Pneumatic Elbow Fittings

New items

3199 08 10, Legris

Stud Elbow Adaptor - Male Thread A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture. 3109 fittings are for the connection of tubing at 90° with a male thread. They can be tightened using a flat spanner or an Allen key if the installation is short on space. Features and Benefits Full bore design Exceptionally low leak rate Available with BSPP and BSPT threads Suitable for Vacuum or pressure applications ISO 14743 compliant Date coded for traceability and reliability Automatically seals in both dynamic and static situations Note In the Thread Size column, R indicates taper thread and G indicates parallel thread. Threaded Tube Adaptors, Elbows and Tees 4 to 12mm compact fittings Suitable for 99% vacuum Push-in assembly: no tools required Disconnect by depressing release collet Plastic body Nitrile O-rings A range of pneumatic elbow and tee adaptors for converting push-in to threaded type connections. All types have a maximum operating pressure of 20 bar and an operating temperature range of -20 to +80°C.

Product Detail

New items

3109 08 10, Legris

Stud Elbow Adaptor - Male Thread A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture. 3109 fittings are for the connection of tubing at 90° with a male thread. They can be tightened using a flat spanner or an Allen key if the installation is short on space. Features and Benefits Full bore design Exceptionally low leak rate Available with BSPP and BSPT threads Suitable for Vacuum or pressure applications ISO 14743 compliant Date coded for traceability and reliability Automatically seals in both dynamic and static situations Note In the Thread Size column, R indicates taper thread and G indicates parallel thread. Threaded Tube Adaptors, Elbows and Tees 4 to 12mm compact fittings Suitable for 99% vacuum Push-in assembly: no tools required Disconnect by depressing release collet Plastic body Nitrile O-rings A range of pneumatic elbow and tee adaptors for converting push-in to threaded type connections. All types have a maximum operating pressure of 20 bar and an operating temperature range of -20 to +80°C.

Product Detail

New items

M-5HL-6, SMC

Hose Elbow Elbows for connecting another pipe fitting at an angle of 45° or 90°. Primary connection M5 Threaded Adaptors & Accessories M5 Nickel plated miniature fittings offering a compact and space saving design The tube has a large retaining force with hose nipples assuring easy removal Suitable for nylon, soft nylon and polyurethane tubing

Product Detail

New items

3109 04 13, Legris

Stud Elbow Adaptor - Male Thread A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture. 3109 fittings are for the connection of tubing at 90° with a male thread. They can be tightened using a flat spanner or an Allen key if the installation is short on space. Features and Benefits Full bore design Exceptionally low leak rate Available with BSPP and BSPT threads Suitable for Vacuum or pressure applications ISO 14743 compliant Date coded for traceability and reliability Automatically seals in both dynamic and static situations Note In the Thread Size column, R indicates taper thread and G indicates parallel thread. Threaded Tube Adaptors, Elbows and Tees 4 to 12mm compact fittings Suitable for 99% vacuum Push-in assembly: no tools required Disconnect by depressing release collet Plastic body Nitrile O-rings A range of pneumatic elbow and tee adaptors for converting push-in to threaded type connections. All types have a maximum operating pressure of 20 bar and an operating temperature range of -20 to +80°C.

Product Detail

New items

144-2617, RS PRO

RS Pro Metric One-Touch Fittings Features and Benefits One-Touch push to connect configuration allows for an instant tubing connection Useful for piping in confined space, due to its six-angle wrench processing inside Immediate strong engineering plastic (POM) sleeve disconnection by pressing the sleeve then simply removing tube from fitting Fittings are already equipped with Teflon treatment or O-Ring on the thread Nickel plated brass body ensures anti-contamination properties for an extended product life Applicable fluid type, air (no other type of gas or liquid) Working pressure range 0 to 150 psi Working temperature range 0 to 60 °C

Product Detail

New items

144-2611, RS PRO

RS Pro Metric One-Touch Fittings Features and Benefits One-Touch push to connect configuration allows for an instant tubing connection Useful for piping in confined space, due to its six-angle wrench processing inside Immediate strong engineering plastic (POM) sleeve disconnection by pressing the sleeve then simply removing tube from fitting Fittings are already equipped with Teflon treatment or O-Ring on the thread Nickel plated brass body ensures anti-contamination properties for an extended product life Applicable fluid type, air (no other type of gas or liquid) Working pressure range 0 to 150 psi Working temperature range 0 to 60 °C

Product Detail

New items

144-2608, RS PRO

RS Pro Metric One-Touch Fittings Features and Benefits One-Touch push to connect configuration allows for an instant tubing connection Useful for piping in confined space, due to its six-angle wrench processing inside Immediate strong engineering plastic (POM) sleeve disconnection by pressing the sleeve then simply removing tube from fitting Fittings are already equipped with Teflon treatment or O-Ring on the thread Nickel plated brass body ensures anti-contamination properties for an extended product life Applicable fluid type, air (no other type of gas or liquid) Working pressure range 0 to 150 psi Working temperature range 0 to 60 °C

