CAN Transceivers

New items

MCP2561FD-E/SN, Microchip

MCP2561/2562 CAN Transceivers CAN Bus Communication - Microchip

Product Detail

New items

MCP2562FD-E/MF, Microchip

MCP2561/2562 CAN Transceivers CAN Bus Communication - Microchip

Product Detail

New items

MAX13051ESA+, Maxim Integrated

Autobaud ModeShort-Circuit ProtectionHigh-Speed Operation Up to 1MbpsSlope-Control ModeLow-Current Standby ModeThermal ShutdownTransmit Data Dominant Timeout±6kV Human Body Model ESD ProtectionGreater than ±12V Common-Mode Range ApplicationsDevice Net NodesHVACIndustrial NetworksTelecom

Product Detail

New items

PCA82C251T/YM,112, NXP

CAN Controllers, NXP Note NXP is a trademark of NXP B.V. CAN Bus (Controller Area Network) Communication Controller Area Network (CAN or CAN-bus) is a computer network protocol and bus standard designed to allow microcontrollers and devices to communicate with each other without a host computer. It was designed specifically for automotive applications but is now also used in other areas. CAN transceivers allow protocol layer CAN controllers to access the physical layer bus.

Product Detail

New items

MAX3053ESA+T, Maxim Integrated

±80V Fault Protection Three Operating Modes High-Speed Operation up to 2Mbps Slope Control Mode to Reduce EMI (40kbps to 500kbps) 15μA Low-Current Shutdown Mode Autoshutdown when Device Is Inactive Automatic Wakeup from Shutdown Thermal Shutdown Current Limiting Applications HVAC Controls Industrial Control and Networks Printers Telecom 72V Systems

Product Detail

New items

PCA82C250T/YM,112, NXP

CAN Controllers, NXP Note NXP is a trademark of NXP B.V. CAN Bus (Controller Area Network) Communication Controller Area Network (CAN or CAN-bus) is a computer network protocol and bus standard designed to allow microcontrollers and devices to communicate with each other without a host computer. It was designed specifically for automotive applications but is now also used in other areas. CAN transceivers allow protocol layer CAN controllers to access the physical layer bus.

Product Detail

New items

MCP2562FD-E/P, Microchip

MCP2561/2562 CAN Transceivers CAN Bus Communication - Microchip

Product Detail

New items

MCP2561FD-E/MF, Microchip

MCP2561/2562 CAN Transceivers CAN Bus Communication - Microchip

Product Detail

New items

BD41000AFJ-CE2, ROHM

BD41000AFJ-C is a transceiver for the CXPI (Clock Extension Peripheral Interface) communication. Switching between Master/Slave Mode can be done using external pin (MS pin). Low power consumption during standby (non-communication) using Power Saving function. Arbitration function stops the data output upon detection of BUS data collision. Also Fail-safe function stops outputs upon detection of under voltage or temperature abnormality. Transmission speed range from 5kbps to 20kbps Master/Slave switching function Microcontroller interface corresponds to 3.3V/5.0V Built-in terminator (30kΩ) Power saving function Data arbitration function Built-in Under Voltage Lockout (UVLO) function Built-in Thermal Shutdown (TSD) function Low EME(Electromagnetic Emission) High EMI(Electromagnetic Immunity) High ESD(Electrostatic Discharge) robustness

Product Detail

New items