Sound Level Meters

GA213 & GA215 Sound Pressure Level Meters 'A' and 'C' frequency weighting (toggle) 'Slow' and 'Fast' Time constants (toggle) Sound Pressure (Lp) to 0.1dB resolution Lmax - maximum Lp hold (rms) Pmax - maximum peak level Elapsed time (running time hrs, min, sec) Overload and Under-range indication Housed in a tough, crack resistant ABS plastic Battery condition (life approx. 24 hours) GA213 Sound Level Meter: A simple-to-use instrument that is fully compliant with IEC 61672-1:2002 Class 2 and IEC 60651:1979 Type 2. This is a necessary requirement for carrying out most noise assessment tasks in industry. Simultaneous rms and peak measurement Designed for use by Industrial Safety Officers, Occupational Nurses and Engineers for general survey use in health and safety and engineering applications. Gives clear results to International standards requirements Simultaneous measurement of Lp, Lmax, and Pmax GA215 Integrating Sound Level Meter: A feature packed instrument that is fully compliant with IEC 61672-1:2002 Class 2, IEC 60651: 1979 Type 2 and IEC 60804: 2001 Type 2. This meter gives simultaneous Leq (rms. average) and peak measurement for assessments to the Noise at Work Regulations 1989 and general engineering applications. Designed for Industrial Safety Officers, Safety Managers and Engineers for compliance with the Health and Safety as Work Act; Noise at Work regulation 1989. Will provide necessary information for completing risk assessments Integrated equivalent level (Leq) measurement Personal Sound Exposure Level (Lex) was Lep'd Simultaneous measurement of Lp, Leq, Lmax and Pmax Note: For compliance with the Noise at Work regulations and relevant international standards, sound level meters should be calibrated before use and checked afterwards. See later in this section for ...

CEL-240 Sound Level Meter Kit Comprehensive CEL-240 sound level instrument kit providing an ideal solution for sound level measurement. Kit comprises: CEL-240 sound level meter see stock no. 477-110 CEL 110//2 sound level meter calibrator see stock no. 253-210 Foam windshield see stock no. 477-093 Hard carry case see stock no. 477-104 3 AA alkaline batteries, 1 PP3 battery and instructions on CD-ROM Available accessories:- Casella Cel Sound Level Meter Kit The Casella Cel CEL-240/K1 is a sound level instrument kit providing an ideal solution for sound level measurement. It consists of CEL-240 sound level meter, CEL 110//2 sound level meter calibrator, foam windshield, 3AA alkaline batteries, 1 PP3 battery, an instruction CD-ROM, and a hard carry case. Features and Benefits 1/4in threaded socket for tripod mounting Fast, slow, and impulse time wEightings Large measurement range from 30dB to 130dB Maximum hold function More than 35hrs of battery life Noise floor is <33dB(A) Robust design Simple 2 button operation Wide range from 30 to 130dB A or C frequency wEighting Slow, Fast and Impulse time wEightings Current, highest and average noise level shown in display Time history trend graphically displayed USB output port to for simple data logging with pc or download of stored data Auto calibration at selected decibel level Scrolling sound level display Applications Building acoustic monitoring Fire alarm testing Machinery noise surveys Occupational noise Product noise Sound level measurement Certifications ANSI S1.4:1983 Type 2 IEC 60651:1979 Type 2 IEC 61672-1:2002 Class 2

GA213 & GA215 Sound Pressure Level Meters 'A' and 'C' frequency weighting (toggle) 'Slow' and 'Fast' Time constants (toggle) Sound Pressure (Lp) to 0.1dB resolution Lmax - maximum Lp hold (rms) Pmax - maximum peak level Elapsed time (running time hrs, min, sec) Overload and Under-range indication Housed in a tough, crack resistant ABS plastic Battery condition (life approx. 24 hours) GA213 Sound Level Meter: A simple-to-use instrument that is fully compliant with IEC 61672-1:2002 Class 2 and IEC 60651:1979 Type 2. This is a necessary requirement for carrying out most noise assessment tasks in industry. Simultaneous rms and peak measurement Designed for use by Industrial Safety Officers, Occupational Nurses and Engineers for general survey use in health and safety and engineering applications. Gives clear results to International standards requirements Simultaneous measurement of Lp, Lmax, and Pmax GA215 Integrating Sound Level Meter: A feature packed instrument that is fully compliant with IEC 61672-1:2002 Class 2, IEC 60651: 1979 Type 2 and IEC 60804: 2001 Type 2. This meter gives simultaneous Leq (rms. average) and peak measurement for assessments to the Noise at Work Regulations 1989 and general engineering applications. Designed for Industrial Safety Officers, Safety Managers and Engineers for compliance with the Health and Safety as Work Act; Noise at Work regulation 1989. Will provide necessary information for completing risk assessments Integrated equivalent level (Leq) measurement Personal Sound Exposure Level (Lex) was Lep'd Simultaneous measurement of Lp, Leq, Lmax and Pmax Note: For compliance with the Noise at Work regulations and relevant international standards, sound level meters should be calibrated before use and checked afterwards. See later in this section for ...

