USB Controllers

New Items

New items

TUSB2036VFR, Texas Instruments

USB Hub Controllers, Texas Instruments Texas Instruments USB hub Controller devices provide multiple downstream ports in compliance with the USB 2.0 specification. As they are implemented as digital state machines rather than microcontrollers, no software programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. Both full-speed and low-speed downstream ports are supported by automatically setting the slew rate according to the speed of the device attached to the ports. USB (Universal Serial Bus), Texas Instruments

Product Detail

New items

BM92A34MWV-ZE2, ROHM

BM92A34MWV-Z is a full function USB Type-C Power Delivery (PD) controller that supports USB Power Delivery using baseband communication. BM92A34MWV-Z includes support for the PD policy engine and communicates with an Embedded Controller or the SoC via host interface. It supports SOP, SOP and SOP" signalling, allowing it to communicate with cable marker ICs, support alternate modes. USB Type-C Specification Compatible USB PD Specification Compatible (BMC-PHY) Supports Display Port Control Automatic Mode without Ext-MCU Two Power Path Control using N-ch MOSFET Drivers with Back Flow Prevention Type-C Cable Orientation Detection Built-in VCONN Switch and VCONN Controller Direct VBUS Powered Operation Supports DFP/UFP/DRP Mode Supports Dead Battery Operation Connected the required initial voltage is 9 V

Product Detail

New Items

TUSB2036VFR, Texas Instruments

BM92A34MWV-ZE2, ROHM

FAQs