Battery Chargers

New items

1001-0063-UK, Ansmann

Ansmann Battery Pack Charger The Ansmann battery pack charger is an intelligent battery charger that can charge 1 or 2 batteries. It is suitable for charging up to 2 NiMH or NiCd 9V batteries. Each slot charges independently and the charger automatically starts charging when the batteries are inserted. The charger also has coloured LED indicator lights to let you know how your batteries are getting on. Features and Benefits Automatically switches to trickle charging when battery is full Individual supervision of each battery Operating temperature ranges between 0°C and 30°C Safety timer cut off Charging current for 9V: 2 x 70 mA Suitable for 8.4V NiMH and NiCD rechargeable PP3 9V batteries Worldwide Voltage: 100-240V AC 50-60 Hz Faulty Cell Detection Charging Status LED Indicators Battery Full detection Individually controlled charging slots Multiple overcharging protection, -dV and safety timer. Fast charger Complete with UK 3-Pin plug and 2-Pin EU plug No batteries included Certifications CE certified IP20 rated UL94V-0

Product Detail

New items

2019-3003, Ansmann

Ansmann Battery Charger The Ansmann Travel charger is a NiMH/NiCd battery charger. This charger allows 3 to 10 cells of NiCd or NiMH in packs to be charged automatically, up to a capacity of 10000mAh. The microprocessor-controlled charging guarantees an optimum charge and gentle care of the battery packs. The partly discharged batteries can be charged without the danger of overcharging due to the delta peak cut-off. The switch-mode power supplies include a selection of jack plugs for most applications. It will also highlight any problems with the pack using its faulty cells detection circuit. Features and Benefits Short-circuit protection Universal AC mains input Operating temperature ranges between 0°C and 40°C Reverse polarity protected Supplied with an output voltage ranging between 4.2VDC and 14VDC at 800mA Certifications CE certified

Product Detail

New items

2012-3001, Ansmann

Ansmann AC/DC Delta 3 Charger (UK) The Ansmann AC/DC Delta 3 is an INTELLIGENT fast battery pack charger for 6 cell (7.2V) and 7 cell (8.4V) battery packs AC/DC Battery Charger for NiCd/NiMH Battery Packs 100-240V AC 50-60Hz (UK Plug) 12V - 16V DC (Cigar Lighter Plug) For Packs 7.2V to 8.4V 3000-5400mAh Fast charging current 3000mA Trickle Charge 190mA Includes 140min. safety timer Red LED denotes fast charging Green LED denotes trickle charging Integrated TAMIYA type connector Case protection: IP40 Case: ABS plastic UK PLUG "

Product Detail

New items

2240000133, Mascot

Lithium-Ion Charger 3 stage charge control with current detection as charge termination Medical approved (EN 60601) Universal input voltage (90-264Vac) 2-pin IEC 320 input connection 2.1x5.5x12mm output connector (mating connector 656-3901 for 2.1mm straight in line socket to 1.8m unterminated cable, sold separately) For direct connection to a panel socket the mating connection is 487-832 or 448-370 Protected against reversed polarity and short circuit proof LED status indicator Weight:- 115g Mascot Battery Pack Charger The Mascot 1.1A battery pack charger is used for charging 2 cells of lithium-ion batteries. This 3-stage battery charger requires an input voltage that ranges between 90VAC and 264VAC. This lithium-ion battery charger is ideal for medical applications. The 3-stage regime permits the charger to be left connected indefinitely. Its output voltage rating is 8.4V. Warning: To be used only within the allowed parameters Features and Benefits 3-stage charge control with current detection as charge termination Universal input voltage Maximum output power is 9.24W 2-pin IEC 320 input connection Protected against reversed polarity and short circuit proof LED status indicator Certifications EN 60601 Warning Use only within the allowed parameters.

Product Detail

New items

CLM10D-203, Phihong USA

ADAPTER AUTOMOBILE 10W

Product Detail

New items

CEP1H77, CTEK

CTEK MXS 5.0 Battery Charger The MXS 5.0 is an advanced microprocessor controlled battery charger with automatic temperature compensation built in providing unrivalled performance on lead-acid batteries from 1.2Ah up to 110Ah. The MXS 5.0 solves a broad range of battery problems and is the ideal charger for the user with high demands. Features of the MXS 5.0 include diagnosis of battery condition to establish if it can receive and retain charge, patented automatic desulphation step and a special reconditioning step that will revive and restore deeply discharged and stratified batteries. AGM option is perfect for maximising performance and life of most Stop - Start batteries. The built in temperature compensation ensures ideal charging performance even in the most extreme conditions. Patented Float/Pulse maintenance makes the MXS 5.0 ideal for long - term maintenance. The entire process of battery testing, charging and maintenance is easily followed on the clear LED display Comfort Connect compatible: Yes Ambient Temperature -20 ﾟC to +50 ﾟC, output power is reduced automatically at higher temperatures. Cooling: Induction. Charger Type: Eight step, fully automatic charging cycle. Batteries: 12V lead-acid batteries (Wet, MF, AGM, Calcium/Calcium and GEL). Battery size: 1.2-110Ah. Insulation: IP65 EU PLUG Note The MXS 5.0 is a fully automatic 8-step charger that delivers selectable 0.8A or 5A to 12V batteries from 1.2-110Ah. The charger is IP65 rated (splash and dust proof), designed to protect vehicle electronics, non-sparking, reverse polarity protected and short-circuit proof. It also includes a 5 year manufacturer's warranty CTEK Battery Charger The CTEK MXS5.0 lead acid battery charger is an advanced microprocessor-controlled lead-acid device. This high-tech charger has automatic temperature compensation built in that gives an unrivalled perfo...

