Products Found: 12
Showing Results For: Motor Control Development Kits
Motor Control Development Kits
FILTERS
Filters
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
Microchip
MA330045, Microchip
3 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 18.32
ON Semiconductor
LV8907UWGEVK, ON Semiconductor
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 266.21
ON Semiconductor
LV8729VGEVB, ON Semiconductor
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 33.52
ON Semiconductor
LV8731VGEVB, ON Semiconductor
5 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 28.22
XinaBox
OC06, XinaBox
156 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 27.90
2 +
£ 27.13
5 +
£ 26.04
ON Semiconductor
LV8727GEVB, ON Semiconductor
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 48.53
ON Semiconductor
LV8829LFQAGEVK, ON Semiconductor
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 101.31
ON Semiconductor
LB11696VGEVB, ON Semiconductor
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 44.37
XinaBox
OC05, XinaBox
173 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 24.41
2 +
£ 23.73
5 +
£ 22.79
ON Semiconductor
LV8760TGEVB, ON Semiconductor
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 33.15
5 +
£ 32.32
ON Semiconductor
NCV7707GEVB, ON Semiconductor
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 52.67
Microchip
ADM00600, Microchip
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 96.71
Showing
1 -
New Items
New items
MA330045, Microchip
The dsPIC33CH512MP508 Motor Control PIM (MA330045) is designed to demonstrate the capabilities of the dsPIC33CH512MP508 device. The devices from the dsPIC33CH512MP508 family are dual core DSCs. The dsPIC33CH512MP508 has two Digital Signal Controller (DSC) cores, namely Master Core and Slave Core, that can run independently at different device frequencies.
This Motor Control PIM is designed to take advantage of the high-resolution PWM (with fine edge placement) peripheral in the Slave core of the device. The PWM, along with other peripherals such as the ADC, enable motor control applications. The PIM can be used to demonstrate and develop motor control applications by inserting it in the 100-pin PIM interface header provided on the compatible motor control development boards
dsPICDEM MCHV-2 Development Board DM330023-2
dsPICDEM MCLV-2 Development Board DM330021-2
DsPICDEM MCHV-3 Development Board DM330023-3
Low-Voltage Motor Control Development Bundle DV330100
New items
LV8907UWGEVK, ON Semiconductor
The LV8907UWGEVK Evaluation Kit v1.0 is designed to provide an easy and quick development platform for three phase sensor-less BLDC motor control applications using the LV8907UW. The LV8907UW is a stand-alone solution that does not need a microcontroller for operation. An Atmel microcontroller is included in the kit to communicate via USB with the PC based graphical user interface (GUI) and support some peripheral functions such as current and voltage measurement, and external temperature monitoring for easier system development. For quick-start and basic The kit consists of 1. LV8907UW Evaluation Board (EVB) 2. USB cable Type A to mini B. 3. Graphical User Interface.
Motor operation: 7V to 20V (40V transient).
Max current: 30A.
Maximum continuous power: 400W.
New items
LV8729VGEVB, ON Semiconductor
The LV8729V is a PWM current-controlled micro step bipolar stepping motor driver. This driver can do eight ways of micro step resolution of 1/128 step from Full step, and can drive simply by the CLK input.
Single-channel PWM current control stepping motor driver
BiCDMOS process IC
Full, Half, Quarter, 1/8, 1/16, 1/32, 1/64, 1/128 step are selectable
Advance the excitation step with the only step signal input
Available forward reverse control
Over current protection circuit
Thermal shutdown circuit
Input pull down resistance
With reset pin and enable pin
New items
LV8731VGEVB, ON Semiconductor
The LV8731V is a 2-channel H-bridge driver IC that can switch a stepping motor driver, which is capable of micro-step drive and supports 1/16-step resolution, and two channels of a brushed motor driver, which supports forward, reverse, brake, and standby of a motor.
