Line Transceivers

New items

MAX487CUA+, Maxim Integrated

The MAX481, MAX483, MAX485, MAX487–MAX491, and MAX1487 are low-power transceivers. Each part contains one driver and one receiver. Low Power Consumption Minimizes Thermal Dissipation, Reducing System Cost 120μA to 500μA Quiescent Current Shutdown Current of 0.1μA Single 5V Supply Voltage Slew-Rate-Limited Drivers (MAX483/MAX487/MAX488 and MAX489) Up to 250kbps Data Rate Unlimited Drivers: Up to 2.5Mbps Data Rate Integrated Protection Enhances System Robustness Short Circuit Current Limited Driver Integrated Thermal Shutdown Receiver Fail-Safe for Input Open Circuit Guarantees Logic High 1/4 Unit Loading (MAX487/ MAX1487 only) Allows Up to 128 Devices on a Single Bus 48kΩ Receiver Input Resistance Applications Industrial-Control Local Area Networks Level Translators Low-Power RS-422 Transceivers Low-Power Transceivers Transceivers for EMI-Sensitive Applications

Product Detail

New items

MAX3226EEUE+, Maxim Integrated

For Space-Constrained Applications: MAX3228E/MAX3229E: ±15kV ESD-Protected, +2.5V to +5.5V Transceivers in UCSP™ MAX3222E/MAX3232E/MAX3241E/MAX3246E: ±15kV ESD-Protected, Down to 10nA, +3.0V to +5.5V, Up to 1Mbps Transceivers (MAX3246E Available in UCSP) For Low-Voltage or Data Cable Applications: MAX3380E/MAX3381E: +2.35V to +5.5V, 1μA Transceivers with ±15kV ESD-Protected I/O and Logic Pins Applications/Uses Automotive Battery-Powered Equipment Cellular Phones Handheld Equipment Notebook, Subnotebook, and Palmtop Computers Peripherals Printers

Product Detail

New items

MAX3095CEE+, Maxim Integrated

ESD Protection: ±15kV Air-Gap Discharge ±8kV Contact Discharge ±15kV-Human Body Model Guaranteed Propagation-Delay Tolerance Between All ICs: ±8ns (MAX3095) ±10ns (MAX3096) Single +3V Operation (MAX3096) Single +5V Operation (MAX3095) 16-Pin QSOP (8-pin SO footprint) 10Mbps Data Rate Allow up to 128 Receivers on the Bus 1nA Low-Power Shutdown Mode 2.4mA Operating Supply Current Pin-Compatible Upgrades to '26LS32 Applications/Uses Level Translators Receivers for ESD-Sensitive Applications Rugged RS-422/RS-485/RS-423 Bus Receiver Telecommunications Equipment

Product Detail

New items

ADM2481BRWZ, Analog Devices

RS-485 Line Drivers and Receivers, Analog Devices RS-485 Line Drivers and Receivers

Product Detail

New items

MAX3089CSD+, Maxim Integrated

RS-485 Single Transmitters/Receivers, 5V, MAX3xxx Series, Maxim Integrated Note Please note that any defect or non – conformance of this product must be discovered and reported to RS within 20 days of purchase. RS-485 Line Drivers and Receivers

Product Detail

New items

LTC1483IS8#PBF, Analog Devices

RS-485 Line Drivers and Receivers, Linear Technology Linear Technology s RS485 standards are widely used in local networks as well as data transfer over long distances and they are ideal in industrial and commercial applications. The Profibus (Process Field Bus) protocol is carried out for fieldbus solutions in factory and process automation environments. The RS422 standard is similar to the RS485 standard but does not permit multiple drivers on a bus. The RS485 Transceiver (formally TIA-485) defines a differential data transmission up to 10Mbps.The low power CMOS RS485/RS422 Interface transceivers feature failsafe receivers, high voltage, high data rates, high ESD protection types and transceivers (TXRX) featuring pin-controlled switchable 120 Ohm termination resistors. Balanced line offers excellent noise rejection RS-485 Line Drivers and Receivers

Product Detail

New items

ADM3485ARZ-REEL7, Analog Devices

RS-485 Line Drivers and Receivers, Analog Devices RS-485 Line Drivers and Receivers

Product Detail

New items

ICL3232IBNZ-T, Renesas Electronics

RS-232 Line Drivers and Receivers, Intersil RS-232 transceivers available in many configurations, featuring data rates up to 1Mbps, IEC61000 ESD protection, low power shut down modes, and small QFN packages. RS-232 Line Drivers and Receivers

Product Detail

New items

ICL3221IAZ, Renesas Electronics

RS-232 Line Drivers and Receivers, Intersil RS-232 transceivers available in many configurations, featuring data rates up to 1Mbps, IEC61000 ESD protection, low power shut down modes, and small QFN packages. RS-232 Line Drivers and Receivers

Product Detail

New items

LTC2871IUHF#PBF, Analog Devices

RS-232/RS-485/RS-422 Transceivers, Linear Technology Linear Technology s RS232/RS485/RS422 multiprotocol transceivers allow protocol switching and switching between half/full-duplex operations. A broad range of computing applications require more protocols than the RS232 which switch at short range up to the differential long-range RS485 standard. · Software selectable protocol · Cable termination · Data terminal equipment (DTE) or data communications equipment (DCE) configuration Multiprotocol Transceivers

Product Detail

New items

MAX3237CAI+, Maxim Integrated

RS-232 Multi-Channel Transmitters/Receivers, Maxim Integrated Note Please note that any defect or non – conformance of this product must be discovered and reported to RS within 20 days of purchase. RS-232 Line Drivers and Receivers

Product Detail

New items

MAX241ECWI+, Maxim Integrated

RS-232 Multi-Channel Transmitters/Receivers, Maxim Integrated Note Please note that any defect or non – conformance of this product must be discovered and reported to RS within 20 days of purchase. RS-232 Line Drivers and Receivers

Product Detail

New Items

MAX487CUA+, Maxim Integrated

MAX3226EEUE+, Maxim Integrated

MAX3095CEE+, Maxim Integrated

ADM2481BRWZ, Analog Devices

MAX3089CSD+, Maxim Integrated

LTC1483IS8#PBF, Analog Devices

ADM3485ARZ-REEL7, Analog Devices

ICL3232IBNZ-T, Renesas Electronics

ICL3221IAZ, Renesas Electronics

LTC2871IUHF#PBF, Analog Devices

MAX3237CAI+, Maxim Integrated

MAX241ECWI+, Maxim Integrated

FAQs