Crimp Butt Splice Terminals

New items

458-0718, RS PRO

RS PRO Heat Shrink Crimp Splices These high quality, watertight crimp splices from RS PRO are made from a transparent coloured polyolefin material, the colour being dependent upon the size of the wire they are suitable for. Each crimp splice is covered with a dual wall heat shrinkable tubing and have a hot melt able inner liner, which when heat is applied shrinks to form a watertight seal when terminating or connecting any wires or cable together. The crimp splice heat shrink tubing offers excellent strain relief, it is both solvent and moisture resistant, as well as offering good physical and electrical properties. Features and Benefits The tubing can be used at a high operating temperature from -55 to 125 °C The heat shrink tube can be installed very quickly Safe and easy to use Minimum shrink temperature of the tubing is 150°C Watertight crimp splice tube Easy to visually inspect Voltage rating 600 V Heat shrink ratio of 1:1 See also RS Pro Heat Shrink Tubing Service Kit Stock No. 458-0645 For suitable RS Pro Crimp Tool, see Stock No. 499-2313 Standards MIL - H - 5606; MIL - L - 23699; MIL - L - 7808; MIL - A - 8243 Splices

Product Detail

New items

809-2369, RS PRO

RS Uninsulated Crimp Parallel Splices Brought to you by RS Pro, these uninsulated crimp parallel splices are made from tubular copper. These non-insulated crimp parallel splices are available for a variety of wire ranges.

Product Detail

New items

809-2379, RS PRO

RS Uninsulated Crimp Parallel Splices Brought to you by RS Pro, these uninsulated crimp parallel splices are made from tubular copper. These non-insulated crimp parallel splices are available for a variety of wire ranges.

Product Detail

New items

809-2388, RS PRO

RS Uninsulated Crimp Butt Splices Uninsulated crimp butt splices made from tubular copper. These non-insulated crimp butt splices are available with a variety wire ranges.

Product Detail

New items

2213800-4, TE Connectivity

TE Connectivity CoolSplice Wire Connectors CoolSplice wire splice connectors suitable for splicing 0.34 mm² to 0.75 mm² solid and stranded wire and producing an industry proven reliable connection. These CoolSplice splice wire connectors use a simple push button termination method allowing easy factory or field installation. When squeezed with pliers the push button terminates the wires by inserting them into an IDC crimp contact. This IDC technology eliminates the need to pre-strip wires and saves installation time. The clear body of these CoolSplice connectors enables visual inspection of the connection and the push buttons are colour coded to aid wire size identification. These CoolSplice IDC wire connectors have gel sealing enabling them to be used in harsh environment applications and offer waterproofing protection up to an IPX8 rating. Features and Benefits Industry proven reliable connection Simple to use push button termination for ease of installation IDC connection technology for time saving installation Gel sealing for use in harsh environment applications Clear body for visual inspection Colour-coded push buttons for wire size identification Applications These CoolSplice IDC wire splice connectors are suitable for use in a wide range of applications. These applications include outdoor lights, commercial refrigeration lighting, lighting display, cabinet lighting, security and alarms systems and audio speaker connections. Standards IEC 60998-2-3

Product Detail

New items

34319, TE Connectivity

TE Connectivity SOLISTRAND Closed Barrel Parallel Splices SOLISTRAND closed barrel parallel splices designed to terminate solid and stranded wire and irregular shaped conductors. These SOLISTRAND closed barrel parallel splices are made from fine grade high conductivity copper with tin plating and have closed barrels with brazed seams that create a uniform metal strength around the barrel. The inner surface of the barrels of these SOLISTRAND parallel splices are either dimpled or serrated for maximum tensile strength and to maximise the electrical contact area after crimping Note For suitable hand crimp tool see stock number 817-325 and stock number 373-308 for die assembly or hand crimp tool stock number 162-3159 TE Connectivity SOLISTRAND Terminals and Splices