Single-channel PWM current control stepping motor driver (selectable with DC motor driver channel 2) incorporated
BiCDMOS process IC
Micro-step mode can be set to Full-step, Half-step, Quarter-step, or 1/16-step
Excitation step proceeds only by step signal input
Motor current selectable in four steps
Output short-circuit protection circuit (selectable from latch-type or auto-reset-type) incorporated
Unusual condition warning output pins
Built-in thermal shutdown circuit
No control power supply required
Pin compatibility series
New items
OC06, XinaBox
xChip Boards
xChips are a rapid electronics development ecosystem to help reduce development time and simplify making custom products as well as aiding learning. Without soldering, wiring, breadboarding, or hardware knowledge you can assemble a circuit in minutes, and concentrate on coding.
xChips are compatible with the platform you want to use and bridges are available for the most popular pltatforms; Raspberry Pi, Minnowboard, Beaglebone, Micro:bit, Pixhawk and 96 boards. Rather than bridging to Ardunio, we offer compatible cores for Arduino Uno, the CC01, and for Arduino Zero, the CC03.
xChips utilise I2C, and due to this bus architecture, unlimited expansion of circuits is possible. Limitations of I2C addresses have been negated by development multiplexers.
Because of its simple connection method, it is easy to build quickly - for prototyping and small product runs
xChips connect to each other using an xBus connector, available from RS
174-4977
.
Some xChips need an xPDI connector (RS
174-4974
) to connect to programming interfaces, such as the IP02 or IP03.
OC06 – Stepper Driver xChip (DRV8825, PCA9554A
This xChip is an output control module, based on the PCA9554A by Texas Instruments, which is an 8-bit I/O expander for the two-line bidirectional bus (I²C).
On this xChip, the PCA9554A drives the control signals of a DRV8825 Stepper Motor Controller. The PCA9554A accepts control commands through the I²C interface which provide the control signals to the DRV8825.
The DRV8825 provides an integrated motor driver solution for printers, scanners, and other automated equipment applications. The OC06 has one H-bridge driver and a microstepping indexer, and is intended to drive a bipolar stepper motor.
This xChip is capable of driving an individual stepper motor only. When more than one stepper motor is required, the physical address of the PCA9554A can be changed by soldering the I²C address selection pa...
New items
LV8727GEVB, ON Semiconductor
The LV8727 is a micro-stepping stepper motor driver for bipolar stepper motors controlled by PWM. This LV8727 supports eight micro stepping resolutions of Half, 1/8, 1/16, 1/32, 1/64, 1/128, 1/10 and 1/20, which is driven simply by step input.
New items
LV8829LFQAGEVK, ON Semiconductor
This kit makes it possible to operate the LSI evaluation board on your PC easily and quickly. We provide the board with the Daughter Board, the motor and the GUI that you can download from this site. We named the kit 'M-DrAGON'. It stands for Motor-Driver And GUI produced by ON Semiconductor. This kit contains, 1 LV8829LFQAGEVB Evaluation and Development Board, 1 Daughter Board, 1 BLDC motor, 1 USBA-to-USBminiB cable, GUI. Minimum system requirements 32bit Windows XP (SP3), 7, 8 or 64bit: Windows 7, Daughter Board, USB driver and GUI
New items
LB11696VGEVB, ON Semiconductor
The LB11696V is a direct PWM drive pre-driver IC designed for three-phase power brushless motors. A motor driver circuit with the desired output power (voltage and current) can be implemented by adding discrete transistors in the output circuits. Furthermore, the LB11696V provides a full complement of protection circuits allowing it to easily implement high-reliability drive circuits. This device is optimal for driving all types of large-scale motors such as those used in air conditioners and on-demand water heaters.
Three-phase bipolar drive
Direct PWM drive
Built-in forward/reverse switching circuit
Start/stop mode switching circuit
Built-in input amplifier
5V regulator output
Current limiter circuit
Under voltage protection circuit
Automatic recovery type constraint protection circuit with protection operating state discrimination output
Four types of Hall signal pulse output
Supports thermistor based thermal protection of the output transistors
New items
OC05, XinaBox
xChip Boards
xChips are a rapid electronics development ecosystem to help reduce development time and simplify making custom products as well as aiding learning. Without soldering, wiring, breadboarding, or hardware knowledge you can assemble a circuit in minutes, and concentrate on coding.
xChips are compatible with the platform you want to use and bridges are available for the most popular pltatforms; Raspberry Pi, Minnowboard, Beaglebone, Micro:bit, Pixhawk and 96 boards. Rather than bridging to Ardunio, we offer compatible cores for Arduino Uno, the CC01, and for Arduino Zero, the CC03.
xChips utilise I2C, and due to this bus architecture, unlimited expansion of circuits is possible. Limitations of I2C addresses have been negated by development multiplexers.