SM-10 sound level meter Designed to meet the requirements of those working in the safety and testing sector A and C weightings for checking compliance with safety regulations and acoustic analysis Measuring ranges: A weighting 30 → 130 dB C weighting 35 → 130 dB Frequency range: 31.5 Hz → 8 KHz Display with 0.1 dB steps on 4-digit LCD Slow (1 sec) and fast (125 ms) response time settings to check peak and average noise levels MAX/MIN recording Data Hold to freeze readings on the display Supplied with Carry case, windscreen, user manual and 9 V battery Amprobe Sound Level Meter The Amprobe SM-10 is 8KHz sound level meter with RS calibration. It offers two types of measurements, A and C weighting. The A weighting is for general noise sound level with a measuring range of 30dB to 130dB. The C weighting is for measuring the sound level of acoustic material control in various environments with a measuring range of 35dB to 135dB. It has a 4 digits LCD with 0.1dB steps. This device comes with a carrying case, windscreen, user manual, and 9V battery. Features and Benefits • Data hold to freeze reading on digital display • Maximum/minimum recording • Slow (1sec) and fast (125ms) response settings to check peak and average noise levels Applications • Health and industrial safety offices • Quality control • Safety engineers Certifications • ANSI 1.4 Type 2 • CE certified • IEC 651 Type2

Testo Sound Level Meter 816-1 Testo Sound Level Meter 816-1 can, at the touch of a button, be switched from Slow (1 sec) to Fast (125 ms). It is also possible, again at the touch of a button, to switch between the frequency weighting characteristic curves A and C and vice versa. Characteristic curve A corresponds to the sound pressure sensitivity of the human ear, while characteristic curve C can evaluate low-frequency components of a noise. The 816-1 integrated data store allows storage of more than 30,000 measurement values that can be administered using the software included. Additionally, the supplied software allows online measurements over a longer period to be carried out. Applications of the 816-1 include sound level measurements at workplaces, in industrial and production halls, and in public places. The instrument is powered by AA (x4) batteries. Sound level measurement accuracy to IEC 61672-1 class 2 and ANSI S1.4 Type 2 Frequency weighting A and C Integrated data storage for up to 31,000 measurement values Software for data management and long-term measurement Switchable time weighting Fast/Slow Bar graph display Backlit display AC and DC output for the connection of other instruments Supplied with Microphone, wind protection, PC software, connection cable, manual on CD, batteries, system case Testo Sound Level Meter The Testo 816-1 is an 8KHz sound level meter. It is an ideal instrument for the evaluation of sound level measurements. The fast/slow button enables you to set the measurement time between 1s and 125ms. The frequency analysis can be obtained from characteristic curve A to C where curve A corresponds to the sound pressure sensitivity of the human ear and curve C evaluates the low-frequency components of a sound. This meter can measure the sound levels between 30dB and 130dB. The 816-1 integrated data store allows stor...

CEL-240 Sound Level Meter CEL-240 is an easy to use instrument designed to undertake noise measurements for a variety of applications.,By implementing the latest digital technology, the CEL-240 gives absolute reliability, ensuring the highest levels of accuracy and performance, all housed in a rugged and compact design.,With the graphical display the CEL-240 can display the time-history of noise levels, allowing an easy assessment of the current noise environment. Fully compliant with IEC 61672 2002 class 2; IEC 60651 type 2 (1979) 30 – 130dB RMS measurement range A and C weighted sound levels Selectable Fast, slow or impulse time weighting 2 key operation for intuitive ease of use Simultaneous display of instantaneous and maximum sound pressure level measurement Bargraph or graphical time-history display of noise levels, allowing an easy assessment of the current noise environment. Maximum hold function Easy calibration, the CEL-240 automatically recognises the application of a calibrator and with a single key press adjusts the calibration AC output provided for DAT tape / PC wav file recording or headphone applications Available options and accessories:- CEL-240 sound level instrument kit see stock no. 477-100 Kit comprises: Hard carry case, CEL-240 sound level meter, CEL 110//2 sound level calibrator, foam windshield and 3 AA alkaline batteries Replacement foam windshield see stock no. 477-093 USB standard A to mini B interface cable see stock no. 656-3939 Hard carry case see stock no. 477-104 Supplied with 3 AA alkaline batteries, windshield and carry strap. Casella Cel Sound Level Meter The Casella Cel CEL-240 is a 30dB to 130dB digital sound level meter. It is designed using the latest digital technology with 2-key operations. This device can easily specify the frequency wEighting and time wEighting. ...