Product Detail

New items

323030, TE Connectivity

TE Connectivity SOLISTRAND STRATO-THERM Heat Resistant Parallel Splices SOLISTRAND STRATO-THERM heat resistant parallel splice crimp terminals for use where operating temperatures prevent standard insulated crimps being used. These STRATO-THERM heat resistant parallel splice crimp terminals are made from nickel plated electrolytic copper and are designed to terminate solid and/or stranded conductors. When the terminal is crimped the wire inside is forced into the serrations or dimples of the barrel to maximise the electrical contact area after crimping.The maximum operating temperature for these STRATO-THERM parallel splice crimp terminals is 343°C (650°F). Note For suitable hand crimp tool see stock number 162-3159 TE Connectivity STRATO-THERM Terminals and Splices

Product Detail

New items

34072, TE Connectivity

TE Connectivity PLASTI-GRIP Butt Splice Wire Crimp Terminals PLASTI-GRIP closed barrel butt splice wire crimp terminals made of high conductivity tin plated copper with an expanded high dielectric strength 94V-0 rated vinyl insulation sleeve. The inner barrel of these PLASTI-GRIP butt splice crimp connectors is serrated in order to provide maximum electrical contact and tensile strength after crimping. The funnelled entry on the wire barrel enables the stripped wire to be inserted more easily. TE Connectivity Plasti-Grip Terminals

Product Detail

New items

321280, TE Connectivity

TE Connectivity SOLISTRAND Sight Hole Closed Barrel Butt Splices SOLISTRAND sight hole closed barrel butt splices designed to terminate solid and stranded wire and irregular shaped conductors. These SOLISTRAND sight hole closed barrel butt splices are made from fine grade high conductivity copper with tin plating and have closed barrels with brazed seams that create a uniform metal strength around the barrel. The inner surface of the barrels of these SOLISTRAND sight hole butt splices are either dimpled or serrated for maximum tensile strength and to maximise the electrical contact area after crimping Note For suitable hand crimp tool see stock number 817-325 and stock number 373-308 for die assembly or hand crimp tool stock number 162-3159 TE Connectivity SOLISTRAND Terminals and Splices

Product Detail

New items

DS-18-22-RS, TE Connectivity

Splices Red 0.25 - 1.6 mm² Blue 1.0 - 2.6 mm² Yellow 2.7 - 6.6 mm² Approvals UL Approvals UL Duraseal Heatshrinkable TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint. The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm². Approvals UL Listed

Product Detail

New items

323795, TE Connectivity

TE Connectivity SOLISTRAND STRATO-THERM Heat Resistant Standard Butt Splices SOLISTRAND STRATO-THERM standard type heat resistant butt splice crimp terminals for use where operating temperatures prevent standard insulated crimps being used. These STRATO-THERM heat resistant butt splice crimp terminals are made from nickel plated electrolytic copper and are designed to terminate solid and/or stranded conductors. When the terminal is crimped the wire inside is forced into the serrations or dimples of the barrel to maximise the electrical contact area after crimping.The maximum operating temperature for these STRATO-THERM heat resistant standard butt splice crimp terminals is 343°C (650°F). Note For suitable hand crimp tool see stock number 162-3159 TE Connectivity STRATO-THERM Terminals and Splices

Product Detail

New items

809-2372, RS PRO

RS Uninsulated Crimp Parallel Splices Brought to you by RS Pro, these uninsulated crimp parallel splices are made from tubular copper. These non-insulated crimp parallel splices are available for a variety of wire ranges.

Product Detail

Crimp Butt Splice Terminals

New Items

458-0718, RS PRO

809-2369, RS PRO

809-2379, RS PRO

809-2388, RS PRO

2213800-4, TE Connectivity

34319, TE Connectivity

323030, TE Connectivity

34072, TE Connectivity

321280, TE Connectivity

DS-18-22-RS, TE Connectivity

323795, TE Connectivity

809-2372, RS PRO

FAQs