Because of its simple connection method, it is easy to build quickly - for prototyping and small product runs
xChips connect to each other using an xBus connector, available from RS
174-4977
.
Some xChips need an xPDI connector (RS
174-4974
) to connect to programming interfaces, such as the IP02 or IP03.
OC05 – Servo Driver xChip (PCA9685, BU33SD5)
This xChip is an output control module, based on the PCA9685 from NXP Semiconductors, which is an I²C-controlled Pulse Width Modulation or PWM controller with a built-in clock. This controller used as an interface to accurately drive up to 8 servo motors. The module accepts an input power source locally to drive the motors.
The OC05 xChip is a servo motor controller driver that uses the PCA9685 PWM controller as servo interface supported by a BU33SD5 regulator to drive and accurately control up to 8 servo motors on a single module and act as a system power supply. The module has 8 standard 2.54 mm (0.1) servo headers, plus 1 standard 2.54 mm (0.1) battery/BEC input header.
Product Features
● Servo motor controller/driver
● Connect up to 8 servos
● Standard 2/54 mm s...
New items
LV8760TGEVB, ON Semiconductor
The LV8760T is an H-bridge driver that can control four operation modes (forward, reverse, brake, and standby) of a motor. The low on-resistance, zero standby current, highly efficient IC is optimal for use in driving brushed DC motors for office equipment.
Forward/reverse H-bridge motor driver: 1 channel
Built-in current limiter circuit
Built-in thermal protection circuit
Built-in short-circuit protection function
New items
NCV7707GEVB, ON Semiconductor
The NCV7707GEVB Evaluation Board provides a convenient method to evaluate the NCV7707, which is a powerful driver for automotive body control systems. The device is designed to control several loads in the front foor of a vehicle. The monolithic IC is able to control mirror functions like mirror positioning, heating and folding including the electro-chromic mirror feature. Besides two half-bridge outputs to control lock and safe-lock motors, the device features four high-side outputs to drive LEDs or incandescent bulbs (up to 10W). To allow maximum flexibility, all lighting outputs can be PWM controlled thru PWM inputs (external signal source) or by an internal programmable PWM generator unit. The NCV7707 is controlled thru a 24 bit SPI interface with in-fram response.
New items
ADM00600, Microchip
MCP8025 BLDC Motor Driver Evaluation Board
The Microchip MCP8025 Brushless DC (BLDC) Motor Gate Driver Evaluation Board is a platform designed to demonstrate the drive capabilities of the MCP8025 motor driver device. The board utilises a dsPIC33EP256MC504 processor in combination with the MC8025 to implement a stand-alone 6-step trapezoidal BLDC motor controller.
The board has a terminal block to apply the input voltage with an output header and plated PCB through-hole pads as a means to connect the external motor. Two programming headers are provided for updating the dsPIC33EP256MC504 firmware using either a PICkit programmer/debugger or a MPLAB® in-circuit debugger. Another terminal is provided to allow users to create LIN communication connections to the MCP8025 LIN transceiver.
Features
Input operating voltage range: +6.0V to +19V
Pre-programmed dsPIC33EP256MC504 on board
Drives a three-phase BLDC motor up to 15A and 19V
ON/OFF momentary contact switch
Reset momentary contact switch
Spare user-programmable momentary contact switch
PWM signal LED indicators
PICkit 3 and MPLAB ICD 3 debugger interfaces
Speed control potentiometer
Terminal block for 5V and 12V Hall-effect sensors
LIN terminal block for user communications use
Configurable external MOSFET over-current protection
Configurable PWM dead-time protection
Configurable PWM blanking time for current switching spikes
Complete C source code (provided on the Microchip website)
Kit Contents
MCP8025 BLDC Motor Driver Evaluation Board
Note
Motor is not included
Motor Controllers & Drivers, Microchip