Pressure & Vacuum Switches

New items

ZSE30AF-C4H-N-LB, SMC

ISE/ZSE30 Pressure/Vacuum Switch Vacuum and positive pressure models available, with PNP, Analogue voltage or Analogue current outputs Two colour digital display for fast "abnormal condition" identification High precision resolution, typically 1/1000 User selectable pressure unit display CE marked in accordance with relevant European Directives Display calibration capability allowing uniformity of display User-friendly, raised rubber button control Plug connection for a 2 metre flying lead provides fast installation Port Connections R 1/8; M5 Protection Rating IP40 Note Part Number ZS-27-A is a 3 core cable assembly and suits all now obsolete ZSE/ISE30-#-#-# and when supplied with the unit has the suffix code letter -L Part Number ZS-38-3L is a 3 core cable assembly and suits new ZSE30A/ZSE30F/ISE30A-#-N or P and is shown when supplied with the item as an additional suffix -L after the N or P

Product Detail

New items

ZSE40A-01-R, SMC

ISE/ZSE40 Pressure/ Vacuum Switch Multiple output capability - 2 PNP + 1 analogue output or 2 NPN + 1 analogue output User selectable pressure unit display High speed response with anti-chatter function Vacuum and positive pressure models Complete self diagnosis with error indication Peak or minimum pressure display during normal operation IP65 protection rating 3 metre flying lead Note In applications where the switch is exposed to water, oil, dust etc. insert a 2.5mm I.D., tube into the atmospheric release port and pipe to a clean area.

Product Detail

New items

ZSE2-T1-15C, SMC

ZSE2 Series Pressure/Vacuum Switch The professional ZSE2 series is a compact pressure switch and can be integrated with ZX or ZR vacuum systems. The pressure switch has a plug connector portion to make wiring easy and simple. The ZSE2 series has a quick response time of 10mS. Operating pressure range -101 -0kPa Port connections R1/8 Protection rating IP40

Product Detail

New items

440H-P03035, Allen Bradley Guardmaster

Rotacam Pneumatic Safety Switch Hinge-operated safety switch designed for interlocking hinged guard doors and access flaps May be mounted in any direction in any position. The bored stainless steel operating shaft is mounted in a sealed bearing which is sufficiently robust to enable switch itself to be used as the hinge if necessary For use on pneumatic machinery - unit gives positive acting isolation of a machines compressed air supply Incorporates push-in fittings for direct connection to 4mm Ø nylon tube (internal diameter 2.5mm) Maximum pressure 8 bar Temperature range -10°C to + 60°C Rotacam Pneumatic Safety Switch

Product Detail

New items

ZSE30A-C4L-C-MGA1, SMC

ISE/ZSE30 Pressure/Vacuum Switch Vacuum and positive pressure models available, with PNP, Analogue voltage or Analogue current outputs Two colour digital display for fast "abnormal condition" identification High precision resolution, typically 1/1000 User selectable pressure unit display CE marked in accordance with relevant European Directives Display calibration capability allowing uniformity of display User-friendly, raised rubber button control Plug connection for a 2 metre flying lead provides fast installation Port Connections R 1/8; M5 Protection Rating IP40 Note Part Number ZS-27-A is a 3 core cable assembly and suits all now obsolete ZSE/ISE30-#-#-# and when supplied with the unit has the suffix code letter -L Part Number ZS-38-3L is a 3 core cable assembly and suits new ZSE30A/ZSE30F/ISE30A-#-N or P and is shown when supplied with the item as an additional suffix -L after the N or P

