Insulation Testers

New items

1006-336, Megger

Megger MIT 400 mk2 Series Insulation & Continuity Testers Meggers MIT400/2 Series of insulation and continuity testers are designed for testing electrical installation and specialist applications where accurate, reliable and safe testing is essential. Combining the latest range of measurement techniques with new instrument design to provide a state-of-the-art tester that is compact and comfortable to hold. Featuring a redesigned case, back-stand and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating, providing an almost indestructible case. All primary results are displayed in the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display. A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps. Where application- specific test voltages are required that do not appear in the standard ranges. Continuity testing is now faster, a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the "ohms" and "k ohms" ranges. Retained are the 200 mA and 20 mA test options. Typical Applications include:- Manufacturing/production line goods, electrostatic measurement, component testing, battery powered traction and letting equipment, commercial avionics and military land, marine and air communications. Stabilised insulation test voltage 600 V TRMS AC and DC voltage measurement Live circuit detection and protection CAT IV 600 V & IP54 Weatherproof, rated to IP54 Battery Requirements: 6 AA Alkaline or Nickel Metal Hydride (NIMH) Standards IEC1010, HD384 and BS EN 61557 Supplied with Hard carry case complete with red/black silicone test lead set with probes, 1 red & 1 black c...

Product Detail

New items

1006-337, Megger

Megger MIT 410 mk2 Series Insulation & Continuity Testers Meggers MIT410/2 Series of insulation and continuity testers are designed for testing electrical installation and specialist applications where accurate, reliable and safe testing is essential. Combining the latest range of measurement techniques with new instrument design to provide a state-of-the-art tester that is compact and comfortable to hold. Featuring a redesigned case, back-stand and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating, providing an almost indestructible case. All primary results are displayed in the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display. A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps. Where application- specific test voltages are required that do not appear in the standard ranges. Continuity testing is now faster, a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the "ohms" and "k ohms" ranges. Retained are the 200 mA and 20 mA test options. Typical Applications include:- Manufacturing/production line goods, electrostatic measurement, component testing, battery powered traction and letting equipment, commercial avionics and military land, marine and air communications. Stabilised insulation test voltage 600 V TRMS AC and DC voltage measurement Live circuit detection and protection CAT IV 600 V & IP54 Weatherproof, rated to IP54 Battery Requirements: 6 AA Alkaline or Nickel Metal Hydride (NIMH) Standards IEC1010, HD384 and BS EN 61557 Supplied with Hard carry case complete with red/black silicone test lead set with probes, 1 red & 1 black c...

Product Detail

New items

M550P, Gossen Metrawatt

METRISO TECH Insulation Tester The METRISO TECH insulation and resistance measuring instrument allows for quick and effective testing of protective measures in accordance with: DIN VDE 0100, ÖVE-EN 1 (Austria), SEV 1000 (Switzerland) and regulations specific to other countries as well. Insulation measurement per EN 61557-2 / VDE 0413 part 2 Low-resistance measurement per EN 61557-4 / VDE 0413 part 4 Voltage testing and measurement up to 1000 V Intelligent filter: precise and measurement-dependent activation for the measurement of very high resistances Digital and analog display, backlit Indication of dangerous contact voltage LED Acoustic signalling when limit value is exceeded Detection of interference voltage in switch position OFF Overvoltage protection Protects the instrument in the event of inadvertent connection to mains power Fuse link for all resistance measuring ranges Electronic fuse for the protection of low resistance and resistance measurement Rlo and R Compact and rugged for service calls under harsh conditions One measuring point self-test with test resistance of 10 MΩ per IEC/HD 60364-6 / EN 50110 Supplied with METRISO TECH insulation tester, DAkkS calibration certificate, set batteries, carrying strap, alligator clip, KS17-4 cable set, condensed operating instructions, supplement Safety Information, detailed operating instructions for download on the website www.gossenmetrawatt.com

Product Detail

New items

1004-735, Megger

Megger MIT 410 mk2 Series Insulation & Continuity Testers Meggers MIT410/2 Series of insulation and continuity testers are designed for testing electrical installation and specialist applications where accurate, reliable and safe testing is essential. Combining the latest range of measurement techniques with new instrument design to provide a state-of-the-art tester that is compact and comfortable to hold. Featuring a redesigned case, back-stand and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating, providing an almost indestructible case. All primary results are displayed in the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display. A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps. Where application- specific test voltages are required that do not appear in the standard ranges. Continuity testing is now faster, a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the "ohms" and "k ohms" ranges. Retained are the 200 mA and 20 mA test options. Typical Applications include:- Manufacturing/production line goods, electrostatic measurement, component testing, battery powered traction and letting equipment, commercial avionics and military land, marine and air communications. Stabilised insulation test voltage 600 V TRMS AC and DC voltage measurement Live circuit detection and protection CAT IV 600 V & IP54 Weatherproof, rated to IP54 Battery Requirements: 6 AA Alkaline or Nickel Metal Hydride (NIMH) Standards IEC1010, HD384 and BS EN 61557 Supplied with Hard carry case complete with red/black silicone test lead set with probes, 1 red & 1 black c...