Product Detail

New items

3199 08 17, Legris

Stud Elbow Adaptor - Male Thread A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture. 3109 fittings are for the connection of tubing at 90° with a male thread. They can be tightened using a flat spanner or an Allen key if the installation is short on space. Features and Benefits Full bore design Exceptionally low leak rate Available with BSPP and BSPT threads Suitable for Vacuum or pressure applications ISO 14743 compliant Date coded for traceability and reliability Automatically seals in both dynamic and static situations Note In the Thread Size column, R indicates taper thread and G indicates parallel thread. Threaded Tube Adaptors, Elbows and Tees 4 to 12mm compact fittings Suitable for 99% vacuum Push-in assembly: no tools required Disconnect by depressing release collet Plastic body Nitrile O-rings A range of pneumatic elbow and tee adaptors for converting push-in to threaded type connections. All types have a maximum operating pressure of 20 bar and an operating temperature range of -20 to +80°C.

Product Detail

New items

3199 06 19, Legris

Stud Elbow Adaptor - Male Thread A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture. 3109 fittings are for the connection of tubing at 90° with a male thread. They can be tightened using a flat spanner or an Allen key if the installation is short on space. Features and Benefits Full bore design Exceptionally low leak rate Available with BSPP and BSPT threads Suitable for Vacuum or pressure applications ISO 14743 compliant Date coded for traceability and reliability Automatically seals in both dynamic and static situations Note In the Thread Size column, R indicates taper thread and G indicates parallel thread. Threaded Tube Adaptors, Elbows and Tees 4 to 12mm compact fittings Suitable for 99% vacuum Push-in assembly: no tools required Disconnect by depressing release collet Plastic body Nitrile O-rings A range of pneumatic elbow and tee adaptors for converting push-in to threaded type connections. All types have a maximum operating pressure of 20 bar and an operating temperature range of -20 to +80°C.

Product Detail

New items

3199 04 13, Legris

Stud Elbow Adaptor - Male Thread A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture. 3109 fittings are for the connection of tubing at 90° with a male thread. They can be tightened using a flat spanner or an Allen key if the installation is short on space. Features and Benefits Full bore design Exceptionally low leak rate Available with BSPP and BSPT threads Suitable for Vacuum or pressure applications ISO 14743 compliant Date coded for traceability and reliability Automatically seals in both dynamic and static situations Note In the Thread Size column, R indicates taper thread and G indicates parallel thread. Threaded Tube Adaptors, Elbows and Tees 4 to 12mm compact fittings Suitable for 99% vacuum Push-in assembly: no tools required Disconnect by depressing release collet Plastic body Nitrile O-rings A range of pneumatic elbow and tee adaptors for converting push-in to threaded type connections. All types have a maximum operating pressure of 20 bar and an operating temperature range of -20 to +80°C.

Product Detail

New items

3199 14 21, Legris

Stud Elbow Adaptor - Male Thread A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture. 3109 fittings are for the connection of tubing at 90° with a male thread. They can be tightened using a flat spanner or an Allen key if the installation is short on space. Features and Benefits Full bore design Exceptionally low leak rate Available with BSPP and BSPT threads Suitable for Vacuum or pressure applications ISO 14743 compliant Date coded for traceability and reliability Automatically seals in both dynamic and static situations Note In the Thread Size column, R indicates taper thread and G indicates parallel thread. Threaded Tube Adaptors, Elbows and Tees 4 to 12mm compact fittings Suitable for 99% vacuum Push-in assembly: no tools required Disconnect by depressing release collet Plastic body Nitrile O-rings A range of pneumatic elbow and tee adaptors for converting push-in to threaded type connections. All types have a maximum operating pressure of 20 bar and an operating temperature range of -20 to +80°C.

Product Detail

New items

144-2618, RS PRO

RS Pro Metric One-Touch Fittings Features and Benefits One-Touch push to connect configuration allows for an instant tubing connection Useful for piping in confined space, due to its six-angle wrench processing inside Immediate strong engineering plastic (POM) sleeve disconnection by pressing the sleeve then simply removing tube from fitting Fittings are already equipped with Teflon treatment or O-Ring on the thread Nickel plated brass body ensures anti-contamination properties for an extended product life Applicable fluid type, air (no other type of gas or liquid) Working pressure range 0 to 150 psi Working temperature range 0 to 60 °C

Product Detail

Pneumatic Elbow Fittings

New Items

3199 08 10, Legris

3109 08 10, Legris

M-5HL-6, SMC

3109 04 13, Legris

144-2617, RS PRO

144-2611, RS PRO

144-2608, RS PRO

3199 08 17, Legris

3199 06 19, Legris

3199 04 13, Legris

3199 14 21, Legris

144-2618, RS PRO

FAQs