Power Conditioners

New items

92605100, Sollatek

Combined Over/Under Voltage Plus Transients Protection Hivoltguard protects all electronic equipment against over voltage, surges, and spikes. Fridgeguard protects against low voltage conditions which are specifically harmful to all motors, pumps, and compressors in fridges and freezers. Automatically disconnects when mains "BAD" Automatically reconnects again when "GOOD" Fast response to fluctuations (10ns) Full status indication from LED array Reset when mains OK for a pre-set period of 1 minute for Hivoltguard, 3 minutes for Fridgeguard Dimensions (L x W x D) 135 x 60 x 55mm Transient Voltage Suppressors (Mains, Domestic) Voltage surges, often referred to as spikes or transient overvoltages are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. For protecting mains power systems, categories A, B and C (mains) devices are used. All mains style products in this section are location category B and exceed the requirements of location category A making them suitable for use in both locations.

Product Detail

New items

92642102, Sollatek

Trailing Multiway Socket with Spike & Surge Protection Multiway adaptor with cable and maching plug Suitable for protection of all electronic equipment Internal surge and spike protection L-N, L-E and N-E Transient Voltage Suppressors (Modules,Industrial) Voltage surges, often referred to as spikes or transient overvoltages are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning activity and can reach up to 6000V, with current surges of up to 3000A. The maximum size of the voltage and current surges depends on the location within the buildings wiring system. BS6651:1999 Annex C which was replaced in August 2008 by BS EN 62305-4:2006 is complemented by BS EN 61643-11/12 and covers location categories and provides guidance on protection of electronic equipment. For mains power systems, Types I, II and III are used. Surge protection devices not designed to fit into these categories may only provide limited protection and the equipment they protect may suffer damage.

Product Detail

New items

98204010, Sollatek

Microprocessor Controlled Voltage Stabilisers - SVS Range From Sollatek, the Voltright SVS range of voltage stabilisers protects electrical equipment by monitoring the mains voltage and stabilising any rises or drops, ensuring a constant voltage and suppressing any surges or spikes. The SVS series accommodates voltage fluctuations across a very wide range, and maintains an output voltage that is accurate to within fine tolerances. The Voltright voltage stabiliser have microprocessor controlled operation resulting in extremely fast reaction times. Suitable for all electronic and electrical devices, Sollatek voltage stabilisers are particularly useful in applications such as medical refrigeration and air conditioning. Features and Benefits: All-electronic construction with no moving parts Easy to install and has a small foot print Input Range: 230Vac -29% → +23% Output Accuracy: Input = 171 → 275V, Output = 230Vac ± 6%, Input = 164 → 171V, Output = 230Vac ± 10%, Input = 274 → 285V, Output = 230Vac ± 10% Correction Speed: 750Volts / Second Response Within 15 Millisecond Wave form distortion: None Electronic switching Frequency: 45-75Hz Input connection: UK13 = BS1363 3 Pin (Flat Blade) Plug, Euro = Schuko Plug , TC = Screw terminals Output connection: UK13 = BS1363 3 Pin (Flat Blade) Socket, Euro = Schuko Socket, TC = Screw terminals Standards EN 50022 - 81- 82, EN 61000-4-2 to 4-6 & 4 -11 Standards EN 50022 - 81- 82, EN 61000-4-2 to 4-6 & 4 -11

Product Detail

New items

93000200, Sollatek

Distribution Panel Spike & Surge Device Mains spike/surge protection devices that are ideal for protecting all sensitive electronic equipment. Features and Benefits: Protection from voltage transients that can occur between phases (L-N, L-E, N-E) Designed to be installed close to the incoming electrical supply panel Wired in parallel with the supply The unit should be connected via HRC fuses or a circuit breaker to protect the connecting cable Two-led status indicator indicate level of protection available Transient Voltage Suppressors (Modules,Industrial) Voltage surges, often referred to as spikes or transient overvoltages are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning activity and can reach up to 6000V, with current surges of up to 3000A. The maximum size of the voltage and current surges depends on the location within the buildings wiring system. BS6651:1999 Annex C which was replaced in August 2008 by BS EN 62305-4:2006 is complemented by BS EN 61643-11/12 and covers location categories and provides guidance on protection of electronic equipment. For mains power systems, Types I, II and III are used. Surge protection devices not designed to fit into these categories may only provide limited protection and the equipment they protect may suffer damage.