Product Detail

New items

1004-740, Megger

Megger MIT 430 mk2 Series Insulation & Continuity Testers Meggers MIT430/2 Series of insulation and continuity testers are designed for testing electrical installation and specialist applications where accurate, reliable and safe testing is essential. Combining the latest range of measurement techniques with new instrument design to provide a state-of-the-art tester that is compact and comfortable to hold. Featuring a redesigned case, back-stand and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating, providing an almost indestructible case. All primary results are displayed in the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display. A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps. Where application- specific test voltages are required that do not appear in the standard ranges. Continuity testing is now faster, a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the "ohms" and "k ohms" ranges. Retained are the 200 mA and 20 mA test options. Typical Applications include:- Manufacturing/production line goods, electrostatic measurement, component testing, battery powered traction and letting equipment, commercial avionics and military land, marine and air communications. Stabilised insulation test voltage 600 V TRMS AC and DC voltage measurement Live circuit detection and protection CAT IV 600 V & IP54 Weatherproof, rated to IP54 Test result storage and Bluetooth® downloading available Rechargeable options for mains and car charging available Battery Requirements: 6 AA Alkaline or Nickel Metal Hydride (NIMH) Standards EC61010 and EN 61557 Supplied with ...

Product Detail

New items

FLUKE 1550C/KIT, Fluke

Fluke 1550, 1555 5kV and 10kV Insulation Tester High voltage insulation tester ideal for testing high voltage equipment including switchgear, motors, generators and cables. Meets requirements of IEEE 43-2000 Capacitance and leakage current measurement Resistance measurements up to 2TΩ (Fluke 1555) Ramp function for breakdown testing Voltage breakdown detection alerts and voltage reading up to 600 V ac or dc for increased user safety 99 measurements storage and recall and PC interface Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) Timer settings up to 99 minutes for timed tests Guard system eliminates the effect of surface leakage current on high-resistance measurements Large LCD display with analogue bargraph Long life lead acid battery with over 750 tests between charges EN 61010 safety rating CAT IV 1000 V, CAT III 1000 V Supplied with Test cables & crocodile clips, infrared USB adaptor, AC power cord, 12V lead acid battery (fitted), FlukeView Forms Basic Software, user manual on CD-ROM, soft carrying case (Fluke 1555 only) Fluke 1550 & 1555 kits include : IP67 hard case, NIST traceable certificate of calibration and additional ruggedized crocodile clips

Product Detail

New items

M550T, Gossen Metrawatt

METRISO PRIME 5000 V High-Voltage Insulation Tester Analog high-voltage insulation measuring instrument with the following voltages: 100, 250, 500 and 1000 V (per EN 61 557 part 1) and 1500, 2000, 2500 and 5000 V. Large measuring range from 10 kΩ to 1 TΩ Easy to read logarithmic display Measuring voltages: 100, 250, 500, 1000, 1500, 2000, 2500 and 5000 V Measurement to 1000 V per DIN VDE 0413 Measuring range: 100 kΩ to 100 MΩ (1000 V) Voltage measurement to 2000 V DC, AC Guard terminal for the elimination of surface current Supplied with METRISO PRIME tester, 2 crocodile clips (5 kV version), carrying strap, operating instructions.

Product Detail

New items

IN2102, Martindale

Triple Voltage Insulation and Continuity Tester Martindale IN2102 A fully specified insulation tester with 250V, 500V & 1000V insulation tests that provides accurate testing and is ideal for single handed operation. The output test voltage is automatically displayed during testing and confirms that the desired test voltage is being developed. The automatic zero adjust removes the resistance of the leads and the test button can be set to be either latching, to give a permanent output, or "press to test". 250V,500V & 1000V insulation test voltages 200mA continuity test current with buzzer below 30Ω 5,000 count backlit digital display with analogue bargraph Displays test voltage Auto HOLD of test readings Automatic discharge of circuit under test Live circuit audible and visible warning Press to test or latching test button mode to give a permanent output on insulation test Automatic zero adjust removes the resistance of the test leads Complies with BS EN 61557 (17th Edition) UK and international standards Complies with EN61010 CAT III 600V Supplied with 6 AA alkaline batteries, instructions, carry case, test leads and crocodile clips.

