power rating of a resistor describes the amount of power that the resistor can dissipate safely. What do the colours mean? Each of the colour bands has a specific meaning. The first two colours give the base value of the resistor, the next gives the multiplier and the final band the tolerance. If a resistor has five bands, it is a more precise resistor, in which the first three bands represent the base values, and the fourth and fifth represent the multiplier and tolerance respectively. RS PRO RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of...

Product Detail

New items

707-7599, RS PRO

Carbon Film Resistors 0.25W The RS PRO series of carbon film axial leaded resistors offer excellent long term stability and feature standard solder-plated copper leads. The carbon film is the most common axial leaded resistor which is used for applications where a very good tolerance and temperature coefficient are not necessary. Features Available in resistances from 1 Ohm to 9.1 mOhm 0.25W power rating 5% tolerance Resistor body 2.3 mm in diameter, 6.3 mm in length Carbon film construction Long-term stability Solder plated copper leads Benefits of Carbon Composition Carbon composition resistors are made from a moulded carbon powder that has been mixed with a phenolic resin to bind and create a uniform resistive body. It is then surrounded in an insulating case after attaching end leads. Carbon composition resistors are used in applications in which the initial tolerance does not need to be any closer than +/- 5% of the value. What does the power rating mean? The power rating of a resistor describes the amount of power that the resistor can dissipate safely. What do the colours mean? Each of the colour bands has a specific meaning. The first two colours give the base value of the resistor, the next gives the multiplier and the final band the tolerance. If a resistor has five bands, it is a more precise resistor, in which the first three bands represent the base values, and the fourth and fifth represent the multiplier and tolerance respectively. RS PRO RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of...

Product Detail

New items

707-8176, RS PRO

Carbon Film Resistors 0.5W - Full Bandolier (1Ω to 910Ω) The RS series of carbon film axial leaded resistors offer excellent long term stability and feature standard solder-plated copper leads. Applications include automotive, telecommunication and medical equipment. A comprehensive range of high stability carbon film resistors qualified and tested to the requirements of IEC 115 and IEC 115-2. The ruggedised welded cap and lead method of manufacture provides a considerable strength and resistance to damage. The coating materials and the colour bands are epoxy resin and are highly resistant to solvents, abrasion and chipping. Improvements in materials and processing have allowed the rated power to be improved. Excellent stability against changes in load conditions or moisture levels, with a low noise level and high reliability make these carbon film resistors suitable for a wide range of applications. Rated at 70°C in free air mounted horizontally. Climatic category 55/155/56.

Product Detail

Through Hole Fixed Resistors

New Items

RCC025 5K6 J, Arcol

RCC050 3R9 J, Arcol

RCC050 39K J, Arcol

RCC025 1K2 J, Arcol

RGP0207CHJ470M, TE Connectivity

707-8300, RS PRO

707-8252, RS PRO

707-8265, RS PRO

707-8280, RS PRO

707-7647, RS PRO

707-7599, RS PRO

707-8176, RS PRO

FAQs