Product Detail

New items

98202010, Sollatek

Microprocessor Controlled Voltage Stabilisers - SVS Range From Sollatek, the Voltright SVS range of voltage stabilisers protects electrical equipment by monitoring the mains voltage and stabilising any rises or drops, ensuring a constant voltage and suppressing any surges or spikes. The SVS series accommodates voltage fluctuations across a very wide range, and maintains an output voltage that is accurate to within fine tolerances. The Voltright voltage stabiliser have microprocessor controlled operation resulting in extremely fast reaction times. Suitable for all electronic and electrical devices, Sollatek voltage stabilisers are particularly useful in applications such as medical refrigeration and air conditioning. Features and Benefits: All-electronic construction with no moving parts Easy to install and has a small foot print Input Range: 230Vac -29% → +23% Output Accuracy: Input = 171 → 275V, Output = 230Vac ± 6%, Input = 164 → 171V, Output = 230Vac ± 10%, Input = 274 → 285V, Output = 230Vac ± 10% Correction Speed: 750Volts / Second Response Within 15 Millisecond Wave form distortion: None Electronic switching Frequency: 45-75Hz Input connection: UK13 = BS1363 3 Pin (Flat Blade) Plug, Euro = Schuko Plug , TC = Screw terminals Output connection: UK13 = BS1363 3 Pin (Flat Blade) Socket, Euro = Schuko Socket, TC = Screw terminals Standards EN 50022 - 81- 82, EN 61000-4-2 to 4-6 & 4 -11 Standards EN 50022 - 81- 82, EN 61000-4-2 to 4-6 & 4 -11

Product Detail

New items

98212010, Sollatek

Microprocessor Controlled Voltage Stabilisers - SVS Range From Sollatek, the Voltright SVS range of voltage stabilisers protects electrical equipment by monitoring the mains voltage and stabilising any rises or drops, ensuring a constant voltage and suppressing any surges or spikes. The SVS series accommodates voltage fluctuations across a very wide range, and maintains an output voltage that is accurate to within fine tolerances. The Voltright voltage stabiliser have microprocessor controlled operation resulting in extremely fast reaction times. Suitable for all electronic and electrical devices, Sollatek voltage stabilisers are particularly useful in applications such as medical refrigeration and air conditioning. Features and Benefits: All-electronic construction with no moving parts Easy to install and has a small foot print Input Range: 230Vac -29% → +23% Output Accuracy: Input = 171 → 275V, Output = 230Vac ± 6%, Input = 164 → 171V, Output = 230Vac ± 10%, Input = 274 → 285V, Output = 230Vac ± 10% Correction Speed: 750Volts / Second Response Within 15 Millisecond Wave form distortion: None Electronic switching Frequency: 45-75Hz Input connection: UK13 = BS1363 3 Pin (Flat Blade) Plug, Euro = Schuko Plug , TC = Screw terminals Output connection: UK13 = BS1363 3 Pin (Flat Blade) Socket, Euro = Schuko Socket, TC = Screw terminals Standards EN 50022 - 81- 82, EN 61000-4-2 to 4-6 & 4 -11 Standards EN 50022 - 81- 82, EN 61000-4-2 to 4-6 & 4 -11

Product Detail

New items

92622020, Sollatek

Voltshield A/C Guard Microprocessor Voltage Switcher, Air conditioning and Commercial Fridges Sollatek Voltshield AC Guards have been developed for use with office and home Air Conditioning equipment (including split units) and commercial and industrial refrigeration equipment. Voltshield AC Guards protect Air Conditioning and refrigeration units from low voltage brownouts, power fluctuations, power back surges, surges and spikes. When a problem occurs, the AC Guard instantly switches off the Air Conditioning unit and once the mains supply has stabilised, it reconnects. These voltage switchers automatically provide complete protection when wired between your appliance and the mains. Voltshield AC guards can cater for voltage fluctuations across a large range, and the output voltage is accurate to within fine tolerances. All electronic construction with no moving parts Single phase Overload and short circuit protection is provided by the circuit breaker Direct wiring adds extra security Overload protection 4 min intelligent start-up delay before power reconnection protects against back surges, prevents frequent start stops and avoids unnecessary down time 16A, 20A and 25A options are available in this range Standards BS EN60730