Product Detail

New items

46119602, Socomec

Product Detail

New items

1004-731, Megger

Megger MIT 400 mk2 Series Insulation & Continuity Testers Meggers MIT400/2 Series of insulation and continuity testers are designed for testing electrical installation and specialist applications where accurate, reliable and safe testing is essential. Combining the latest range of measurement techniques with new instrument design to provide a state-of-the-art tester that is compact and comfortable to hold. Featuring a redesigned case, back-stand and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating, providing an almost indestructible case. All primary results are displayed in the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display. A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps. Where application- specific test voltages are required that do not appear in the standard ranges. Continuity testing is now faster, a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the "ohms" and "k ohms" ranges. Retained are the 200 mA and 20 mA test options. Typical Applications include:- Manufacturing/production line goods, electrostatic measurement, component testing, battery powered traction and letting equipment, commercial avionics and military land, marine and air communications. Stabilised insulation test voltage 600 V TRMS AC and DC voltage measurement Live circuit detection and protection CAT IV 600 V & IP54 Weatherproof, rated to IP54 Battery Requirements: 6 AA Alkaline or Nickel Metal Hydride (NIMH) Standards IEC1010, HD384 and BS EN 61557 Supplied with Hard carry case complete with red/black silicone test lead set with probes, 1 red & 1 black c...

Product Detail

New items

1004-739, Megger

Megger MIT 420 mk2 Series Insulation & Continuity Testers Meggers MIT420/2 Series of insulation and continuity testers are designed for testing electrical installation and specialist applications where accurate, reliable and safe testing is essential. Combining the latest range of measurement techniques with new instrument design to provide a state-of-the-art tester that is compact and comfortable to hold. Featuring a redesigned case, back-stand and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating, providing an almost indestructible case. All primary results are displayed in the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display. A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps. Where application- specific test voltages are required that do not appear in the standard ranges. Continuity testing is now faster, a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the "ohms" and "k ohms" ranges. Retained are the 200 mA and 20 mA test options. Typical Applications include:- Manufacturing/production line goods, electrostatic measurement, component testing, battery powered traction and letting equipment, commercial avionics and military land, marine and air communications. Stabilised insulation test voltage 600 V TRMS AC and DC voltage measurement Live circuit detection and protection CAT IV 600 V & IP54 Weatherproof, rated to IP54 Battery Requirements: 6 AA Alkaline or Nickel Metal Hydride (NIMH) Standards EC1010 and BS EN 61557 Supplied with Hard carry case complete with red/black silicone test lead set with probes, 1 red & 1 black crocodile...

Product Detail

New items

1006-339, Megger

Megger MIT 420 mk2 Series Insulation & Continuity Testers Meggers MIT420/2 Series of insulation and continuity testers are designed for testing electrical installation and specialist applications where accurate, reliable and safe testing is essential. Combining the latest range of measurement techniques with new instrument design to provide a state-of-the-art tester that is compact and comfortable to hold. Featuring a redesigned case, back-stand and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating, providing an almost indestructible case. All primary results are displayed in the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display. A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps. Where application- specific test voltages are required that do not appear in the standard ranges. Continuity testing is now faster, a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the "ohms" and "k ohms" ranges. Retained are the 200 mA and 20 mA test options. Typical Applications include:- Manufacturing/production line goods, electrostatic measurement, component testing, battery powered traction and letting equipment, commercial avionics and military land, marine and air communications. Stabilised insulation test voltage 600 V TRMS AC and DC voltage measurement Live circuit detection and protection CAT IV 600 V & IP54 Weatherproof, rated to IP54 Battery Requirements: 6 AA Alkaline or Nickel Metal Hydride (NIMH) Standards EC1010 and BS EN 61557 Supplied with Hard carry case complete with red/black silicone test lead set with probes, 1 red & 1 black crocodile...

Product Detail

New Items

1006-336, Megger

1006-337, Megger

M550P, Gossen Metrawatt

1004-735, Megger

1004-740, Megger

FLUKE 1550C/KIT, Fluke

M550T, Gossen Metrawatt

IN2102, Martindale

46119602, Socomec

1004-731, Megger

1004-739, Megger

1006-339, Megger

FAQs