Sensor Development Kits

New items

MIKROE-3769, MikroElektronika

The MikroElektronika TMR Angle Click is a click board which is used for developing applications that range from steering angle applications with the highest functional safety requirements to motors for wipers, pumps and actuators and electric motors in general. The TMR Angle click board is supported by a mikroSDK compliant library, which includes functions that simplify software development.

Product Detail

New items

BM1383AGLV-EVK-001, ROHM

BM1383AGLV is piezo-resistive pressure sensor. BM1383AGLV does temperature compensation for MEMS inside chip, so its very easy to get pressure information Piezo-resistive pressure sensor. Pressure range is from 300hPa to 1100hPa. Built-in temperature compensation function. I2C interface. Small package

Product Detail

New items

TOUCHLRACOMBOGEVB, ON Semiconductor

The TOUCHLRACOMBOGEVB demo showcases ON Semiconductor's High-Accuracy Capacitive Touch Sensor along with supporting devices to provide visual and audible feedback. Such devices include: Capacitance-Digital-Converter for Electrostatic Capacitance Touch Sensing (LC717A10AR), Linear Vibrator Driver (LC899301XA) and an 8-bit Microcontroller (LC87F1M16A).ON Semiconductor's highly integrated capacitance-to-digital converter IC speeds up implementation and reduces component count of electrostatic capacitance touch sensor applications.

Product Detail

New items

NCS36000GEVB, ON Semiconductor

The NCS36000GEVB is designed to quickly test the NCS36000, a fully integrated mixed-signal CMOS device designed for low-cost passive infrared controlling applications.

Product Detail

New items

VCNL4020-SB, Vishay

The VCNL4020 is a fully integrated proximity and ambient light sensor. Fully integrated means that the infrared emitter is included in the package. It has 16 bit resolution. It includes a signal processing IC and features standard I2C communication interface. It features an interrupt function. Package type: surface-mount Dimensions (L x W x H in mm): 4.90 x 2.40 x 0.83 Integrated modules: infrared emitter (IRED), ambient light sensor (ALS-PD), proximity sensor (PD), and signal conditioning IC Interrupt function Supply voltage range VDD: 2.5 V to 3.6 V Supply voltage range IR anode: 2.5 V to 5 V Communication via I2C interface I2C bus H-level range: 1.7 V to 5 V

Product Detail

New items

VCNL4035X01-SB, Vishay

Product Detail

New items

SEK002, Honeywell

Honeywell SEK002 Sensor Evaluation Kit Pressure Sensors, Honeywell

Product Detail

New items

TLV493DA1B6MS2GOTOBO1, Infineon

The 3D Magnetic Sensor 2GO is a budget-priced evaluation board equipped with a magnetic sensor for three dimensional measurement combined with an ARM® Cortex™-M0 CPU. The 3D Magnetic Sensor 2GO has a complete set of on-board devices, including an on-board debugger. Build your own application and gadget with the 3D Magnetic Sensor 2GO. TLV493D-A1B6 (three dimensional magnetic sensor) XMC1100 (ARM® Cortex™-M0 based) On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller) Power over USB (Micro USB), ESD and reverse current protection GUI for free download

Product Detail

New items

DPP903M000, TE Connectivity

TE Connectivity (TE) offers the MEAS PICTAIL PLUS in order to simply measure pressure, temperature and/or humidity.

Product Detail

New items

MIKROE-3057, MikroElektronika

Buck 9 Click is a high-efficiency step-down converter which provides a highly regulated output voltage derived from the connected power source, rated from 4V to 36V. The regulated output voltage can be selected between two values: 3.3V and 5V. These are voltage values that are most commonly used in many embedded designs. Buck 9 click is based around an integrated DC-DC converter, labeled as MP9943. Due to its high efficiency, MP9943 allows the Click board™ to easily deliver up to 3A of current. The MP9943 is very reliable, offering over-current and under-voltage protection, as well as a thermal shutdown.Buck 9 click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket. Vertically oriented pockets and holders for easy access

Product Detail

New items

MIKROE-3414, MikroElektronika

SAML Touch Click is a Click board™ equipped with two capacitive touch pads and one capacitive slider. There are also LED indicators, which are used to indicate touch evens for each of the available touch components: two LEDs (one for each touchpad), and one six-segment bargraph, used to indicate touch position across the slider. SAML click is based on the ATSAML10 MCU, an ultra-low power 32-bit ARM® Cortex® MCU, equipped with the Peripheral Touch Controller (PTC). SAML click is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.

Product Detail

New items

1-2314291-1, TE Connectivity

Design resources are freed and time to market is accelerated Simplicity of popular I2C communication protocol Space saving compact design Multiple attach methods to accommodate your application need One footprint allows multiple sensor configurations & flexibility in design Applications Indoor Lighting Building Automation Connected Home Air Quality Energy Management Work Space Comfort Zonal Environmental Controls

Product Detail

Sensor Development Kits

New Items

MIKROE-3769, MikroElektronika

BM1383AGLV-EVK-001, ROHM

TOUCHLRACOMBOGEVB, ON Semiconductor

NCS36000GEVB, ON Semiconductor

VCNL4020-SB, Vishay

VCNL4035X01-SB, Vishay

SEK002, Honeywell

TLV493DA1B6MS2GOTOBO1, Infineon

DPP903M000, TE Connectivity

MIKROE-3057, MikroElektronika

MIKROE-3414, MikroElektronika

1-2314291-1, TE Connectivity

FAQs