Oscilloscope Probes

New items

MX9030-Z, Metrix

30 & 50 MHz differential probes for MX 9030-Z, MTX 1032-B and MTX 1032-C oscilloscopes An indispensable accessory for analogue or digital oscilloscopes to visualise signals that are not referenced to the ground! A range of three models to fulfil different requirements. 1 or 2 input channels. Coaxial or banana measuring leads/long length banana leads. A model with coaxial inputs that can be used with oscilloscope probes. 30 MHz or 50 MHz bandwidth. Mains or battery power (depending on model). Presented in laboratory casing or handheld probe with wrist strap. Input voltage differential range of ±0.1 → ±600 V (depending on model). Meets standards up to 600 V - CAT IV (depending on model). Compatible with all types of class 1 oscilloscope. Mechanical compatibility with oscilloscopes from the MTX family. Conforms to DBT safety standards in accordance with IEC 61010-1 (2001). Conforms to CEM standards in accordance with NF EN 61326-1 (07/97) + A1 (10/98) + A2 (2001).

Product Detail

New items

MTX1032-B, Metrix

30 & 50 MHz differential probes for MX 9030-Z, MTX 1032-B and MTX 1032-C oscilloscopes An indispensable accessory for analogue or digital oscilloscopes to visualise signals that are not referenced to the ground! A range of three models to fulfil different requirements. 1 or 2 input channels. Coaxial or banana measuring leads/long length banana leads. A model with coaxial inputs that can be used with oscilloscope probes. 30 MHz or 50 MHz bandwidth. Mains or battery power (depending on model). Presented in laboratory casing or handheld probe with wrist strap. Input voltage differential range of ±0.1 → ±600 V (depending on model). Meets standards up to 600 V - CAT IV (depending on model). Compatible with all types of class 1 oscilloscope. Mechanical compatibility with oscilloscopes from the MTX family. Conforms to DBT safety standards in accordance with IEC 61010-1 (2001). Conforms to CEM standards in accordance with NF EN 61326-1 (07/97) + A1 (10/98) + A2 (2001).

Product Detail

New items

TPP0051, Tektronix

Tektronix 50MHz BNC Passive Probe TPP0051 The Tektronix TPP0051 passive voltage probe is for use on BNC oscilloscopes with 1MΩ/20pF inputs, including Tektronix TBS1000B and TBS1000B-EDU series. Applications cover low-frequency measurements, low-frequency computer and telecom measurements, power supplies and low-frequency amplifiers. 10X attenuation 50 MHz bandwidth 3.2% accuracy Tektronix Oscilloscope Probes The Tektronix passive voltage oscilloscope probe is for use on BNC oscilloscopes with 1Mohm/20pF input. It has an attenuation of 10X with 10Mohm input resistance. Note: All the products in this range are supplied for use with instruments with a permanent earth connection. Features and Benefits Bandwidth is DC to 50MHz Attenuation ratio is 1:10 Input impedance is 10Mohmll12pF Cable length is 1.3m Maximum common-mode input voltage is 300KV Maximum Input voltage is 300VRMS CAT II Wide compensation ranges between 15pF and 25pF) Applications Relative low frequency measurements Low frequency computer and telecom measurements Power supplies Low frequency amplifiers Certifications UL61010-031 approved 2007, CAN/CSA C22.2 No. 61010-031-07 certified IEC61010-031 IEC 61010-031/A1:2008 CAT II 300V Passive Oscilloscope Probes Note All the products in this range are supplied for use with instruments with a permanent earth connection.

Product Detail

New items

HVD3106A-NOACC, Teledyne LeCroy

Teledyne LeCroy HVD3000A Series Probes Teledyne LeCroys HVD3106A series of high voltage differential probes cover the fullest range of applications, from 120/240 V switch-mode power supplies through 600 V class and 1.5 kV electrical apparatus. The 1% gain accuracy coupled with exceptional common-mode rejection ratio provides an accurate and versatile probe suitable for use with a wide range of oscilloscopes Features and Benefits Exceptional common-mode rejection ratio (CMRR) across a broad frequency range 1% gain accuracy High offset capability at both high and low attenuation AC and DC coupling ProBus active probe interface with automatic scaling AutoZero with auto disconnect switch Wide oscilloscope compatibility Applications Applications Automotive Power Applications Motor Drive Development Product Design Applications 174-8868 - 1kV, 120 MHz High Voltage Differential Probe without tip Accessories and with Auto Zero Disconnect 174-8869 1kV, 120 MHz High Voltage Differential Probe with Auto Zero Disconnect 174-8870 - 1kV, 80 MHz High Voltage Differential Probe with 6m cable and Auto Zero Disconnect Supplied with 174-8869 and 174-8870 are supplied with = a Pair of Red & Black 1000V Safety Alligator Clips, Plunger Pincer Clips, Plunger Hook Clips, Plunger Alligator Clips and Spade Terminals

Product Detail

New items

TLP058, Tektronix

8 channel general purpose logic probe for 5 and 6 Series MSO oscilloscopes. Includes accessory kit.

