Network Cable Tester

Ideal Networks NaviTEK NT Network Tester Kit NaviTEK NT network testers are for troubleshooting and maintaining active and passive copper and fibre networks. They incorporate an improved graphical interface which enables network technicians to pinpoint and solve network connectivity issues faster than ever before. Tests can be saved as pdf reports and shared with colleagues and clients using the freely downloadable IDEAL AnyWare™ app. The choice of NaviTEK NT model ranges from this model, the NaviTEK NT Network Tester Kit R153001 ( 897-7157 ) to the higher spec NaviTEK NT Plus Ethernet Tester Kit R151003 ( 897-7166 ) and the highest spec NaviTEK NT Pro LAN Network Tester Kit R151004 ( 897-7169 ). NaviTEK NT Functionality • Copper and fibre test interfaces • Fast detection of link and IP information including duplex, speed, port ID, VLAN, • DNS, DHCP, Gateway status and IP address • Detects services such as ISDN, POTS and PoE • Accurate wire mapping including length measurement and distance to fault • Rugged, compact design permits use in confined spaces • Not susceptible to virus and malware attack NaviTEK NT offers a suite of test and troubleshooting functionality only found on dedicated hand-held testers. NaviTEK NT Features • Advanced wiremap for miswires, split pairs, opens and shorts • Distance to opens and shorts (TDR) • PoE/PoE+ detection • Tone generator for cable tracing • Ping and Traceroute testing • Hub blink for port identification • DHCP client • Switch detection - 10/100/1000 Mb/s • User-exchangeable RJ45 inserts • Support for up to 12 wiremap remotes • Backlit colour screen Performs tests for copper cabling and networks, including display network configuration (IPv4 /IPv6 compatible). NaviTEK NT LAN Network Tester - ( 897-7157 ) NaviTEK NT Plus Ethernet Tester Kit ...

Amprobe LAN-1 Network Cable Tester Designed to work with various data cables and connectors, this cable tester provides a fast go / no-go LED display. It has the ability to either step through the test cable wiring one at a time or have the unit automatically pulse through the pin-outs to display the results. Test opens, shorts and miswired cables, verify the wiring for continuity on wall plate or patch panels. Features and Benefits: • Loopback test or remote test • Buzzer sound for errors in the cable • 300m maximum line length • Approx. 20 hour battery life • 2 sets of LED, signal and test Frequently asked questions: What is a LAN cable tester? LAN testers are devices that allow a user to verify and test a connection or signal within a data cable. The types of tests include whether the cable is set up correctly, connected, the strength or speed of the signal being sent through the cable. How do network cable testers work? Usually made up of 2 sections or 2 boxes, a network cable tester will have a receiver and a transmitter. A cable is then connected directly or with connectors to both for testing. Once the tester is switched on a signal or data is sent via the cable and a report or the results are shown on the receiver. Receivers comes in a variety of types, shapes and sizes and therefore the results may vary in the way they are displayed. Some have LED's, some show patterns in lights and some different colours. The tester instruction manual will show what the results mean but some testers help determine the connection speed and detect problems. What is the difference between RJ45 & RJ11? RJ45 is an 8-pin connector whereas RJ11 is only a 4 wire connector. RJ45 is used in Ethernet connections to connect computers to networks. RJ11 is more of a conventional telephone wire used to bring fibre into your hou...

RS Pro Network Cable Tester Our RS pro network cable tester makes a perfect edition to your kit. Our network cable tester comprehensively tests each twisted pair through RJ45 or RJ11 connectors. It comes with remote end terminator for testing link patch cords. A super simple LED light system notifies you of which pairs are fully functional and which are faulty. Features and benefits- •Super easy to read LED system that will show you what is functional and non-functional. •Test’s for faults such as: mis-wiring, short, reversed wires or broken connections. •Use with RJ45 connectors •Adapters are included for RJ11 •No need for a power supply, only a 9V battery. •Operating temperature of -20 to 60 °C. •Simplified for easy use so there is no complications This easy to use network cable tester can be used at home or in the workplace for testing your networking cables. If you wire your own Ethernet cables this will be a great help in diagnosing a problem if one occurs. FAQ (Frequently Asked Questions) What is the difference between RJ45 & RJ11? RJ45 is an 8-pin connector where as RJ11 is only a 4 wire connector. RJ45 is used in Ethernet connections to connect computers to networks. RJ11 is more of a conventional telephone wire used to bring fibre into your house. RJ is the abbreviation of ’registered jack’. What is included in the box? The box contains: Network tester, remote end terminator, two RJ11 adaptors and an instruction manual. Need a crimping tool or RJ connectors? Crimping tool: 829-6527 RJ45 Connectors: 331-6386 RJ11 Connectors: 331-6342 Note Does not include 9 V battery (required).