Voltage Indicator & Proving Unit Kits

Martindale Voltage Indicator and Proving Unit Kit MARVT25/PD Before carrying out any maintenance or repairs on electrical equipment it is essential that all the circuitry is isolated and safe to work on. Electricians, engineers, and technicians must be safe in the knowledge that all checks have been made, in accordance with the Electricity at Work Regulations. The Martindale VT25/PD kit is a CAT IV 600V and 1000v CATIII approved kit that complies with BS EN61243-3. The electrical test kit comprises of the VT/25 voltage indicator and the PD690 proving unit. Supplied in the TC70 combination soft carry case with convenient neck strap, the quality kit ensures your electrical test equipment is always at hand, ready to use. VT25 Voltage indicator Compact and lightweight, the Martindale two-pole VT25 voltage indicator is designed for use on AC or DC systems. The voltage indicator uses bright LED’s to clearly display voltages ranging from 12V to 690V. In addition, the voltage tester also can check continuity, phase rotation testing and single-pole voltage detection. With double insulated cable and removable probe caps, the VT25 voltage indicator complies with the health and safety recommendations for safe working. The ideal tool for conducting safe isolation procedures. A built-in bright white LED torch also provides extra light when used dark or low light conditions. Features and Benefits • Ergonomically designed for maximum comfort • Complies with BS EN61243-3 and GS38 • AC/DC indication from 12 to 690V • Continuity – Audible buzzer and optical LED • Single pole phase test 90 to 690V • Phase rotation test 120 to 400V • Built-in torch for low light or dark conditions • Double insulated cable • IP64 ingress protection • Auto power off • Powered by 2 x 1.5v AAA batteries PD690 Proving Unit The Martindale PD690 is a proving device rated to 700 Volts...

VIPDLOKPRO150 Voltage Indicator, Proving Device and Lock Out Kit Martindale VIPDLOKPRO150 kit contains the VI-15000 690 V voltage indicator, matching PD690 proving unit and the LOKKITPRO, ultimate lock out kit. The kit ensures you are never short of the right device to lock out safely, prove dead and achieve compliance when carrying out maintenance and installation of plant and equipment. The voltage indicator fully complies with the latest edition of GS38 and with a 1000 V CAT IV safety rating is suitable for use in all installation categories. The voltage indicator and proving unit are supplied in a TC69 combination carry case to ensure that the proving unit is always to hand. For convenience and to save time, the proving unit can be used without having to remove it from the case. In addition to the VI-15000 and PD690, the kit includes the following locking off devices: • 1 x Padlock with unique key (PAD10R) • 1 x Cartridge fuse isolation lock (LOK6) • 1 x Cable lock-off (CABLOK) • 1 x Hasp (LOKHASP25) • 1 x Plunge locking piece (LOK15) • 1 x Appliance plug lock out (PL13) • 1 x MCB green isolation lock (LOK1) • 1 x MCB yellow isolation lock (LOK2) • 1 x MCB blue isolation lock (LOK3) • 1 x MCB small red isolation lock (LOK4) • 1 x MCB red isolation lock (LOK5) • 1 x Slimline grey isolation lock (LOK7) • 1 x Yellow MCB lock, 10mm clip (LOK10) • 1 x Red MCB lock, 6mm clip (LOK11) • 5 x “Equipment locked out tags” which can be written on (TAG4) • 1 x Black marker pen (LOKMP) ...

Martindale SMKIT5 Smart Metering Kit The SMKIT5 contains all the test tools needed to ensure safe isolation procedures can be implemented during the installation process. SMKIT5 Smart Metering Kit with TEK101, VT7, MTL10, PD440, and TC70. The comprehensive kit includes a non-contact voltage indicator with probe tip for identifying phase and neutral lines and a single pole contact voltage tester suitable for use when wearing protective gloves and gauntlets For CAT IV supply side safe isolation testing there is a Drummond test lamp with proving device Supplied with TEK101 Non-contact voltage indicator with built in proving device, VT7 Single Pole Contact Voltage Tester suitable for use when wearing PPE, MTL10 Drummond AC/DC Test Lamp 600V CAT IV, PD440 Proving Device, TC70 Combination soft carry case. Martindale Lock-Off Kits, Voltage Indicators and Proving Units

Martindale Voltage Indicator and Proving Unit Kit MARVT28/PD Before carrying out any maintenance or repairs on electrical equipment it is essential that all circuitry is isolated and safe to work on. Electricians, engineers, and technicians must be safe in the knowledge that all checks have been made, in accordance with the Electricity at Work Regulations. The Martindale VT28/PD kit is a CAT IV 600V and 1000v CATIII approved kit that complies with BS EN61243-3. The electrical test kit comprises of the VT28 voltage indicator and the PD690 proving unit. Supplied in the TC70 combination soft carry case with convenient neck strap, the quality kit ensures your electrical test equipment is always at hand, ready to use. VT28 Voltage Indicator Compact and lightweight, the Martindale two-pole VT28 voltage indicator is designed for use on AC or DC systems. The voltage indicator features a dual LED and LCD display ensuring tests are easily viewed on the front of the device. Bright LED’s clearly display voltages ranging from 12V to 690V, along with a clear readout on the 4-digit LCD display. In addition, the voltage tester also can check continuity, phase rotation testing and single-pole voltage detection. With double insulated cable and removable probe caps, the VT28 voltage indicator complies with the health and safety recommendations for safe working. The ideal tool for conducting safe isolation procedures. A built-in bright white LED torch also provides extra light when used dark or low light conditions. Features and Benefits • Ergonomically designed for maximum comfort • Complies with BS EN61243-3 and GS38 • AC/DC indication from 12 to 690V • LED indication and LCD display • Continuity – An audible buzzer and optical LED • Single pole phase test 100 to 690V • Phase rotation test 120 to 400V • Built-in torch for low light or dark conditions • Double insulated cable • IP64 ingres...

VIPDLOKPRO138 Voltage Indicator, Proving Device and Lock Out Kit Martindale VIPDLOKPRO138 kit contains the VI13800 400 V voltage indicator, matching PD440 proving unit and the LOKKITPRO ultimate lock-out kit. The kit ensures that you are never short of the right device to lock-out safely, prove dead and achieve compliance when carrying out maintenance and installation of plant and equipment. The voltage indicator fully complies with the latest edition of GS38 and can be used in installation categories up to 600 V CAT IV. The voltage indicator and proving unit are supplied in a TC69 combination carry case to ensure that the proving unit is always to hand. For convenience and to save time, the proving unit can be used without having to remove it from the case. In addition to the VI13800 and PD440, the kit includes the following locking • 1 x Padlock with unique key (PAD10R) • 1 x Cartridge fuse isolation lock (LOK6) • 1 x Cable lock-off (CABLOK) • 1 x Hasp (LOKHASP25) • 1 x Plunge locking piece (LOK15) • 1 x Appliance plug lock-out (PL13) • 1 x MCB green isolation lock (LOK1) • 1 x MCB yellow isolation lock (LOK2) • 1 x MCB blue isolation lock (LOK3) • 1 x MCB small red isolation lock (LOK4) • 1 x MCB red isolation lock (LOK5) • 1 x Slimline grey isolation lock (LOK7) • 1 x Yellow MCB lock, 10 mm clip (LOK10) • 1 x Red MCB lock, 6 mm clip (LOK11) • 5 x “Equipment locked out tags” which can be written on (TAG4) • 1 x Black marker pen (LOKMP) • 1 x TC...