Product Detail

New items

PP018-1, Teledyne LeCroy

Teledyne LeCroy High Definition Oscilloscopes

Product Detail

New items

ZS1000, Teledyne LeCroy

Teledyne LeCroy ZS Series High Impedance Active Probes The Teledyne LeCroy ZS Series of easy-to-use probes provide high impedance along with an extensive set of probe tips and ground accessories to handle wide-ranging probing scenarios. The high 1 MΩ input resistance and low 0.9 pF (0.6 pF with ZS4000) input capacitance means these probes are excellent for all frequencies. The ZS Series probes provide full system bandwidth with all Teledyne LeCroy oscilloscopes featuring bandwidths of 4 GHz and lower. Small form combines with an extensive standard range of tip accessories to facilitate use in challenging situations as well as in probing test points spaced apart. Features and Benefits High signal fidelity to 4 GHz bandwidth Low circuit loading – high input impedance and low capacitance Choice of 4 GHz, 2.5 GHz and 1 GHz models 1 MΩ input resistance 0.6 pF (4 GHz) and 0.9 pF input capacitance ± 8 V input dynamic range, ± 12 V offset range Integrated with oscilloscope (ProBus interface for control from oscilloscope front panel) Wide variety of tips and grounds included Applications Automotive Power applications Motor drive development Product design applications Note The ZS1000 is ideal for 200 → 600 MHz oscilloscopes Supplied with Square pin adapter, IC tip, bent tip, channel ID clips (set of 4 colours), copper tape pad (x2), freehand probe holder, ground blade (narrow), ground blade (wide), micro-grabber (pair), offset ground-Z lead, pogo ground lead, pogo tip, probe tip - standard (x3), right angle lead (long), right angle lead (short), right angle socket, straight pin lead (long), straight pin lead (short), Y-lead adapter

Product Detail

New items

TT-SI 9010, Testec

Differential Probes SI 9010/9110/9101 Supplied with Probe, 4 x AA batteries, instructions (also supplied with 9101: mains adapter and storage case) Testec oscilloscope probes The Testec is an active differential oscilloscope probe that enables a conventional oscilloscope to display and measure in-circuit waveforms that are referenced to high common-mode voltages. It is capable of safely measuring differential voltages up to ±2500V AC and 7000VAC/DC. It supports bandwidths up to 70MHz. Supplied with: Probe, 4 x AA batteries, instructions (also supplied with 9101: mains adapter and storage case) Features and Benefits Bandwidth is DC to 70MHz Attenuation is 1:100/1:1000 Rise time is 5ns Differential mode input voltage is 1:100 ±700V (DC+peak AC) or 700Vrms 1:1000 ±7000V (DC+peak AC) or 5000Vrms Input impedance is 10Mohm ll10pF each side to ground Common mode voltage range is 1:100 and 1:1000 ±7000V (DC+peak AC) or 2500Vrms Non-destructive max. input voltage is 1:100 and 1:1000 ±7000V (DC+peak AC) or 2500Vrms CMRR (typical) is -80dB at 50Hz and -60dB at 20kHz Offset (typical) is Noise (typical) is 0.9mVRMS Applications Performance conversion Inverters Motor speed indicators Switch mode power supplies Certifications CAT I 2500 VAC CAT II 7000 VAC/DC

Product Detail

New items

THDP0200, Tektronix

Tektronix High Voltage Differential Probes TMDP, THDP and P52xxA Series Tektronix high voltage probing solutions offer safety and accuracy in applications which include: floating measurements; switching power supply design; motor drive design; electronic ballast design; CRT display design; power converter design and service; power device evaluation. Overrange indicator Safety certified Switchable attenuation Switchable bandwidth limit Cable length 1.5m (THDP & TMDP), 1.8m (P52xxA) Note TMDP and THDP Series probes have the TekVPI® interface which enables smart communication between oscilloscope and probe - each TekVPI probe features controls and indicators located on the probe compensation box, designed to provide quick and easy access to the probe's most commonly required setup controls and operating status. P52xxA Series probes have the Tektronix TekProbe® interface which communicates scale information to the oscilloscope. Tektronix high voltage differential probes include: TMDPO200 ( 752-7366 ); THDPO200 ( 752-7357 ); THDP0100 ( 752-7353 ); P5200A ( 734-5029 ); P5202A ( 734-5022 ); P5205A ( 734-5026 ); P5210A ( 734-5035 ). Tektronix Oscilloscope Probes The Tektronix is an active differential oscilloscope probe capable of safely measuring differential voltages up to ±1500V. This probe is effective in making measurements in IGBT circuits such as motor drives and power converters. It supports bandwidths up to 200MHz and slew rates up to 275V/ns at 1/250 gain. A broad portfolio of high-voltage probing solutions that enable users to safely and accurately make floating measurements. Note: TMDP and THDP Series probes have the TekVPI® interface which enables smart communication between oscilloscope and probe - each TekVPI probe features controls and indicators located on the probe compensation box, designed to provide quick and easy access to ...

