Voltage References

New items

LM431AIM3/NOPB, Texas Instruments

Shunt Voltage Reference, Adjustable, LM Series Voltage References, Texas Instruments Precison Fixed and Adjustable Voltage Reference ICs utilsing series, shunt or series/shunt topologies and available in both through-hole and surface mount packages. Voltage References are available with initial accuracies of ±0.02 to ±2%.

Product Detail

New items

MAX6241BESA+, Maxim Integrated

Low 1.0ppm/°C Temperature Coefficient Very Low 1.5μVp-p Noise (0.1Hz to 10Hz) ±0.02% Initial Accuracy ±15mA Output Source and Sink Current Low, 18mW Power Consumption (MAX6225) Industry-Standard Pinout Optional Noise Reduction and Voltage Trim Excellent Transient Response 8-Pin SO Package Available Low 20ppm/1000h Long-Term Stability Stable for All Capacitive Loads Applications/Uses A/D Converters Automated Test Equipment (ATE) Digital Voltmeters High-Accuracy Industrial and Process Control High-Accuracy Reference Standard High-Resolution Analog-to-Digital Precision Current Sources

Product Detail

New items

TS3431CILT, STMicroelectronics

Voltage Reference, Adjustable, STMicroelectronics Voltage References, STMicroelectronics

Product Detail

New items

LT6650CS5#TRMPBF, Analog Devices

Voltage Reference, Up to 2.048V, Linear Technology Linear Technology provides a range of series and shunt precision voltage references. Series voltage references behave like a 3 terminal regulator and shunt voltage references perform like Zener diodes. The LTC voltage references offer accuracy and low drift over time and temperature. .A series voltage reference can also operate in shunt mode; they can draw only load and quiescent current from the input supply. With shunt voltage references the bias current must be set higher. Since shunt voltage references are typically biased with a resistor the voltage reference will work on a range of input voltages. Typical applications include power supply monitor, current loop measurement and control systems, digital voltmeters and 8-bit A/D and D/A reference. Shunt precision voltage references : Accuracy and temperature stability with low noise Series voltage references : Low dropout, low power and excellent line regulation Voltage References, Linear Technology Linear Technology produces a wide range of series and shunt precision voltage references. Series types operate in the same manner as 3-terminal voltage regulators whilst shunt references perform in the same way as zener diodes. Linear Technology voltage references offer accuracy and low drift over time and temperature. Typical applications include precision measurement systems, power supply monitoring, current loop measurement and control systems, digital voltmeters and A/D and D/A references.

Product Detail

New items

ADR434ARMZ, Analog Devices

Voltage Reference, 3.0V to 4.5V, Analog Devices Voltage References, Analog Devices Precison Fixed and Adjustable Voltage Reference ICs utilsing series, shunt or series/shunt topologies and available in both through-hole and surface mount packages. Voltage References are available with initial accuracies of ±0.02 to ±2%.

Product Detail

New items

ADR380ARTZ-REEL7, Analog Devices

Voltage Reference, Up to 2.048V, Analog Devices Voltage References, Analog Devices Precison Fixed and Adjustable Voltage Reference ICs utilsing series, shunt or series/shunt topologies and available in both through-hole and surface mount packages. Voltage References are available with initial accuracies of ±0.02 to ±2%.

Product Detail

New items

AD586KRZ, Analog Devices

Voltage Reference, 5V, Analog Devices Voltage References, Analog Devices Precison Fixed and Adjustable Voltage Reference ICs utilsing series, shunt or series/shunt topologies and available in both through-hole and surface mount packages. Voltage References are available with initial accuracies of ±0.02 to ±2%.

Product Detail

New items

MAX6143AASA10+, Maxim Integrated

Wide (VOUT + 2V) to +40V Supply Voltage Range Excellent Temperature Stability: 3ppm/°C (max) Tight Initial Accuracy: 0.05% (max) Low Noise: 3.8μVP-P (typ at 2.5V Output) Sources up to 30mA Output Current Low Supply Current: 450μA (max at +25°C) Low 0.01μA Shutdown Current Linear Temperature Transducer Voltage Output +2.5V, +3.3V, +4.096V, +5.0V, or +10V Output Voltages Wide Operating Temperature Range: -40°C to +125°C No External Capacitors Required for Stability Applications A/D Converters D/A Converters Digital Voltmeters Threshold Detectors Voltage Regulators

Product Detail

New items

TLE2426ID, Texas Instruments

Virtual Ground Regulators, Texas Instruments Virtual ground generators with a low impedance output equal to half the supply voltage, capable of sourcing and sinking current and acting as a "vitual ground" in analogugue applications. Supply Rail Splitter, Texas Instruments Supply rail voltage splitter and "virtual ground" ICs supplying a low impedance source/sink output at one-half of the input voltage.

Product Detail

New items

MAX6007BEUR+T, Maxim Integrated

Ultra-Low Operating Current: Guaranteed < 1μA Small 3-Pin SOT23 Package Initial Voltage Accuracy: 0.2% Temperature Coefficient: 30ppm/°C max Temperature Range: -40°C to +85°C Factory-Trimmed Output Voltages: +1.25V, +2.048V, +2.5V, +3.0V Wide Operating Range: 1μA to 2mA Applications A/D and D/A Converters Battery-Powered Applications Portable Meters Precision Regulators

Product Detail

New items

LM4040CIM3-3.0/NOPB, Texas Instruments

Shunt Voltage Reference, Fixed, 3V to 10V Voltage References, Texas Instruments Precison Fixed and Adjustable Voltage Reference ICs utilsing series, shunt or series/shunt topologies and available in both through-hole and surface mount packages. Voltage References are available with initial accuracies of ±0.02 to ±2%.

Product Detail

New items

LM431CIM3/NOPB, Texas Instruments

Shunt Voltage Reference, Adjustable, LM Series Voltage References, Texas Instruments Precison Fixed and Adjustable Voltage Reference ICs utilsing series, shunt or series/shunt topologies and available in both through-hole and surface mount packages. Voltage References are available with initial accuracies of ±0.02 to ±2%.

Product Detail

New Items

LM431AIM3/NOPB, Texas Instruments

MAX6241BESA+, Maxim Integrated

TS3431CILT, STMicroelectronics

LT6650CS5#TRMPBF, Analog Devices

ADR434ARMZ, Analog Devices

ADR380ARTZ-REEL7, Analog Devices

AD586KRZ, Analog Devices

MAX6143AASA10+, Maxim Integrated

TLE2426ID, Texas Instruments

MAX6007BEUR+T, Maxim Integrated

LM4040CIM3-3.0/NOPB, Texas Instruments

LM431CIM3/NOPB, Texas Instruments

FAQs