Product Detail

New items

ZSE30A-N7H-E, SMC

ISE/ZSE30 Pressure/Vacuum Switch Vacuum and positive pressure models available, with PNP, Analogue voltage or Analogue current outputs Two colour digital display for fast "abnormal condition" identification High precision resolution, typically 1/1000 User selectable pressure unit display CE marked in accordance with relevant European Directives Display calibration capability allowing uniformity of display User-friendly, raised rubber button control Plug connection for a 2 metre flying lead provides fast installation Port Connections R 1/8; M5 Protection Rating IP40 Note Part Number ZS-27-A is a 3 core cable assembly and suits all now obsolete ZSE/ISE30-#-#-# and when supplied with the unit has the suffix code letter -L Part Number ZS-38-3L is a 3 core cable assembly and suits new ZSE30A/ZSE30F/ISE30A-#-N or P and is shown when supplied with the item as an additional suffix -L after the N or P

Product Detail

New items

ZSE30A-N01-P-L, SMC

ZSE30A Vacuum Switch Digital pressure switch range from SMC for monitoring vacuum pressure from -101 to 0 KPa with 2 switching outputs. These vacuum pressure switches are simple to set up in just 3 steps and allow settings to be copied from a master unit to up to 10 slave switches. PNP, Analogue voltage or Analogue current outputs Two colour digital display High precision resolution, typically 1/1000 User selectable pressure unit display CE marked in accordance with relevant European Directives Display calibration capability allowing uniformity of display User-friendly, raised rubber button control Plug connection with 2 metre flying lead provides fast installation Port Connections R 1/8; M5 Protection Rating IP40

Product Detail

New items

ZSE2-01-55L, SMC

ZSE2 Series Pressure/Vacuum Switch The professional ZSE2 series is a compact pressure switch and can be integrated with ZX or ZR vacuum systems. The pressure switch has a plug connector portion to make wiring easy and simple. The ZSE2 series has a quick response time of 10mS. Operating pressure range -101 -0kPa Port connections R1/8 Protection rating IP40

Product Detail

New items

ZSE40AF-01-T-X501, SMC

ISE/ZSE40 Pressure/ Vacuum Switch Multiple output capability - 2 PNP + 1 analogue output or 2 NPN + 1 analogue output User selectable pressure unit display High speed response with anti-chatter function Vacuum and positive pressure models Complete self diagnosis with error indication Peak or minimum pressure display during normal operation IP65 protection rating 3 metre flying lead Note In applications where the switch is exposed to water, oil, dust etc. insert a 2.5mm I.D., tube into the atmospheric release port and pipe to a clean area.

Product Detail

New items

ZSE30A-N01-C-G, SMC

ZSE30A Vacuum Switch Digital pressure switch range from SMC for monitoring vacuum pressure from -101 to 0 KPa with 2 switching outputs. These vacuum pressure switches are simple to set up in just 3 steps and allow settings to be copied from a master unit to up to 10 slave switches. PNP, Analogue voltage or Analogue current outputs Two colour digital display High precision resolution, typically 1/1000 User selectable pressure unit display CE marked in accordance with relevant European Directives Display calibration capability allowing uniformity of display User-friendly, raised rubber button control Plug connection with 2 metre flying lead provides fast installation Port Connections R 1/8; M5 Protection Rating IP40

Product Detail

New items

ZSE2-T1-15, SMC

ZSE2 Series Pressure/Vacuum Switch The professional ZSE2 series is a compact pressure switch and can be integrated with ZX or ZR vacuum systems. The pressure switch has a plug connector portion to make wiring easy and simple. The ZSE2 series has a quick response time of 10mS. Operating pressure range -101 -0kPa Port connections R1/8 Protection rating IP40

Product Detail

Pressure & Vacuum Switches

New Items

ZSE30AF-C4H-N-LB, SMC

ZSE40A-01-R, SMC

ZSE2-T1-15C, SMC

440H-P03035, Allen Bradley Guardmaster

ZSE30A-C4L-C-MGA1, SMC

ZSE30A-N7H-E, SMC

ZSE30A-N01-P-L, SMC

ZSE2-01-55L, SMC

ZSE40AF-01-T-X501, SMC

ZSE30A-N01-C-G, SMC

ZSE2-T1-15, SMC

FAQs