Product Detail

New items

HVD3102A-NOACC, Teledyne LeCroy

Teledyne LeCroy HVD3000A Series Probes Teledyne LeCroys HVD3102A series of high voltage differential probes cover the fullest range of applications, from 120/240 V switch-mode power supplies through 600 V class and 1.5 kV electrical apparatus. The 1% gain accuracy coupled with exceptional common-mode rejection ratio provides an accurate and versatile probe suitable for use with a wide range of oscilloscopes. Features and Benefits Exceptional common-mode rejection ratio (CMRR) across a broad frequency range 1% gain accuracy High offset capability at both high and low attenuation AC and DC coupling ProBus active probe interface with automatic scaling AutoZero with auto disconnect switch Wide oscilloscope compatibility Applications Automotive Power Applications Motor Drive Development Product Design Applications 174-8866 1kV, 25 MHz High Voltage Differential Probe without tip Accessories and with Auto Zero Disconnect 174-8867 - 1kV, 25 MHz High Voltage Differential Probe with Auto Zero Disconnect. 901-1043 - High voltage replacement probe accessory set Supplied with 174-8867 is supplied with a Pair of Red & Black 1000V Safety Alligator Clips, Plunger Pincer Clips, Plunger Hook Clips, Plunger Alligator Clips and Spade Terminals

Product Detail

New items

TT-SI 9101, Testec

Differential Probes SI 9010/9110/9101 Supplied with Probe, 4 x AA batteries, instructions (also supplied with 9101: mains adapter and storage case) Testec oscilloscope probes The Testec is an active differential oscilloscope probe that enables a conventional oscilloscope to display and measure in-circuit waveforms that are referenced to high common-mode voltages. It is capable of safely measuring differential voltages up to ±1000V AC. It supports bandwidths up to 100MHz. Supplied with: Probe 4 x AA batteries Instructions (also supplied with 9101: mains adapter and storage case) Features and Benefits Bandwidth is DC to 100MHz Attenuation is 1:10/1:100 Rise time is 3.5ns Differential mode input voltage is 1:10 ±70V (DC+peak AC) or 70Vrms 1:100 ±700V (DC+peak AC) or 700Vrms Input impedance is 4Mohm ll7pF each side to ground Common mode voltage range is 1:10 ±700V (DC + peak AC) or 700Vrms 1:100 ±700V (DC + peak AC) or 700Vrms Non-destructive Max input voltage is 1:10 ±1000V (DC+peak AC) or 1000Vrms 1:100 ±1400V (DC+peak AC) or 1000Vrms CMRR (typical) is -85dB at 50Hz and -55dB at 1MHz Offset (typical) is Noise (typical) is 0.9mVRMS Applications Performance conversion Inverters Motor speed indicators Switch mode power supplies Certifications CAT III 1000VAC

Product Detail

New items

HVD3106A-6M, Teledyne LeCroy

Teledyne LeCroy HVD3000A Series Probes Teledyne LeCroys HVD3106A series of high voltage differential probes cover the fullest range of applications, from 120/240 V switch-mode power supplies through 600 V class and 1.5 kV electrical apparatus. The 1% gain accuracy coupled with exceptional common-mode rejection ratio provides an accurate and versatile probe suitable for use with a wide range of oscilloscopes Features and Benefits Exceptional common-mode rejection ratio (CMRR) across a broad frequency range 1% gain accuracy High offset capability at both high and low attenuation AC and DC coupling ProBus active probe interface with automatic scaling AutoZero with auto disconnect switch Wide oscilloscope compatibility Applications Applications Automotive Power Applications Motor Drive Development Product Design Applications 174-8868 - 1kV, 120 MHz High Voltage Differential Probe without tip Accessories and with Auto Zero Disconnect 174-8869 1kV, 120 MHz High Voltage Differential Probe with Auto Zero Disconnect 174-8870 - 1kV, 80 MHz High Voltage Differential Probe with 6m cable and Auto Zero Disconnect Supplied with 174-8869 and 174-8870 are supplied with = a Pair of Red & Black 1000V Safety Alligator Clips, Plunger Pincer Clips, Plunger Hook Clips, Plunger Alligator Clips and Spade Terminals

Product Detail

New Items

MX9030-Z, Metrix

MTX1032-B, Metrix

TPP0051, Tektronix

HVD3106A-NOACC, Teledyne LeCroy

TLP058, Tektronix

PP018-1, Teledyne LeCroy

ZS1000, Teledyne LeCroy

TT-SI 9010, Testec

THDP0200, Tektronix

HVD3102A-NOACC, Teledyne LeCroy

TT-SI 9101, Testec

HVD3106A-6M, Teledyne LeCroy

FAQs