Product Detail

New items

793-4317, RS PRO

RS Li-Ion Switchmode Chargers The charge control ensures that the batteries receive optimum charge with no overcharging thus maximising the life of the battery. These units are approved for both medical and non-medical applications. Applications: A High Tech Charger Industrial & Medically Approved to Charge Medical, Industrial & Commercial Devices Capacity 0.8 – 10Ah LED Charging Display Wide range input Interchangeable mains plugs High Power Low leakage current ≤100 μA Low standby power Standards Medical – IEC 60601-1, UL2601-1, EN60601-1 Industrial – IEC 60335-2-29, EN 60335-2-29

Product Detail

New items

793-4332, RS PRO

RS High Tech Switchmode Lead Acid Charger High Tech Lead Acid Charger, this charger gives the precise amount of charge required to maximise the life of the battery. The charger differentiates between the different battery capacities and continuously monitors the status of the battery. This charger can be left permanently connected with no adverse effects on the battery. The unit is approved for medical and non-medical applications. Applications: Professional Photography Technology Electric Vehicles Cleaning Machines Mobile Measuring Technology LED Charging Display Wide Range Input Interchangeable mains plugs High Power Lightweight, Compact Size EMC conformity Low standby power

Product Detail

New items

EA-BC 512-21 RT, EA Elektro-Automatik

Automatic Chargers, EA-BC-500 Series Automatic chargers for lead acid batteries Primarily cycled with PFC Wide input range I-U-U-compliant battery charger Polarity reversal protection Incl. adapter for wall mounting Standards EN 60950 EA Elektro-Automatik Battery Charger The EA Elektro-Automatik lead acid battery charger is suitable for charging lead-acid batteries with a capacity up to 300Ah. The units operate using I-U-U characteristics. The battery charger is protected against reverse battery polarity. There follows a boost charge at a constant voltage, limited to one hour. Thereafter the charger switches to trickle charge. The output power rating of 300W. The three LEDs on the front are indicating the actual status of the charging mode. This battery charger has an output voltage of 13.8V and charging current of 20.5A. Features and Benefits The supply voltage is between 90VAC and 264VAC Automatic chargers for lead acid batteries Primarily cycled with PFC Over temperature protection Short-circuit and reverse polarity protection Polarity reversal protection Efficiency is 75% Certifications EN 60950

Product Detail

New items

EA-BC 512-11 RT, EA Elektro-Automatik

Automatic Chargers, EA-BC-500 Series Automatic chargers for lead acid batteries Primarily cycled with PFC Wide input range I-U-U-compliant battery charger Polarity reversal protection Incl. adapter for wall mounting Standards EN 60950

Product Detail

New items

1001-0006-01, Ansmann

Ansmann Powerline 8 Traveller Charger Ansmann Powerline 8 Traveller Charger is an intelligent charger with discharge function including USB charging socket For 1-8 AA/AAA (NiMH/NiCd) cells Discharging of the batteries before charging is possible Individual supervision of each cell Multi-coloured LED indicators show the battery status for each charging slot Multiple over-charging protection per cell Automatic cut-off (-dV) and Trickle charging Faulty cell detection / accidental alkaline insertion detection Reverse polarity protection Technical data Input: 100-240Vac / 50-60Hz (for worldwide use) Charging time for Mignon AA 1000mAh: 2.4h Charging current: 500mA for round cells Discharging current: 200mA for round cells USB charging socket: 5V / 1000mA Ansmann Battery Charger The Ansmann battery charger is an intelligent device with discharge function, including a USB charging socket. It is used for 1 to 8 AA/AAA NiCd and NiMH batteries. Discharging of the batteries before charging is possible. Individual supervision of each cell is possible. Multi-coloured LED indicators show the battery status for each charging slot. Multiple over-charging protection per cell is provided. Features and Benefits Charging time for mignon AA 1000mah is 2.4 hours Input supply voltage ranging from 100VAC to 240VAC/50Hz-60Hz (for worldwide use) Automatic cut-off (-dV) and trickle charging Faulty cell detection/accidental alkaline insertion detection Reverse polarity protection Individual supervision of each cell Applications Mobile phones MP3 players Navigation devices Smartphones Certifications IP20 rated CE certified UL94V approved S20.20:2014 BS EN 61340-5-1:2007

Product Detail

New items

2109-3012, Ansmann

Ansmann Powerline 4 Pro Traveller Charger Ansmann's multifunction charger POWERLINE 4 Pro Traveller Charger - aslo for use with smartphones and mobile phones. Rechargeable batteries can not only be charged very quickly and safely, but with the ANSMANN multifunction charger Powerline 4 Pro, the capactiy (shown in mAh) can be checked too! The Powerline 4 Pro is also perfect for travelling. It can charge rechargeable batteries and USB devices worldwide and also on-the-move in a car or caravan. Suitable for NiMH/NiCd rechargeable batteries USB charging socket included (output: 5V / 1A) Capacity measurement shown in mAh Individual selectable charging programs for each charging slot Adjustable charging currents per charging slot Individual cell supervision Multiple over charging protection Automatic cut-off (-dV) Trickle charge Alkaline and faulty cell detection Reverse polarity protection For worldwide use (100V-240V) or for use in-car (12V) Dimensions: 119 x 67 x 31mm Weight: 310g 3 years warranty

Product Detail

New Items

1001-0063-UK, Ansmann

2019-3003, Ansmann

2012-3001, Ansmann

2240000133, Mascot

CLM10D-203, Phihong USA

CEP1H77, CTEK

793-4317, RS PRO

793-4332, RS PRO

EA-BC 512-21 RT, EA Elektro-Automatik

EA-BC 512-11 RT, EA Elektro-Automatik

1001-0006-01, Ansmann

2109-3012, Ansmann

FAQs