Contact Blocks & Light Blocks

New items

LPXLPBB3, Lovato

Accessories A range of accessories designed for use with the Lovato Platinum 22mm push button, selector switch and control station series.

Product Detail

New items

LPXCB10, Lovato

Accessories A range of accessories designed for use with the Lovato Platinum 22mm push button, selector switch and control station series.

Product Detail

New items

LPXLPBB6, Lovato

Accessories A range of accessories designed for use with the Lovato Platinum 22mm push button, selector switch and control station series.

Product Detail

New items

LPXLPBB4, Lovato

Accessories A range of accessories designed for use with the Lovato Platinum 22mm push button, selector switch and control station series.

Product Detail

New items

Accessories The following accessories are available for the ZB6 Range: Lamp holder T1 1/4 24V, will not accept contact blocks Bezel keys (tools) Lens extractor Connector for PCB mounting Bulbs LEDs Labelling software Sheets of peel-off legend labels for use with software Windows software to custom design legend labels for the entire 16mm range 13 different languages Standard legends and customising facility 36 in text 224 in schematic 10 sheets of 40 labels per pack Schneider Electric ZB6 Harmony 16mm A range of IP65 protected components which are easily and quickly mounted in 16mm diameter holes. Each component can be ordered separately to build the required device. Also available are contact blocks with slow-break positive opening contacts with Faston/solder connections. Rating U e 250Vac, Ie 1.5A; Ue 250Vdc, Ie 0.1A, Io A I th operating temp. -25 to +70°C.

Product Detail

New items

ZBE502, Schneider Electric

High Power Switching Contact Blocks Direct assembly on the base plate Note It is not possible to fit an additionnal contact block on the back of these contact blocks or to use these contacts with light blocks.

Product Detail

New items

A22NZ-S-P1AN, Omron

A22E Screw Terminal Block types Increase wiring efficiency with three-row mounting of Switch Units. (with non-lighted Switch Blocks, three Units can be mounted for multiple contacts). Mounted using either open-type (fork-type) or closed-type (round-type) crimp terminals. Oil-resistant A lock plate is provided as a standard feature to ensure that the control box and switch are not easily separated. A22NE-P Push-In Plus technology The small size of the control panel is realized by conserving space and changing the direction of the wiring. Since there is no looseness in the wiring, there is a reduction in the maintenance efforts. A lock lever mechanism that can be easily operated is adopted. A maximum of up to six contact points can be combined together in the contact-point configuration. Oil-resistant. Supports high-temperature, high-pressure cleaning (pushpull models).

Product Detail

New items

A22NZ-S-P1BN, Omron

A22E Screw Terminal Block types Increase wiring efficiency with three-row mounting of Switch Units. (with non-lighted Switch Blocks, three Units can be mounted for multiple contacts). Mounted using either open-type (fork-type) or closed-type (round-type) crimp terminals. Oil-resistant A lock plate is provided as a standard feature to ensure that the control box and switch are not easily separated. A22NE-P Push-In Plus technology The small size of the control panel is realized by conserving space and changing the direction of the wiring. Since there is no looseness in the wiring, there is a reduction in the maintenance efforts. A lock lever mechanism that can be easily operated is adopted. A maximum of up to six contact points can be combined together in the contact-point configuration. Oil-resistant. Supports high-temperature, high-pressure cleaning (pushpull models).

Product Detail

New items

8LM2TC10, Lovato

Operational characteristics Any mounting position allowed The adapter is fixed to the mounting surface by means of incorporated screws (Tmax =0.8Nm/0.591bft ) also internally on LPZ control stations covers Contact elements snap onto the adapter Maximum tightening torque for screw terminals: 1Nm Ambient conditions: Operating temperature: -25 ...+60°C Storage temperature: -40...+70°C Degree of protection: Contacts elements with screw termination Contact elements with Faston termination

Product Detail

New items

LPXLPE5, Lovato

Rated frequency: 50-60Hz Auxiliary supply voltage: LPX LP... with steady light: 12...30VAC/DC 85...140VAC 185...265VAC Maximum consumption for: LPX LP... steady light and LPX LF... flashing Iight: 17mA-0.50W (12...30VAC/DC) 20mA-0.40W (85...140VAC) 18mA-0.55W (185...265VAC) Total protection for LPX LP... and LPX LF... types: Against overvoltages Against stray currents in wiring To reduce flickering phenomenon To withstand vibrations Electrical life: 100,000 hours Snap onto LPX AU120 mounting adapter in the middle position for each illuminated actuator, also internally on the LPZ control station cover No other element can be stacked behind LED elements Any mounting position allowed Maximum tightening torque: 1Nm/0.741bft Ambient conditions: Operating temperature: -25 ...+70°C (-25...+60°C for LPX LE...) Storage temperature: -40...+85°C

Product Detail

New items

LPXLPBM3, Lovato

Rated frequency: 50-60Hz Auxiliary supply voltage: LPX LP... with steady light: 12...30VAC/DC 85...140VAC 185...265VAC Maximum consumption for: LPX LP... steady light and LPX LF... flashing Iight: 17mA-0.50W (12...30VAC/DC) 20mA-0.40W (85...140VAC) 18mA-0.55W (185...265VAC) Total protection for LPX LP... and LPX LF... types: Against overvoltages Against stray currents in wiring To reduce flickering phenomenon To withstand vibrations Electrical life: 100,000 hours Snap onto LPX AU120 mounting adapter in the middle position for each illuminated actuator, also internally on the LPZ control station cover No other element can be stacked behind LED elements Any mounting position allowed Maximum tightening torque: 1Nm/0.741bft Ambient conditions: Operating temperature: -25 ...+70°C (-25...+60°C for LPX LE...) Storage temperature: -40...+85°C

Product Detail

New items

LPXLPBM5, Lovato

Rated frequency: 50-60Hz Auxiliary supply voltage: LPX LP... with steady light: 12...30VAC/DC 85...140VAC 185...265VAC Maximum consumption for: LPX LP... steady light and LPX LF... flashing Iight: 17mA-0.50W (12...30VAC/DC) 20mA-0.40W (85...140VAC) 18mA-0.55W (185...265VAC) Total protection for LPX LP... and LPX LF... types: Against overvoltages Against stray currents in wiring To reduce flickering phenomenon To withstand vibrations Electrical life: 100,000 hours Snap onto LPX AU120 mounting adapter in the middle position for each illuminated actuator, also internally on the LPZ control station cover No other element can be stacked behind LED elements Any mounting position allowed Maximum tightening torque: 1Nm/0.741bft Ambient conditions: Operating temperature: -25 ...+70°C (-25...+60°C for LPX LE...) Storage temperature: -40...+85°C

Product Detail

Contact Blocks & Light Blocks

New Items

LPXLPBB3, Lovato

LPXCB10, Lovato

LPXLPBB6, Lovato

LPXLPBB4, Lovato

ZB6EG1B, Schneider Electric

ZBE502, Schneider Electric

A22NZ-S-P1AN, Omron

A22NZ-S-P1BN, Omron

8LM2TC10, Lovato

LPXLPE5, Lovato

LPXLPBM3, Lovato

LPXLPBM5, Lovato

FAQs