Product Detail

New items

98208222, Sollatek

Microprocessor Controlled Voltage Stabilisers - SVS Range From Sollatek, the Voltright SVS range of voltage stabilisers protects electrical equipment by monitoring the mains voltage and stabilising any rises or drops, ensuring a constant voltage and suppressing any surges or spikes. The SVS series accommodates voltage fluctuations across a very wide range, and maintains an output voltage that is accurate to within fine tolerances. The Voltright voltage stabiliser have microprocessor controlled operation resulting in extremely fast reaction times. Suitable for all electronic and electrical devices, Sollatek voltage stabilisers are particularly useful in applications such as medical refrigeration and air conditioning. Features and Benefits: All-electronic construction with no moving parts Easy to install and has a small foot print Input Range: 230Vac -29% → +23% Output Accuracy: Input = 171 → 275V, Output = 230Vac ± 6%, Input = 164 → 171V, Output = 230Vac ± 10%, Input = 274 → 285V, Output = 230Vac ± 10% Correction Speed: 750Volts / Second Response Within 15 Millisecond Wave form distortion: None Electronic switching Frequency: 45-75Hz Input connection: UK13 = BS1363 3 Pin (Flat Blade) Plug, Euro = Schuko Plug , TC = Screw terminals Output connection: UK13 = BS1363 3 Pin (Flat Blade) Socket, Euro = Schuko Socket, TC = Screw terminals Standards EN 50022 - 81- 82, EN 61000-4-2 to 4-6 & 4 -11 Standards EN 50022 - 81- 82, EN 61000-4-2 to 4-6 & 4 -11

Product Detail

New items

92615100, Sollatek

Combined Over/Under Voltage Plus Transients Protection Hivoltguard protects all electronic equipment against over voltage, surges, and spikes. Fridgeguard protects against low voltage conditions which are specifically harmful to all motors, pumps, and compressors in fridges and freezers. Automatically disconnects when mains "BAD" Automatically reconnects again when "GOOD" Fast response to fluctuations (10ns) Full status indication from LED array Reset when mains OK for a pre-set period of 1 minute for Hivoltguard, 3 minutes for Fridgeguard Dimensions (L x W x D) 135 x 60 x 55mm Transient Voltage Suppressors (Mains, Domestic) Voltage surges, often referred to as spikes or transient overvoltages are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. For protecting mains power systems, categories A, B and C (mains) devices are used. All mains style products in this section are location category B and exceed the requirements of location category A making them suitable for use in both locations.

Product Detail

New items

98216222, Sollatek

Microprocessor Controlled Voltage Stabilisers - SVS Range From Sollatek, the Voltright SVS range of voltage stabilisers protects electrical equipment by monitoring the mains voltage and stabilising any rises or drops, ensuring a constant voltage and suppressing any surges or spikes. The SVS series accommodates voltage fluctuations across a very wide range, and maintains an output voltage that is accurate to within fine tolerances. The Voltright voltage stabiliser have microprocessor controlled operation resulting in extremely fast reaction times. Suitable for all electronic and electrical devices, Sollatek voltage stabilisers are particularly useful in applications such as medical refrigeration and air conditioning. Features and Benefits: All-electronic construction with no moving parts Easy to install and has a small foot print Input Range: 230Vac -29% → +23% Output Accuracy: Input = 171 → 275V, Output = 230Vac ± 6%, Input = 164 → 171V, Output = 230Vac ± 10%, Input = 274 → 285V, Output = 230Vac ± 10% Correction Speed: 750Volts / Second Response Within 15 Millisecond Wave form distortion: None Electronic switching Frequency: 45-75Hz Input connection: UK13 = BS1363 3 Pin (Flat Blade) Plug, Euro = Schuko Plug , TC = Screw terminals Output connection: UK13 = BS1363 3 Pin (Flat Blade) Socket, Euro = Schuko Socket, TC = Screw terminals Standards EN 50022 - 81- 82, EN 61000-4-2 to 4-6 & 4 -11 Standards EN 50022 - 81- 82, EN 61000-4-2 to 4-6 & 4 -11

Product Detail

New Items

92605100, Sollatek

92642102, Sollatek

98204010, Sollatek

93000200, Sollatek

98202010, Sollatek

98212010, Sollatek

92622020, Sollatek

98208222, Sollatek

92615100, Sollatek

98216222, Sollatek

FAQs